FCC ID VEYXMODR1W1
802.11 b/g module
by xG Technology, Inc.
Grantee Code: VEY Product Code: XMODR1W1
Latest application date: 2013-09-23
FCC ID Device Details
| FCC ID | VEYXMODR1W1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | VEY |
| Product Code | XMODR1W1 |
| Applicant Business | xG Technology, Inc. 🇺🇸 |
| Related Domains |  mooersco.com |
| Equipment Class | 802.11 b/g module |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2013-09-23 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2013-05-24 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: U9R-W2SW0001 Grant Date: 10/05/2007 | 2013-04-01 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2013-05-24 | PDF 134.3 KB |
| External Photos | External Photos | 2013-09-23 | PDF 582.5 KB |
| External Photos | External Photos | 2013-04-01 | PDF 100.4 KB |
| Label Information | ID Label/Location Info | 2013-04-01 | PDF 100.8 KB |
| Test Setup Photos | Test Setup Photos | 2013-09-23 | PDF 186.2 KB |
| Test Setup Photos | Test Setup Photos | 2013-05-24 | PDF 180.8 KB |
| Test Report | Test Report | 2013-09-23 | PDF 123.2 KB |
| Test Report | Test Report | 2013-05-24 | PDF 116.8 KB |
| Agency Agreement | Cover Letter(s) | 2013-09-23 | PDF 1.1 MB |
| FCC Cover Letter | Cover Letter(s) | 2013-09-23 | PDF 88.5 KB |
| Agency Agreement | Cover Letter(s) | 2013-05-24 | PDF 38.1 KB |
| FCC Cover Letter | Cover Letter(s) | 2013-05-24 | PDF 18.4 KB |
| Agency Agreement | Cover Letter(s) | 2013-04-01 | PDF 38.1 KB |
| Change in ID Authorization | Cover Letter(s) | 2013-04-01 | PDF 37.9 KB |
| Change in ID Request | Cover Letter(s) | 2013-04-01 | PDF 34.1 KB |
| RF Exposure | RF Exposure Info | 2013-09-23 | PDF 46 KB |
| RF Exposure | RF Exposure Info | 2013-05-24 | PDF 45.5 KB |
Application Information
| Application ID | TT2I107blMu8zDVDL9ikiA== |
|---|---|
| Final Action Date | 2013-09-23 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0016616674 |
| Model | XMODR1W1 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11 b/g module |
| Responsible Party | Roger Branton, CFO, rbranton@mooersco.com , 941-954-8701 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc. |
| Test Firm | Sam Wismer, Advanced Compliance Solutions, Inc., swismer@acstestlab.com  , 561-961-5585 |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. Class II Change to add new antenna and address co-location with FCC ID: VEYXVMR1 |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| TT2I107blMu8zDVDL9ikiA== | 2013-09-23 | Class II permissive change or modification of presently authorized equipment |
| 2nbNbkYjSPKvy8z4UJj9MQ== | 2013-05-24 | Class II permissive change or modification of presently authorized equipment |
| P9IlSUZzIQAGx70u1hZjkw== | 2013-04-01 | Change in identification of presently authorized equipment. Original FCC ID: U9R-W2SW0001 Grant Date: 10/05/2007 |
Grants
TCB Grant - Application TT2I107blMu8zDVDL9ikiA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 09/23/2013 Application Dated: 09/23/2013 |
| xG Technology, Inc. |
| 240 South Pineapple Avenue |
| Suite 701 |
| Sarasota, FL 34236 |
| Attention: Roger Branton , CFO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VEYXMODR1W1 |
| Name of Grantee: | xG Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03 | |||
| 15C | 2412.0 - 2462.0 | 0.017 |
| Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. Class II Change to add new antenna and address co-location with FCC ID: VEYXVMR1 |
EAS Grant - Application TT2I107blMu8zDVDL9ikiA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
xG Technology, Inc. 240 South Pineapple Avenue Suite 701 Sarasota, FL 34236 United States |
Date of Grant: 09/23/2013 Application Dated: 09/23/2013 |
| Attention: Roger Branton , CFO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VEYXMODR1W1 |
| Name of Grantee: | xG Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03 | |||
| 15C | 2412.0 - 2462.0 | 0.017 |
| Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. Class II Change to add new antenna and address co-location with FCC ID: VEYXVMR1 |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 04/01/2013 Application Dated: 04/01/2013 |
| xG Technology, Inc. |
| 240 South Pineapple Avenue |
| Suite 701 |
| Sarasota, FL 34236 |
| Attention: Roger Branton , CFO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VEYXMODR1W1 |
| Name of Grantee: | xG Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03 | |||
| 15C | 2412.0 - 2462.0 | 0.017 |
| Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. |
EAS Grant - Application P9IlSUZzIQAGx70u1hZjkw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
xG Technology, Inc. 240 South Pineapple Avenue Suite 701 Sarasota, FL 34236 United States |
Date of Grant: 04/01/2013 Application Dated: 04/01/2013 |
| Attention: Roger Branton , CFO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VEYXMODR1W1 |
| Name of Grantee: | xG Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03 | |||
| 15C | 2412.0 - 2462.0 | 0.017 |
| Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 05/24/2013 Application Dated: 05/24/2013 |
| xG Technology, Inc. |
| 240 South Pineapple Avenue |
| Suite 701 |
| Sarasota, FL 34236 |
| Attention: Roger Branton , CFO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VEYXMODR1W1 |
| Name of Grantee: | xG Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03 | |||
| 15C | 2412.0 - 2462.0 | 0.017 |
| Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. Class II Change to add new antenna type and address co-location with FCC ID: VEYXMODR1. |
EAS Grant - Application 2nbNbkYjSPKvy8z4UJj9MQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
xG Technology, Inc. 240 South Pineapple Avenue Suite 701 Sarasota, FL 34236 United States |
Date of Grant: 05/24/2013 Application Dated: 05/24/2013 |
| Attention: Roger Branton , CFO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VEYXMODR1W1 |
| Name of Grantee: | xG Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03 | |||
| 15C | 2412.0 - 2462.0 | 0.017 |
| Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. Class II Change to add new antenna type and address co-location with FCC ID: VEYXMODR1. |
| Mail To: |