FCC ID VEYCN3200W1
Broadband Digital Transmission System Module
by Vislink Technologies, Inc.
Grantee Code: VEY Product Code: CN3200W1
Latest application date: 2014-09-29
FCC ID Device Details
| FCC ID | VEYCN3200W1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | VEY |
| Product Code | CN3200W1 |
| Applicant Business | Vislink Technologies, Inc. 🇺🇸 |
| Related Domains |  mooersco.com |
| Equipment Class | Broadband Digital Transmission System Module |
| Test Firm | TUV SUD America, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2014-09-29 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: TV7R2SHPN Grant Date: 04/02/2014 | 2014-09-23 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2014-09-29 | PDF 145.8 KB |
| External Photos | External Photos | 2014-09-29 | PDF 625.7 KB |
| External Photos | External Photos | 2014-09-23 | PDF 91.6 KB |
| Sample Host Label | ID Label/Location Info | 2014-09-29 | PDF 48.7 KB |
| Label Information | ID Label/Location Info | 2014-09-23 | PDF 91.8 KB |
| Test Setup Photos | Test Setup Photos | 2014-09-29 | PDF 714.9 KB |
| Test Report | Test Report | 2014-09-29 | PDF 819.6 KB |
| Agency Agreement | Cover Letter(s) | 2014-09-29 | PDF 50.3 KB |
| FCC Cover Letter | Cover Letter(s) | 2014-09-29 | PDF 21 KB |
| Modular Approval Letter | Cover Letter(s) | 2014-09-29 | PDF 2.6 MB |
| Change in ID Permission | Cover Letter(s) | 2014-09-23 | PDF 416.4 KB |
| Change in ID Request | Cover Letter(s) | 2014-09-23 | PDF 55.5 KB |
| RF Exposure | RF Exposure Info | 2014-09-29 | PDF 43.4 KB |
Application Information
| Application ID | RdH0bQfUVV5gvii+V6pONQ== |
|---|---|
| Final Action Date | 2014-09-29 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0016616674 |
| Model | CN3200W1 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Broadband Digital Transmission System Module |
| Responsible Party | Roger Branton, CFO, rbranton@mooersco.com , 941-954-8701 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc. |
| Test Firm | Sam Wismer, TUV SUD America, Inc., swismer@tuvam.com  , 678-341-5924 |
| TCB Email | jwoods@acstestlab.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 and 40 MHz bandwidth mode. Class II Change as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| RdH0bQfUVV5gvii+V6pONQ== | 2014-09-29 | Class II permissive change or modification of presently authorized equipment |
| eJ4kYMcwC3xgipzeXF8STQ== | 2014-09-23 | Change in identification of presently authorized equipment. Original FCC ID: TV7R2SHPN Grant Date: 04/02/2014 |
Equipment Authorization
Grants
TCB Grant - Application RdH0bQfUVV5gvii+V6pONQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 09/29/2014 Application Dated: 09/29/2014 |
| Vislink Technologies, Inc. |
| 240 South Pineapple Avenue |
| Suite 701 |
| Sarasota, FL 34236 |
| Attention: Roger Branton , CFO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VEYCN3200W1 |
| Name of Grantee: | Vislink Technologies, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Broadband Digital Transmission System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0332 | |||
| 15C | 2422.0 - 2452.0 | 0.0209 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 and 40 MHz bandwidth mode. Class II Change as described in this filing. |
EAS Grant - Application RdH0bQfUVV5gvii+V6pONQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Vislink Technologies, Inc. 240 South Pineapple Avenue Suite 701 Sarasota, FL 34236 United States |
Date of Grant: 09/29/2014 Application Dated: 09/29/2014 |
| Attention: Roger Branton , CFO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VEYCN3200W1 |
| Name of Grantee: | Vislink Technologies, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Broadband Digital Transmission System Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0332 | |||
| 15C | 2422.0 - 2452.0 | 0.0209 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 and 40 MHz bandwidth mode. Class II Change as described in this filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 09/23/2014 Application Dated: 09/23/2014 |
| Vislink Technologies, Inc. |
| 240 South Pineapple Avenue |
| Suite 701 |
| Sarasota, FL 34236 |
| Attention: Roger Branton , CFO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VEYCN3200W1 |
| Name of Grantee: | Vislink Technologies, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Broadband Digital Transmission System Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 1.0 | |||
| 15C | 2422.0 - 2452.0 | 1.0 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 142 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 and 40 MHz bandwidth mode. |
EAS Grant - Application eJ4kYMcwC3xgipzeXF8STQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Vislink Technologies, Inc. 240 South Pineapple Avenue Suite 701 Sarasota, FL 34236 United States |
Date of Grant: 09/23/2014 Application Dated: 09/23/2014 |
| Attention: Roger Branton , CFO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VEYCN3200W1 |
| Name of Grantee: | Vislink Technologies, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Broadband Digital Transmission System Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 1.0 | |||
| 15C | 2422.0 - 2452.0 | 1.0 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 142 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 and 40 MHz bandwidth mode. |
| Mail To: |