FCC ID VE4-MM8-P

Spread Spectrum TX

by Axiometric, LLC

Grantee Code: VE4   Product Code: MM8P
Latest application date: 2014-07-02

FCC ID Device Details

FCC IDVE4-MM8-P
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeVE4
Product CodeMM8P
Applicant BusinessAxiometric, LLC 🇺🇸
Related Domains axiometric.com
Equipment ClassSpread Spectrum TX
Test FirmWashington Laboratories, Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.5-927 MHzClass II permissive change or modification of presently authorized equipment2014-07-02
902.5-927 MHzChange in identification of presently authorized equipment. Original FCC ID: VE4-MM8 Grant Date: 12/16/20082014-06-12

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2014-07-02PDF 2.5 MB
External PhotosExternal Photos2014-07-02PDF 359.6 KB
Label and LocationID Label/Location Info2014-06-12PDF 232.3 KB
Authorization LetterCover Letter(s)2014-07-02PDF 32.8 KB
Permissive Change LetterCover Letter(s)2014-07-02PDF 38.3 KB
Change of ID LetterCover Letter(s)2014-06-12PDF 37 KB
RF Exposure Info MPERF Exposure Info2014-07-02PDF 312.3 KB

Application Information

Application IDma6zDCD2hclIICmxayPAyQ==
Final Action Date2014-07-02
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0016618514
ModelMM8-P
Frequency Range902.5-927 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionSpread Spectrum TX
Responsible PartyFrank Moody, Principle, frank.moody@axiometric.com , 443-472-4154
Technical ContactSteven Koster, Washington Laboratories, LTD, stevek@wll.com , 3012161500
Test FirmSteve Koster, Washington Laboratories, Ltd., stevek@wll.com , 301-216-1500
TCB EmailHotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsModular Approval. Power listed is conducted. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30mm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
ma6zDCD2hclIICmxayPAyQ==2014-07-02Class II permissive change or modification of presently authorized equipment
oe5WRLlweVPynn3ipwMuFQ==2014-06-12Change in identification of presently authorized equipment. Original FCC ID: VE4-MM8 Grant Date: 12/16/2008

Equipment Authorization

FrequencyOutputRules
902.5-927 MHz0.233000015C

Grants

TCB Grant - Application oe5WRLlweVPynn3ipwMuFQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/12/2014

Application Dated: 06/12/2014
Axiometric, LLC
6200 Old Dobbin Lane
Suite 150
Columbia, MD 21045
 
Attention: Frank Moody , Principle

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VE4-MM8-P
Name of Grantee:  Axiometric, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Spread Spectrum TX
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.5  -  927.0 0.233  

Modular Approval. Power listed is conducted. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application oe5WRLlweVPynn3ipwMuFQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Axiometric, LLC
6200 Old Dobbin Lane Suite 150
Columbia, MD 21045
United States
  Date of Grant: 06/12/2014

Application Dated: 06/12/2014
 
Attention: Frank Moody , Principle

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VE4-MM8-P
Name of Grantee:  Axiometric, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Spread Spectrum TX
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.5  -  927.0 0.233  

Modular Approval. Power listed is conducted. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application ma6zDCD2hclIICmxayPAyQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/02/2014

Application Dated: 07/02/2014
Axiometric, LLC
6200 Old Dobbin Lane
Suite 150
Columbia, MD 21045
 
Attention: Frank Moody , Principle

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VE4-MM8-P
Name of Grantee:  Axiometric, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Spread Spectrum TX
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.5  -  927.0 0.233  

Modular Approval. Power listed is conducted. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30mm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application ma6zDCD2hclIICmxayPAyQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Axiometric, LLC
6200 Old Dobbin Lane Suite 150
Columbia, MD 21045
United States
  Date of Grant: 07/02/2014

Application Dated: 07/02/2014
 
Attention: Frank Moody , Principle

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VE4-MM8-P
Name of Grantee:  Axiometric, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Spread Spectrum TX
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.5  -  927.0 0.233  

Modular Approval. Power listed is conducted. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30mm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: