FCC ID VBLIB500
RFID Tag Reader
by Intelleflex Corporation
Grantee Code: VBL Product Code: IB500
Latest application date: 2008-12-18
FCC ID Device Details
| FCC ID | VBLIB500 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | VBL |
| Product Code | IB500 |
| Applicant Business | Intelleflex Corporation 🇺🇸 |
| Related Domains |  intelleflex.com  tncokenias.org |
| Equipment Class | RFID Tag Reader |
| Test Firm | Compliance Certification Services |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.75-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2008-12-18 |
| 902.75-927.25 MHz | Change in identification of presently authorized equipment. Original FCC ID: NTTSR320 Grant Date: 06/21/2006 | 2007-05-23 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2008-12-18 | PDF 1.7 MB |
| Internal Photos Case | Internal Photos | 2008-12-18 | PDF 92.4 KB |
| Photos External Current Style Case | External Photos | 2008-12-18 | PDF 211.8 KB |
| Photos External NewStyle Case | External Photos | 2008-12-18 | PDF 208.3 KB |
| External Photos | External Photos | 2007-05-23 | PDF 162.4 KB |
| FCC ID label | ID Label/Location Info | 2007-05-23 | PDF 46.8 KB |
| Setup Photos | Test Setup Photos | 2008-12-18 | PDF 294.5 KB |
| Test Report | Test Report | 2008-12-18 | PDF 1.8 MB |
| Authorization Letter | Cover Letter(s) | 2008-12-18 | PDF 1.1 MB |
| C2PC Letter | Cover Letter(s) | 2008-12-18 | PDF 69.2 KB |
| Request for Confidentialit | Cover Letter(s) | 2008-12-18 | PDF 68.8 KB |
| TCB Q and A | Cover Letter(s) | 2008-12-18 | PDF 23.5 KB |
| Agency letter | Cover Letter(s) | 2007-05-23 | PDF 1.1 MB |
| Application letter | Cover Letter(s) | 2007-05-23 | PDF 86.2 KB |
| Authorization letter | Cover Letter(s) | 2007-05-23 | PDF 35.4 KB |
| Antenna Specification | Parts List/Tune Up Info | 2008-12-18 | PDF 49.3 KB |
Application Information
| Application ID | jC/dIr4PzZvM+kglXxG1Kw== |
|---|---|
| Final Action Date | 2008-12-18 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0015060585 |
| Model | IB500 |
| Frequency Range | 902.75-927.25 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RFID Tag Reader |
| Responsible Party | Dean Kawaguchi, RFID Systems Architect, dkawaguchi@intelleflex.com , 408-200-6550 |
| Technical Contact | Thomas Cokenias, T.N. Cokenias Consulting, tom@tncokenias.org , 650 726 1263 |
| Non-Technical Contact | Thomas Cokenias, T.N. Cokenias Consulting, tom@tncokenias.org , 650 726 1263 |
| Test Firm | Thu Chan, Compliance Certification Services, thu.chan@ccsemc.com  , 510-771-1122 |
| TCB Email | mike.kuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change. Output power listed is conducted at the end of the supplied antenna cable. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 26.3 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| jC/dIr4PzZvM+kglXxG1Kw== | 2008-12-18 | Class II permissive change or modification of presently authorized equipment |
| ucm8C8qGiHz0ZayjdLlLiw== | 2007-05-23 | Change in identification of presently authorized equipment. Original FCC ID: NTTSR320 Grant Date: 06/21/2006 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.75-927.25 MHz | 0.7210000 | 15C |
Grants
TCB Grant - Application ucm8C8qGiHz0ZayjdLlLiw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 | Date of Grant: 05/23/2007 Application Dated: 05/23/2007 |
| Intelleflex Corporation |
| 2465 Augustine Drive |
| Santa Clara, CA 95054 |
| Attention: Dean Kawaguchi , RFID Systems Architect |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VBLIB500 |
| Name of Grantee: | Intelleflex Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Tag Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.721 |
| Output power listed is conducted at the end of the supplied antenna cable. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 21.3 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application ucm8C8qGiHz0ZayjdLlLiw==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Intelleflex Corporation 2465 Augustine Drive Santa Clara, CA 95054 United States | Date of Grant: 05/23/2007 Application Dated: 05/23/2007 |
| Attention: Dean Kawaguchi , RFID Systems Architect |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VBLIB500 |
| Name of Grantee: | Intelleflex Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Tag Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.721 |
| Output power listed is conducted at the end of the supplied antenna cable. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 21.3 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.
|
| Mail To: |
| EA384493 |
TCB Grant - Application jC/dIr4PzZvM+kglXxG1Kw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 12/18/2008 Application Dated: 12/17/2008 |
| Intelleflex Corporation |
| 2465 Augustine Drive |
| Santa Clara, CA 95054 |
| Attention: Dean Kawaguchi , RFID Systems Architect |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VBLIB500 |
| Name of Grantee: | Intelleflex Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Tag Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.721 |
| Class II Permissive Change. Output power listed is conducted at the end of the supplied antenna cable. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 26.3 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application jC/dIr4PzZvM+kglXxG1Kw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intelleflex Corporation 2465 Augustine Drive Santa Clara, CA 95054 United States |
Date of Grant: 12/18/2008 Application Dated: 12/17/2008 |
| Attention: Dean Kawaguchi , RFID Systems Architect |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VBLIB500 |
| Name of Grantee: | Intelleflex Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Tag Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.721 |
| Class II Permissive Change. Output power listed is conducted at the end of the supplied antenna cable. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 26.3 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |