77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.

Toy State International Ltd. Web Wheelie RC

FCC ID Filing: V9Q-77060R24
Purchase on Amazon: Web Wheelie RC

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Page 2 of 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Page 3 of 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Page 4 of 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Page 5 of 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Page 6 of 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Page 7 of 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Page 8 of 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Page 9 of 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Page 10 of 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Page 11 of 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Page 12 of 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Page 13 of 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Page 14 of 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Page 15 of 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Page 16 of 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Page 17 of 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Page 18 of 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Page 19 of 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.

TEST REPORT
Report No.: 17010086HKG-002R1
Toy State International Limited
Application
For
Certification
(Original Grant)
(FCC ID: V9Q-77060R24)
Transceiver
This report supersedes previous report with report number 17010086HKG-002 dated
February 28, 2017.
Prepared and Checked by:
Signed On File
Lok Chi Hang, Wil
Engineer
Approved by:
Digitally signed by
Kenneth Wong
Location: Intertek
Testing Services
Hong Kong Ltd.
Wong Kwok Yeung, Kenneth
Senior Lead Engineer
Date: March 13, 2017
Intertek's standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/.
The test report only allows to be revised within the retention period unless further standard or the requirement was noticed.
This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and
liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the
agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and
then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be
approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the
material, product, or service is or has ever been under an Intertek certification program.
© 2016 Intertek
Intertek Testing Services Hong Kong Ltd.
2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong.
Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com
INTERTEK TESTING SERVICES
GENERAL INFORMATION
Grantee:
Grantee Address:
Contact Person:
Tel:
Fax:
e-mail:
Manufacturer:
Manufacturer Address:
Brand Name:
Model:
Asst. No.:
Type of EUT:
Description of EUT:
Serial Number:
FCC ID:
Date of Sample Submitted:
Date of Test:
Report No.:
Report Date:
Environmental Conditions:
Toy State International Limited
Unit 905, 9/F., West Wing, Tsim Sha Tsui Centre,
66 Mody Road, Tsim Sha Tsui East,
Kowloon, Hong Kong.
Cheung Yiuchung
0755-3680 6243
0755-2870 0487
N/A
Toy State International Limited
Unit 905, 9/F., West Wing, Tsim Sha Tsui Centre,
66 Mody Road, Tsim Sha Tsui East,
Kowloon, Hong Kong.
MARVEL
77061
77060
Transceiver
Web Wheelie RC
N/A
V9Q-77060R24
January 04, 2017
January 04, 2017 to February 28, 2017
17010086HKG-002R1
March 13, 2017
Temperature: +10 to 40°C
Humidity: 10 to 90%
Report No.: 17010086HKG-002R1
FCC ID: V9Q-77060R24
INTERTEK TESTING SERVICES
SUMMARY OF TEST RESULT
TEST SPECIFICATION
Radiated Emission
Radiated Emission on the Bandedge
Radiated Emission in Restricted Bands
REFERENCE
RESULTS
15.249, 15.209
Pass
15.205
Pass
The equipment under test is found to be complying with the following standards:
FCC Part 15, October 1, 2015 Edition
Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is
considered sufficient to comply with the pervisions of this section.
2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained
within the frequency band designated (mentioned as above) which the EUT operated. The
effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and
frequency stability over excepted variations in temperature and supply voltage were considered.
3. Please refer TY-S17-0046 Letter issued on March 13, 2017 for amendment/ supersede
notification.
Report No.: 17010086HKG-002R1
FCC ID: V9Q-77060R24
ii
INTERTEK TESTING SERVICES
Table of Contents
1.0
General Description .............................................................................................. 1
1.1
Product Description ............................................................................................. 1
1.2
Related Submittal(s) Grants................................................................................. 1
1.3
Test Methodology ................................................................................................ 1
1.4
Test Facility ......................................................................................................... 1
2.0
System Test Configuration................................................................................... 2
2.1
Justification .......................................................................................................... 2
2.2
EUT Exercising Software ..................................................................................... 2
2.3
Special Accessories ............................................................................................ 2
2.4
Measurement Uncertainty.................................................................................... 2
2.5
Support Equipment List and Description .............................................................. 2
3.0
Emission Results .................................................................................................. 3
3.1
Field Strength Calculation .................................................................................... 3
3.2
Radiated Emission Configuration Photograph ..................................................... 4
3.3
Radiated Emission Data ...................................................................................... 4
4.0
Equipment Photographs....................................................................................... 8
5.0
Product Labelling .................................................................................................. 8
6.0
Technical Specifications ...................................................................................... 8
7.0
Instruction Manual ................................................................................................ 8
8.0
Miscellaneous Information ................................................................................... 9
8.1
Radiated Emission on the Bandedge................................................................... 9
8.2
Discussion of Pulse Desensitization .................................................................. 10
8.3
Calculation of Average Factor............................................................................ 10
8.4
Emissions Test Procedures ............................................................................... 12
9.0
Equipment List .................................................................................................... 15
Report No.: 17010086HKG-002R1
FCC ID: V9Q-77060R24
iii
INTERTEK TESTING SERVICES
1.0
General Description
1.1
Product Description
The Equipment Under Test (EUT) is a 2.4GHz RC car operating from 24102475MHz with 1MHz channel spacing. The EUT is powered by 6X1.5V AA
batteries. After switch on the EUT and paired with Controller, the RC Car can
be controlled to move forward, backward, turn left/right.
Antenna Type: Internal, Integral
For electronic filing, the brief circuit description is saved with filename: descri.pdf.
1.2
Related Submittal(s) Grants
This is a single application for certification of a transceiver.
The Certification procedure of controller for this transceiver (with FCC ID: V9Q77060T24) is being processed as the same time of this application.
1.3
Test Methodology
Radiated emission measurements was performed according to the
procedures in ANSI C63.10 (2013).
All radiated measurements were
performed in an 3m Chamber. Preliminary scans were performed in the
3m Chamber only to determine worst case modes. All radiated tests were
performed at an antenna to EUT distance of 3 meters, unless stated
otherwise in the “Justification Section” of this Application.
1.4
Test Facility
The 3m Chamber facility used to collect the radiated data is located at
Workshop No. 3, G/F., World-Wide Industrial Centre, 43-47 Shan Mei Street, Fo
Tan, Sha Tin, N.T., Hong Kong. This test facility and site measurement data
have been placed on file with the FCC.
Report No.: 17010086HKG-002R1
FCC ID: V9Q-77060R24
1 of 15
INTERTEK TESTING SERVICES
2.0
System Test Configuration
2.1
Justification
The system was configured for testing in a typical fashion (as a customer would
normally use it), and in the confines as outlined in ANSI C63.10 (2013).
The device was powered by new 6 x 1.5V AA batteries.
For maximizing emissions, the EUT was rotated through 360°, the antenna
height was varied from 1 meter to 4 meters above the ground plane, and the
antenna polarization was changed. This step by step procedure for maximizing
emissions led to the data reported in Exhibit 3.0.
The unit was operated standalone and placed in the center of the turntable.
The equipment under test (EUT) was configured for testing in a typical fashion
(as a customer would normally use it). The EUT was mounted to a plastic stand
if necessary and placed on the wooden turntable, which enabled the engineer to
maximize emissions through its placement in the three orthogonal axes.
2.2
EUT Exercising Software
There was no special software to exercise the device.
powered up, it transmits the RF signal continuously.
2.3
Once the unit is
Special Accessories
There are no special accessories necessary for compliance of this product.
2.4
Measurement Uncertainty
When determining of the test conclusion, the Measurement Uncertainty of test
has been considered.
2.5
Support Equipment List and Description
N/A.
Report No.: 17010086HKG-002R1
FCC ID: V9Q-77060R24
2 of 15
INTERTEK TESTING SERVICES
3.0
Emission Results
Data is included of the worst case configuration (the configuration which resulted
in the highest emission levels). A sample calculation, configuration photographs
and data tables of the emissions are included.
3.1
Field Strength Calculation
The field strength is calculated by adding the Antenna Factor and Cable Factor,
and subtracting the Amplifier Gain (if any), Average Factor (optional) from the
measured reading. The basic equation with a sample calculation is as follows:
FS = RA + AF + CF - AG - AV
where
FS = Field Strength in dBµV/m
RA = Receiver Amplitude (including preamplifier) in dBµV
CF = Cable Attenuation Factor in dB
AF = Antenna Factor in dB
AG = Amplifier Gain in dB
AV = Average Factor in dB
In the following table(s), the reading shown on the data table reflects the preamplifier
gain. An example for the calculations in the following table is as follows:
FS = RR + LF
where
FS = Field Strength in dBµV/m
RR = RA - AG - AV in dBµV
LF = CF + AF in dB
Assume a receiver reading of 52.0 dBµV is obtained. The antenna factor of
7.4 dB and cable factor of 1.6 dB are added. The amplifier gain of 29 dB and
average factor of 5 dB are subtracted, giving a field strength of 27 dBµV/m.
This value in dBµV/m was converted to its corresponding level in µV/m.
RA = 52.0 dBµV/m
AF = 7.4 dB
CF = 1.6 dB
AG = 29.0 dB
AV = 5.0 dB
FS = RR + LF
FS = 18 + 9 = 27 dBµV/m
RR = 18.0 dBµV
LF = 9.0 dB
Level in µV/m = Common Antilogarithm [(27 dBµV/m)/20] = 22.4 µV/m
Report No.: 17010086HKG-002R1
FCC ID: V9Q-77060R24
3 of 15
INTERTEK TESTING SERVICES
3.2
Radiated Emission Configuration Photograph
The worst case in radiated emission was found at 2400 MHz
For electronic filing, the worst case radiated emission configuration photographs
are saved with filename: radiated photos.pdf.
3.3
Radiated Emission Data
The data on the following page lists the significant emission frequencies, the
limit and the margin of compliance. Numbers with a minus sign are below the
limit.
Judgment: Passed by 18.2 dB
Report No.: 17010086HKG-002R1
FCC ID: V9Q-77060R24
4 of 15
INTERTEK TESTING SERVICES
Applicant: Toy State International Limited
Model: 77061
Worst-Case Operating Mode: Transmitting
Date of Test: February 28, 2017
Table 1
Radiated Emissions
Pursuant to FCC Part 15 Section 15.249 Requirement
Lowest Channel
Polari- Frequency
zation
(MHz)
2410.000
2400.000
4820.000
7230.000
9640.000
12050.000
14460.000
Polarization
Reading
(dBμV)
74.8
59.4
39.2
38.5
39.7
43.8
45.2
Frequency
(MHz)
2410.000
2400.000
4820.000
7230.000
9640.000
12050.000
14460.000
Pre-Amp Antenna
Net at
Average Calculated
Gain
Factor 3m - Peak Factor
at 3m
(dB)
(dB)
(dBμV/m)
(dB)
(dBμV/m)
33
29.4
71.2
22.3
48.9
33
29.4
55.8
22.3
33.5
33
34.9
41.1
22.3
18.8
33
37.9
43.4
22.3
21.1
33
40.4
47.1
22.3
24.8
33
40.5
51.3
22.3
29.0
33
40.0
52.2
22.3
29.9
Reading
(dBμV)
74.8
59.4
39.2
38.5
39.7
43.8
45.2
Pre-Amp
Gain
(dB)
33
33
33
33
33
33
33
Antenna
Factor
(dB)
29.4
29.4
34.9
37.9
40.4
40.5
40.0
Net at
3m - Peak
(dBμV/m)
71.2
55.8
41.1
43.4
47.1
51.3
52.2
Average Limit
at 3m
(dBμV/m)
94.0
54.0
54.0
54.0
54.0
54.0
54.0
Peak Limit
at 3m
(dBμV/m)
114.0
74.0
74.0
74.0
74.0
74.0
74.0
Margin
(dB)
-45.1
-20.5
-35.2
-32.9
-29.2
-25.0
-24.1
Margin
(dB)
-42.8
-18.2
-32.9
-30.6
-26.9
-22.7
-21.8
NOTES: 1. Peak Detector Data unless otherwise stated.
2. All measurements were made at 3 meters. Harmonic emissions not
detected at the 3-meter distances were measured at 0.3-meter and an
inverse proportional extrapolation was performed to compare the signal
level to the 3-meter limit. No other harmonic emissions than those
reported were detected at a test distance of 0.3-meter.
3. Negative sign in the column shows value below limit.
4. Horn antenna is used for the emission over 1000MHz.
5. Emission (the row indicated by bold italic) within the restricted band meets
the requirement of FCC Part 15 Section 15.205.
