FCC ID VJA-RJ1704

Radio Module with 5GHz WiFi

by Rajant Corporation

Grantee Code: VJA   Product Code: RJ1704
Latest application date: 2022-07-12

FCC ID Device Details

FCC IDVJA-RJ1704
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeVJA
Product CodeRJ1704
Applicant BusinessRajant Corporation 🇺🇸
Related Domains rajant.com
Equipment ClassRadio Module with 5GHz WiFi
Test FirmA Test Lab Techno Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2022-07-12
4942.5-4987.5 MHzOriginal Equipment2022-07-12

Exhibits

DocumentTypeAvailableFile
USER MANUALUsers Manual2023-01-04PDF 674.8 KB
21-1063_EUT Internal PhotosInternal Photos2023-01-04PDF 772.4 KB
21-1063_EUT External PhotosExternal Photos2023-01-04PDF 1.8 MB
RJ1704 Label and Label Location-VIZMONET_drwgID Label/Location Info2022-07-12PDF 483.6 KB
DFS_Test Setup PhotographsTest Setup Photos2023-01-04PDF 255.5 KB
Part 90Y 4.9G_Test SetupTest Setup Photos2023-01-04PDF 640.6 KB
Test Setup PhotographsTest Setup Photos2023-01-04PDF 1 MB
Antenna spec_KMA-5250-7-NM (5150-5350MHz)Test Report2022-07-12PDF 882.5 KB
Antenna spec_KMA-5500-6-NM (5.5GHz)Test Report2022-07-12PDF 288.3 KB
Antenna spec_KMA-5800-6-NM (5.8GHz)Test Report2022-07-12PDF 1.2 MB
DFS TEST REPORTTest Report2022-07-12PDF 2 MB
FP4959-22DP-VenU-FP-SeriesTest Report2022-07-12PDF 142.4 KB
Rajant KMA-4800-6 AntennaTest Report2022-07-12PDF 1.1 MB
TEST REPORT 1Test Report2022-07-12PDF 5.7 MB
TEST REPORT 1Test Report2022-07-12PDF 4.6 MB
TEST REPORT 2Test Report2022-07-12PDF 4.5 MB
TEST REPORT 2Test Report2022-07-12PDF 3.7 MB
TEST REPORT 3Test Report2022-07-12PDF 5.6 MB
TEST REPORT 4Test Report2022-07-12PDF 3 MB
TEST REPORT 5Test Report2022-07-12PDF 5 MB
Confidentiality Request LetterCover Letter(s)2022-07-12PDF 594.9 KB
DTS-UNII_Declaration_letterCover Letter(s)2022-07-12PDF 399.4 KB
Modular Approval ChecklistCover Letter(s)2022-07-12PDF 888.5 KB
POACover Letter(s)2022-07-12PDF 515.3 KB
2206FS20_IEEE C95.1_21-1063RF Exposure Info2022-07-12PDF 718.7 KB
BlockDiagram Metadata onlyBlock DiagramPDF 117.7 KB
SCH Metadata onlySchematicsPDF 245.7 KB
OP Metadata onlyOperational DescriptionPDF 600.3 KB
Software Security Declaration Metadata onlySDR Software/Security InfPDF 668.9 KB
EBOM Metadata onlyParts List/Tune Up InfoPDF 134.9 KB

Application Information

Application IDwy0vp1zre8dGGRK/icXLpA==
Final Action Date2022-07-12
Application PurposeOriginal Equipment
Applicant FRN0016765612
ModelRJ1704
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionRadio Module with 5GHz WiFi
Responsible PartyDavid Schena, VP Finance, dschena@rajant.com , 484-595-0233
Test FirmFly LU, A Test Lab Techno Corp., fly@atl-lab.com.tw , 886-3-2710188
TCB Emailbentje.holger@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date01/04/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsOutput power is maximum average conducted. This device has integrated TNB and NII transmitters certified under the same FCC ID. The device supports 2T2R MIMO. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 26cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).

Applications

Application IDDatePurpose
wy0vp1zre8dGGRK/icXLpA==2022-07-12Original Equipment
5P95DzbqlbnPg4//wNxfiw==2022-07-12Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
4942.5-4987.5 MHz0.4490.00931ppm4M55W7D90YMO
4945-4985 MHz0.8130.00906ppm9M59W7D90YMO
4950-4980 MHz0.7930.00742ppm19M5W7D90YMO
5180-5240 MHz0.11515EMO
5260-5320 MHz0.18315EMO, ND
5500-5700 MHz0.20515EMO, ND
5745-5825 MHz0.5715EMO

Grants

TCB Grant - Application wy0vp1zre8dGGRK/icXLpA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 07/12/2022

Application Dated: 07/07/2022
Rajant Corporation
200 Chesterfield Parkway
Malvern, PA 19355-3258
 
Attention: David Schena , VP Finance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VJA-RJ1704
Name of Grantee:  Rajant Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Radio Module with 5GHz WiFi
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15E 5180.0  -  5240.0 0.115  
MO ND 15E 5260.0  -  5320.0 0.183  
MO ND 15E 5500.0  -  5700.0 0.205  
MO 15E 5745.0  -  5825.0 0.57  

Output power is maximum average conducted. This device has integrated TNB and NII transmitters certified under the same FCC ID. The device supports 2T2R MIMO. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 26cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).

MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application wy0vp1zre8dGGRK/icXLpA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Rajant Corporation
200 Chesterfield Parkway
Malvern, PA 19355-3258
United States
  Date of Grant: 07/12/2022

Application Dated: 07/07/2022
 
Attention: David Schena , VP Finance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VJA-RJ1704
Name of Grantee:  Rajant Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Radio Module with 5GHz WiFi
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15E 5180.0  -  5240.0 0.115  
MO ND 15E 5260.0  -  5320.0 0.183  
MO ND 15E 5500.0  -  5700.0 0.205  
MO 15E 5745.0  -  5825.0 0.57  

Output power is maximum average conducted. This device has integrated TNB and NII transmitters certified under the same FCC ID. The device supports 2T2R MIMO. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 26cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 5P95DzbqlbnPg4//wNxfiw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 07/12/2022

Application Dated: 07/07/2022
Rajant Corporation
200 Chesterfield Parkway
Malvern, PA 19355-3258
 
Attention: David Schena , VP Finance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VJA-RJ1704
Name of Grantee:  Rajant Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Radio Module with 5GHz WiFi
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 90Y 4942.5  -  4987.5 0.449 0.00931  PM 4M55W7D
MO 90Y 4945.0  -  4985.0 0.813 0.00906  PM 9M59W7D
MO 90Y 4950.0  -  4980.0 0.793 0.00742  PM 19M5W7D

Output power is maximum average conducted. This device has integrated TNB and NII transmitters certified under the same FCC ID. The device supports 2T2R MIMO. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 26cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end- users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).

MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 5P95DzbqlbnPg4//wNxfiw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Rajant Corporation
200 Chesterfield Parkway
Malvern, PA 19355-3258
United States
  Date of Grant: 07/12/2022

Application Dated: 07/07/2022
 
Attention: David Schena , VP Finance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VJA-RJ1704
Name of Grantee:  Rajant Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Radio Module with 5GHz WiFi
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 90Y 4942.5  -  4987.5 0.449 0.00931  PM 4M55W7D
MO 90Y 4945.0  -  4985.0 0.813 0.00906  PM 9M59W7D
MO 90Y 4950.0  -  4980.0 0.793 0.00742  PM 19M5W7D

Output power is maximum average conducted. This device has integrated TNB and NII transmitters certified under the same FCC ID. The device supports 2T2R MIMO. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 26cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end- users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: