FCC ID VM6WD30
DeviceNet Wireless Units
by Omron Corporation Kusatsu Factory
Grantee Code: VM6 Product Code: WD30
Latest application date: 2010-04-27
FCC ID Device Details
| FCC ID | VM6WD30 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | VM6 |
| Product Code | WD30 |
| Applicant Business | Omron Corporation Kusatsu Factory 🇯🇵 |
| Related Domains |  omron.co.jp  jp.ul.com |
| Equipment Class | DeviceNet Wireless Units |
| Test Firm | UL Japan, Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402.2-2480.2 MHz | Class II permissive change or modification of presently authorized equipment | 2010-04-27 |
| 2402.2-2480.2 MHz | Change in identification of presently authorized equipment. Original FCC ID: RXEWD30B Grant Date: 03/06/2007 | 2007-10-10 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photo | External Photos | 2007-10-10 | PDF 213.8 KB |
| ID Label | ID Label/Location Info | 2007-10-10 | PDF 341.8 KB |
| ID Location | ID Label/Location Info | 2007-10-10 | PDF 102.8 KB |
| Test Setup Photos | Test Setup Photos | 2010-04-27 | PDF 154.5 KB |
| Test Report 1 | Test Report | 2010-04-27 | PDF 365.6 KB |
| Test Report 2 | Test Report | 2010-04-27 | PDF 163.7 KB |
| Class II PC Letter | Cover Letter(s) | 2010-04-27 | PDF 37.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2010-04-27 | PDF 53.1 KB |
| FCC ID Change Letter | Cover Letter(s) | 2007-10-10 | PDF 33.1 KB |
| RF Exposure Info | RF Exposure Info | 2010-04-27 | PDF 118.4 KB |
Application Information
| Application ID | d3VAc2X39B13S8JAUhk+lg== |
|---|---|
| Final Action Date | 2010-04-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0016896102 |
| Model | WD30 |
| Frequency Range | 2402.2-2480.2 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | DeviceNet Wireless Units |
| Responsible Party | Masaki Ouchi, Engineering Support Group, Masaki_ouchi@omron.co.jp , +81-77-565-7132 |
| Agent | Naoki Naoki Naoki, UL Japan Inc, Naoki.Sakamoto@jp.ul.com , 81-596-24-8116 |
| Technical Contact | Takajiro Hatakeda, UL Japan Inc, Takahiro.Hatakeda@jp.ul.com , 81-596-24-8116 |
| Non-Technical Contact | Yoshinobu Asai, UL Japan Inc, Yoshinobu.Asai@jp.ul.com , 81-596-24-8116 |
| Test Firm | Mitsuru Fujimura, UL Japan, Inc, mitsuru.fujimura@jp.ul.com , 81-596-24-8116 |
| TCB Email | Michael.Ferrer@us.ul.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. When used in mobile applications the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| d3VAc2X39B13S8JAUhk+lg== | 2010-04-27 | Class II permissive change or modification of presently authorized equipment |
| RsV86Nx0nUSvVPAQj5ulHQ== | 2007-10-10 | Change in identification of presently authorized equipment. Original FCC ID: RXEWD30B Grant Date: 03/06/2007 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402.2-2480.2 MHz | 0.0061900 | 15C |
Grants
TCB Grant - Application RsV86Nx0nUSvVPAQj5ulHQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Underwriters Laboratories, Inc.-Northbrook 333 Pfingsten Road Northbrook, IL 60062 |
Date of Grant: 10/10/2007 Application Dated: 10/10/2007 |
| Omron Corporation Kusatsu Factory |
| 2-2-1 NISHI-KUSATSU |
| KUSATSU-SHI,SHIGA-KEN, 525-0035 Japan |
| Attention: Masaki Ouchi , Engineering Support Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VM6WD30 |
| Name of Grantee: | Omron Corporation Kusatsu Factory |
| Equipment Class: | Digital Transmission System |
| Notes: | DeviceNet Wireless Unit |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.2 - 2480.2 | 0.00619 |
| Power listed is conducted. When used in mobile applications the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. |
EAS Grant - Application RsV86Nx0nUSvVPAQj5ulHQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Omron Corporation Kusatsu Factory 2-2-1 NISHI-KUSATSU P.O. Box , KUSATSU-SHI,SHIGA-KEN, 525-0035 Japan |
Date of Grant: 10/10/2007 Application Dated: 10/10/2007 |
| Attention: Masaki Ouchi , Engineering Support Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VM6WD30 |
| Name of Grantee: | Omron Corporation Kusatsu Factory |
| Equipment Class: | Digital Transmission System |
| Notes: | DeviceNet Wireless Unit |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.2 - 2480.2 | 0.00619 |
| Power listed is conducted. When used in mobile applications the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Underwriters Laboratories, Inc.-Northbrook 333 Pfingsten Road Northbrook, IL 60062 |
Date of Grant: 04/27/2010 Application Dated: 04/27/2010 |
| Omron Corporation Kusatsu Factory |
| 2-2-1 NISHI-KUSATSU |
| KUSATSU-SHI,SHIGA-KEN, 525-0035 Japan |
| Attention: Masaki Ouchi , Engineering Support Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VM6WD30 |
| Name of Grantee: | Omron Corporation Kusatsu Factory |
| Equipment Class: | Digital Transmission System |
| Notes: | DeviceNet Wireless Units |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.2 - 2480.2 | 0.00619 |
| Power listed is conducted. When used in mobile applications the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. |
EAS Grant - Application d3VAc2X39B13S8JAUhk+lg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Omron Corporation Kusatsu Factory 2-2-1 NISHI-KUSATSU P.O. Box , KUSATSU-SHI,SHIGA-KEN, 525-0035 Japan |
Date of Grant: 04/27/2010 Application Dated: 04/27/2010 |
| Attention: Masaki Ouchi , Engineering Support Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VM6WD30 |
| Name of Grantee: | Omron Corporation Kusatsu Factory |
| Equipment Class: | Digital Transmission System |
| Notes: | DeviceNet Wireless Units |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.2 - 2480.2 | 0.00619 |
| Power listed is conducted. When used in mobile applications the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. |
| Mail To: |