FCC ID VBNAHNA-01
AHNA AirScale RRH 4T4R B30 100W
by Nokia Solutions and Networks
Grantee Code: VBN Product Code: AHNA01
Latest application date: 2021-01-12
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2350-2360 MHz | Class II permissive change or modification of presently authorized equipment | 2021-01-12 |
| 2350-2360 MHz | Original Equipment | 2019-02-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2019-08-03 | PDF 827.1 KB |
| Label Info | ID Label/Location Info | 2019-02-04 | PDF 387.6 KB |
| Test Setup Photos | Test Setup Photos | 2021-01-12 | PDF 732.8 KB |
| Test Setup Photos | Test Setup Photos | 2019-08-03 | PDF 286.7 KB |
| Test Report pt 1 | Test Report | 2021-01-12 | PDF 4.9 MB |
| Test Report pt 2 | Test Report | 2021-01-12 | PDF 3.7 MB |
| Test Report | Test Report | 2019-02-04 | PDF 4.7 MB |
| Cover Letter_VBNAHNA-01 | Cover Letter(s) | 2021-01-12 | PDF 576.9 KB |
| POA Letter | Cover Letter(s) | 2021-01-12 | PDF 358.9 KB |
| Qual & Certification Cover Letter | Cover Letter(s) | 2021-01-12 | PDF 546.2 KB |
| Agent Authorization | Cover Letter(s) | 2019-02-04 | PDF 171.1 KB |
| Confidentiality NDA Letter | Cover Letter(s) | 2019-02-04 | PDF 345.1 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2019-02-04 | PDF 373.9 KB |
| Confidentiality Request Letter Short Term | Cover Letter(s) | 2019-02-04 | PDF 528.8 KB |
| Cover Letter AHNA | Cover Letter(s) | 2019-02-04 | PDF 510.4 KB |
| Manufacturers Identifier Letter | Cover Letter(s) | 2019-02-04 | PDF 389.4 KB |
| Mod Description Letter | Cover Letter(s) | 2019-02-04 | PDF 334.3 KB |
| Qualifications and Certifications Letter | Cover Letter(s) | 2019-02-04 | PDF 158.6 KB |
| RF Exposure | RF Exposure Info | 2019-02-04 | PDF 563.6 KB |
| Manual NDA Metadata only | Users Manual | PDF 596 KB | |
| User Manual Metadata only | Users Manual | PDF 4.6 MB | |
| Internal Photos Metadata only | Internal Photos | PDF 1.5 MB | |
| Block Diagram Metadata only | Block Diagram | PDF 447.8 KB | |
| Schematics Metadata only | Schematics | PDF 2.8 MB | |
| Operational Description Metadata only | Operational Description | PDF 447.8 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 447.8 KB | |
| Tune Up Metadata only | Parts List/Tune Up Info | PDF 353.6 KB |
Application Information
| Application ID | istMAxWaDzJRRRVOb4Srug== |
|---|---|
| Final Action Date | 2021-01-12 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0016412652 |
| Model | AHNA-01 |
| Frequency Range | 2350-2360 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | AHNA AirScale RRH 4T4R B30 100W |
| Responsible Party | Steve Mitchell, steve.mitchell@nokia.com  , 972-936-7500 |
| Test Firm | Hernan Noguchi, Nokia, Global Product Compliance Lab, hernan.noguchi@nokia-bell-labs.com  , 908-582-7160 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz) |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power is maximum combined conducted power. Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 7meters from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Compliance with RF exposure requirements has been demonstrated with specific antennas provided by the manufacturer. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. This device supports LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 30. Class II Permissive Change: Add 5G NR Band n30 capability for 5 and 10 MHz single carriers, plus 5+5 MHz multicarrier operation by software update only. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| istMAxWaDzJRRRVOb4Srug== | 2021-01-12 | Class II permissive change or modification of presently authorized equipment |
| q9XUemlxEymhdac5gzl/Nw== | 2019-02-04 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application q9XUemlxEymhdac5gzl/Nw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/04/2019 Application Dated: 02/01/2019 |
| Nokia Solutions and Networks |
| 3201 Olympus Blvd |
| Dallas, TX 75019 |
| Attention: Steve Mitchell |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VBNAHNA-01 |
| Name of Grantee: | Nokia Solutions and Networks |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | AHNA AirScale RRH 4T4R B30 100W |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 2350.0 - 2360.0 | 100.0 | 0.05 PM | 4M50F9W | |
| 27 | 2350.0 - 2360.0 | 100.0 | 0.05 PM | 8M92F9W |
| Output Power is maximum combined conducted power. Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 7meters from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Compliance with RF exposure requirements has been demonstrated with specific antennas provided by the manufacturer. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. This device supports LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 30. |
EAS Grant - Application q9XUemlxEymhdac5gzl/Nw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nokia Solutions and Networks 3201 Olympus Blvd Dallas, TX 75019 United States |
Date of Grant: 02/04/2019 Application Dated: 02/01/2019 |
| Attention: Steve Mitchell |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VBNAHNA-01 |
| Name of Grantee: | Nokia Solutions and Networks |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | AHNA AirScale RRH 4T4R B30 100W |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 2350.0 - 2360.0 | 100.0 | 0.05 PM | 4M50F9W | |
| 27 | 2350.0 - 2360.0 | 100.0 | 0.05 PM | 8M92F9W |
| Output Power is maximum combined conducted power. Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 7meters from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Compliance with RF exposure requirements has been demonstrated with specific antennas provided by the manufacturer. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. This device supports LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 30. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 01/12/2021 Application Dated: 01/12/2021 |
| Nokia Solutions and Networks |
| 3201 Olympus Blvd |
| Dallas, TX 75019 |
| Attention: Steve Mitchell |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VBNAHNA-01 |
| Name of Grantee: | Nokia Solutions and Networks |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | AHNA AirScale RRH 4T4R B30 100W |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 2350.0 - 2360.0 | 100.0 | 0.05 PM | 4M50F9W | |
| 27 | 2350.0 - 2360.0 | 100.0 | 0.05 PM | 8M92F9W | |
| 27 | 2350.0 - 2360.0 | 100.0 | 0.05 PM | 4M46W7W | |
| 27 | 2350.0 - 2360.0 | 100.0 | 0.05 PM | 9M26W7W |
| Output Power is maximum combined conducted power. Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 7meters from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Compliance with RF exposure requirements has been demonstrated with specific antennas provided by the manufacturer. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. This device supports LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 30. Class II Permissive Change: Add 5G NR Band n30 capability for 5 and 10 MHz single carriers, plus 5+5 MHz multicarrier operation by software update only. |
EAS Grant - Application istMAxWaDzJRRRVOb4Srug==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nokia Solutions and Networks 3201 Olympus Blvd Dallas, TX 75019 United States |
Date of Grant: 01/12/2021 Application Dated: 01/12/2021 |
| Attention: Steve Mitchell |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VBNAHNA-01 |
| Name of Grantee: | Nokia Solutions and Networks |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | AHNA AirScale RRH 4T4R B30 100W |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 2350.0 - 2360.0 | 100.0 | 0.05 PM | 4M50F9W | |
| 27 | 2350.0 - 2360.0 | 100.0 | 0.05 PM | 8M92F9W | |
| 27 | 2350.0 - 2360.0 | 100.0 | 0.05 PM | 4M46W7W | |
| 27 | 2350.0 - 2360.0 | 100.0 | 0.05 PM | 9M26W7W |
| Output Power is maximum combined conducted power. Professional installation required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 7meters from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Compliance with RF exposure requirements has been demonstrated with specific antennas provided by the manufacturer. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. This device supports LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 30. Class II Permissive Change: Add 5G NR Band n30 capability for 5 and 10 MHz single carriers, plus 5+5 MHz multicarrier operation by software update only. |
| Mail To: |