6. Measurement Uncertainty is ±5.3dB at a level of confidence of 95%.
Report No.: 17010086HKG-002R1
FCC ID: V9Q-77060R24
5 of 15
INTERTEK TESTING SERVICES
Applicant: Toy State International Limited
Model: 77061
Worst-Case Operating Mode: Transmitting
Date of Test: February 28, 2017
Table 2
Radiated Emissions
Pursuant to FCC Part 15 Section 15.249 Requirement
Middle Channel
Polari- Frequency
zation
(MHz)
2440.000
4880.000
7320.000
9760.000
12200.000
14640.000
Polarization
Frequency
(MHz)
2440.000
4880.000
7320.000
9760.000
12200.000
14640.000
Reading
(dBμV)
74.7
39.4
38.3
39.6
43.8
47.0
Pre-Amp Antenna
Factor
Gain
(dB)
(dB)
33
29.4
33
34.9
33
37.9
33
40.4
33
40.5
33
38.4
Reading
(dBμV)
74.7
39.4
38.3
39.6
43.8
47.0
Pre-Amp
Gain
(dB)
33
33
33
33
33
33
Net at
3m - Peak
(dBμV/m)
71.1
41.3
43.2
47.0
51.3
52.4
Antenna
Factor
(dB)
29.4
34.9
37.9
40.4
40.5
38.4
Average
Factor
(dB)
22.3
22.3
22.3
22.3
22.3
22.3
Calculated
at 3m
(dBμV/m)
48.8
19.0
20.9
24.7
29.0
30.1
Net at
3m - Peak
(dBμV/m)
71.1
41.3
43.2
47.0
51.3
52.4
Peak Limit
at 3m
(dBμV/m)
114.0
74.0
74.0
74.0
74.0
74.0
Average Limit
at 3m
(dBμV/m)
94.0
54.0
54.0
54.0
54.0
54.0
Margin
(dB)
-42.9
-32.7
-30.8
-27.0
-22.7
-21.6
NOTES: 1. Peak Detector Data unless otherwise stated.
2. All measurements were made at 3 meters. Harmonic emissions not
detected at the 3-meter distances were measured at 0.3-meter and an
inverse proportional extrapolation was performed to compare the signal
level to the 3-meter limit. No other harmonic emissions than those
reported were detected at a test distance of 0.3-meter.
3. Negative sign in the column shows value below limit.
4. Horn antenna is used for the emission over 1000MHz.
5. Emission (the row indicated by bold italic) within the restricted band meets
the requirement of FCC Part 15 Section 15.205.
6. Measurement Uncertainty is ±5.3dB at a level of confidence of 95%.
Report No.: 17010086HKG-002R1
FCC ID: V9Q-77060R24
6 of 15
INTERTEK TESTING SERVICES
Applicant: Toy State International Limited
Model: 77061
Worst-Case Operating Mode: Transmitting
Date of Test: February 28, 2017
Table 3
Radiated Emissions
Pursuant to FCC Part 15 Section 15.249 Requirement
Highest Channel
Polari- Frequency
zation
(MHz)
2475.000
2483.500
4950.000
7425.000
9900.000
12375.000
14850.000
Polarization
Reading
(dBμV)
74.4
59.2
39.3
38.7
39.9
43.7
46.7
Frequency
(MHz)
2475.000
2483.500
4950.000
7425.000
9900.000
12375.000
14850.000
Pre-Amp Antenna
Net at
Average Calculated
Gain
Factor 3m - Peak Factor
at 3m
(dB)
(dB)
(dBμV/m)
(dB)
(dBμV/m)
33
29.4
70.8
22.3
48.5
33
29.4
55.6
22.3
33.3
33
34.9
2.0
22.3
-20.3
33
37.9
43.6
22.3
21.3
33
40.4
47.3
22.3
25.0
33
40.5
51.2
22.3
28.9
33
38.4
52.1
22.3
29.8
Reading
(dBμV)
74.4
59.2
39.3
38.7
39.9
43.7
46.7
Pre-Amp
Gain
(dB)
33
33
33
33
33
33
33
Antenna
Factor
(dB)
29.4
29.4
34.9
37.9
40.4
40.5
38.4
Net at
3m - Peak
(dBμV/m)
70.8
55.6
41.2
43.6
47.3
51.2
52.1
Average Limit
at 3m
(dBμV/m)
94.0
54.0
54.0
54.0
54.0
54.0
54.0
Peak Limit
at 3m
(dBμV/m)
114.0
74.0
74.0
74.0
74.0
74.0
74.0
Margin
(dB)
-45.5
-20.7
-74.3
-32.7
-29.0
-25.1
-24.2
Margin
(dB)
-43.2
-18.4
-32.8
-30.4
-26.7
-22.8
-21.9
NOTES: 1. Peak Detector Data unless otherwise stated.
2. All measurements were made at 3 meters. Harmonic emissions not
detected at the 3-meter distances were measured at 0.3-meter and an
inverse proportional extrapolation was performed to compare the signal
level to the 3-meter limit. No other harmonic emissions than those
reported were detected at a test distance of 0.3-meter.
3. Negative sign in the column shows value below limit.
4. Horn antenna is used for the emission over 1000MHz.
5. Emission (the row indicated by bold italic) within the restricted band meets
the requirement of FCC Part 15 Section 15.205.
6. Measurement Uncertainty is ±5.3dB at a level of confidence of 95%.
Report No.: 17010086HKG-002R1
FCC ID: V9Q-77060R24
7 of 15
INTERTEK TESTING SERVICES
4.0
Equipment Photographs
For electronic filing, the photographs are saved with filename: external photos.pdf
and internal photos.pdf.
5.0
Product Labelling
For electronics filing, the FCC ID label artwork and the label location are saved
with filename: label.pdf.
6.0
Technical Specifications
For electronic filing, the block diagram and schematic of the tested EUT are
saved with filename: block.pdf and circuit.pdf respectively.
7.0
Instruction Manual
For electronic filing, a preliminary copy of the Instruction Manual is saved with
filename: manual.pdf.
This manual will be provided to the end-user with each unit sold/leased in the
United States.
Report No.: 17010086HKG-002R1
FCC ID: V9Q-77060R24
8 of 15
INTERTEK TESTING SERVICES
8.0
Miscellaneous Information
The miscellaneous information includes details of the test procedure and
measured bandwidth / calculation of factor such as pulse desensitization and
averaging factor (calculation and timing diagram).
8.1
Radiated Emission on the Bandedge
The test data of bandedge emissions were shown on the above radiated
emissions table 1 and table 3 respectively.
Emissions radiated outside of the specified frequency bands, except harmonics,
are attenuated by 50dB below the level of the fundamental or to the general
radiated emissions limits in Section 15.209, whichever is the lesser attenuation,
which meet the requirement of part 15.249(d).
The resultant field strength meets the general radiated emission limit in
section 15.209, which does not exceed 74 dBμV/m (Peak Limit) but exceeded
54 dBμV/m (Average Limit).
Report No.: 17010086HKG-002R1
FCC ID: V9Q-77060R24
9 of 15
INTERTEK TESTING SERVICES
8.2
Discussion of Pulse Desensitization
Pulse desensitivity is not applicable for this device. The effective period (Teff)
is approximately 2.56 ms for a digital “1” bit which illustrated on technical
specification, with a resolution bandwidth (3dB) of 1MHz, so the pulse
desensitivity factor is 0dB.
8.3
Calculation of Average Factor
The duty cycle is simply the on-time divided by the period:
The duration of one cycle = 100 ms
Effective period of the cycle = 2.56*3 = 7.68ms
DC = 7.68/100 = 0.0768ms
Therefore, the averaging factor is found by 20log 0.0768 = -22.3dB.
Report No.: 17010086HKG-002R1
FCC ID: V9Q-77060R24
10 of 15
INTERTEK TESTING SERVICES
Average Factor
Report No.: 17010086HKG-002R1
FCC ID: V9Q-77060R24
11 of 15
INTERTEK TESTING SERVICES
8.4
Emissions Test Procedures
The following is a description of the test procedure used by Intertek Testing
Services Hong Kong Ltd. in the measurements of transmitter operating under
the Part 15, Subpart C rules.
The transmitting equipment under test (EUT) is placed on a wooden turntable
which is four feet in diameter and approximately 0.8m in height above the
ground plane for emission measurement at or below 1GHz and 1.5m in height
above the ground plane for emission measurement above 1GHz. During the
radiated emissions test, the turntable is rotated and any cables leaving the EUT
are manipulated to find the configuration resulting in maximum emissions. The
EUT is adjusted through all three orthogonal axis to obtain maximum emission
levels. The antenna height and polarization are also varied during the testing to
search for maximum signal levels. The height of the antenna is varied from
one to four meters.
Detector function for radiated emissions is in peak mode. Average readings, when
required, are taken by measuring the duty cycle of the equipment under test and
subtracting the corresponding amount in dB from the measured peak readings. A
detailed description for the calculation of the average factor can be found in Exhibit 8.3.
The frequency range scanned is from the lowest radio frequency signal
generated in the device which is greater than 9 kHz to the tenth harmonic of the
highest fundamental frequency or 40 GHz, whichever is lower.
Report No.: 17010086HKG-002R1
FCC ID: V9Q-77060R24
12 of 15
INTERTEK TESTING SERVICES
8.4
Emissions Test Procedures (cont’d)
The EUT is warmed up for 15 minutes prior to the test.
AC power to the unit is varied from 85% to 115% nominal and variation in the
fundamental emission field strength is recorded. If battery powered, a new,
fully charged battery is used.
Conducted measurements were made as described in ANSI C63.10 (2013).
The IF bandwidth used for measurement of radiated signal strength was 100 kHz
or greater when frequency is below 1000 MHz. Where pulsed transmissions of
short enough pulse duration warrant, a greater bandwidth is selected according
to the recommendations of Hewlett Packard Application Note 150-2. A discussion
of whether pulse desensitivity is applicable to this unit is included in this report
(See Exhibit 8.1). Above 1000 MHz, a resolution bandwidth of 1 MHz is used.
Transmitter measurements are normally conducted at a measurement distance
of three meters. However, to assure low enough noise floor in the forbidden
bands and above 1 GHz, signals are acquired at a distance of one meter or less. All
measurements are extrapolated to three meters using inverse scaling, unless
otherwise reported. Measurements taken at a closer distance are so marked.
Report No.: 17010086HKG-002R1
FCC ID: V9Q-77060R24
13 of 15
INTERTEK TESTING SERVICES
8.4.1 Radiated Emission Test Setup
The figure below shows the test setup, which is utilized to make these
measurements.
1.0~4.0m
Antenna
Tower
Receiver
Antenna
3m
0.8m
Ground Plane
3m Chamber
□
RF Test
Receiver
Test setup of radiated emissions up to 1GHz
1.0~4.0m
Antenna
Tower
Receiver
Antenna
3m
1.5m
Ground Plane
□
RF Test Spectrum
Analyzer
Test setup of radiated emissions above 1GHz
Report No.: 17010086HKG-002R1
FCC ID: V9Q-77060R24
14 of 15
INTERTEK TESTING SERVICES
9.0
Equipment List
1)
Radiated Emissions Test
Equipment
EMI Test Receiver
Registration No.
EW-3156
Manufacturer
R&S
Model No.
ESR26
Calibration Date
Dec. 06, 2016
Calibration Due Date
Dec. 06, 2017
Equipment
Registration No.
Manufacturer
Model No.
Calibration Date
Calibration Due Date
Log Periodic Antenna
EW-0447
EMCO
3146
May 18, 2016
Nov. 18, 2017
Spectrum Analyzer
EW-2253
R&S
FSP40
Jun. 15, 2016
Jun. 15, 2017
Biconical Antenna
EW-0571
EMCO
3104C
May 18, 2016
Nov. 18, 2017
Double Ridged
Guide Antenna
EW-1133
EMCO
3115
Nov. 05, 2015
May 05, 2017
2)
Bandedge and Average Factor Measurement
Equipment
Spectrum Analyzer
Registration No.
EW-2329
Manufacturer
R&S
Model No.
FSP3
Calibration Date
Aug. 26, 2016
Calibration Due Date
Aug. 26, 2017
END OF TEST REPORT
Report No.: 17010086HKG-002R1
FCC ID: V9Q-77060R24
15 of 15
Download: 77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Mirror Download [FCC.gov]77060R24 Web Wheelie RC Test Report 17010086HKG-002R1 Toy State International Ltd.
Document ID3466995
Application IDxbKqXqaEu3j/Trm4egolIQ==
Document DescriptionTest Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize20.28kB (253493 bits)
Date Submitted2017-07-17 00:00:00
Date Available2017-07-17 00:00:00
Creation Date2017-03-21 14:38:20
Producing SoftwareAcrobat Distiller 8.3.1 (Windows)
Document Lastmod2017-03-21 14:39:19
Document Title17010086HKG-002R1
Document CreatorPScript5.dll Version 5.2.2
Document Author: kennethw

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
XMP Toolkit                     : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39
Format                          : application/pdf
Creator                         : kennethw
Title                           : Microsoft Word - 17010086HKG-002R1.doc
Create Date                     : 2017:03:21 14:38:20+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2017:03:21 14:39:19+08:00
Metadata Date                   : 2017:03:21 14:39:19+08:00
Producer                        : Acrobat Distiller 8.3.1 (Windows)
Document ID                     : uuid:543a6dff-c559-4600-aa38-587ae7e2eaf1
Instance ID                     : uuid:bfc8a961-6185-4bbb-ace0-89f1a738fdfb
Has XFA                         : No
Page Count                      : 19
Author                          : kennethw

Facebook Twitter Google+ RSS © FCCID.io 2017