FCC ID VMZR84085

RIDGID 18V Charger Radio

by One World Technologies, Inc.

Grantee Code: VMZ   Product Code: R84085
Latest application date: 2017-10-24

FCC ID Device Details

FCC IDVMZR84085
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeVMZ
Product CodeR84085
Applicant BusinessOne World Technologies, Inc. 🇺🇸
Related Domains ttigroupna.com baluntek.com
Equipment ClassRIDGID 18V Charger Radio
Test FirmShenzhen BALUN Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2017-10-24
2402-2480 MHzOriginal Equipment2017-10-24

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2017-10-24PDF 5.1 MB
Internal PhotosInternal Photos2017-10-24PDF 2.2 MB
External PhotosExternal Photos2017-10-24PDF 1.1 MB
External photoExternal Photos2017-10-24PDF 1.1 MB
ID Label/Location InfoID Label/Location Info2017-10-24PDF 196.3 KB
Test Setup Photos_DTSTest Setup Photos2017-10-24PDF 3.3 MB
Test Report_DSSTest Report2017-10-24PDF 3.7 MB
Test Report_DTSTest Report2017-10-24PDF 1.9 MB
Authorization LetterCover Letter(s)2017-10-24PDF 131.9 KB
confidentialityCover Letter(s)2017-10-24PDF 139.5 KB
RF Exposure InfoRF Exposure Info2017-10-24PDF 199.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 1.1 MB
Schematics Metadata onlySchematicsPDF 1.2 MB
Operation Description Metadata onlyOperational DescriptionPDF 45 KB
Operational Description Metadata onlyOperational DescriptionPDF 45 KB

Application Information

Application IDx1qLbEAZ8t1L/jpb4C3bgg==
Final Action Date2017-10-24
Application PurposeOriginal Equipment
Applicant FRN0016892309
ModelR84085
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionRIDGID 18V Charger Radio
Responsible PartyJohn C Collins, Sr. Manager Regulatory Affairs, john.collins@ttigroupna.com , 864-360-3359
AgentWu Wu Wu, Shenzhen BALUN Technology Co., Ltd., xuewen.wu@baluntek.com , 86-755-66833404
Technical Contactxuewen wu, Shenzhen BALUN Technology Co., Ltd., xuewen.wu@baluntek.com , 86-755-66833404
Non-Technical ContactTiffany Zhang, Shenzhen BALUN Technology Co., Ltd., yanfei.zhang@baluntek.com , 86-755-66850100-8100
Test FirmHanson Lin, Shenzhen BALUN Technology Co., Ltd., Hanson.Lin@baluntek.com , 86-755-66833830
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
x1qLbEAZ8t1L/jpb4C3bgg==2017-10-24Original Equipment
2fRcQeKOmQuH2y1DjRsPww==2017-10-24Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.007000015C
2402-2480 MHz0.004000015C

Grants

TCB Grant - Application x1qLbEAZ8t1L/jpb4C3bgg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 10/24/2017

Application Dated: 10/18/2017
One World Technologies, Inc.
115 Innovation Way
Anderson, SC 29621
 
Attention: John Collins , Sr. Manager Regulatory Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VMZR84085
Name of Grantee:  One World Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: RIDGID 18V Charger Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.004  

Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance.

EAS Grant - Application x1qLbEAZ8t1L/jpb4C3bgg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

One World Technologies, Inc.
115 Innovation Way
Anderson, SC 29621
United States
  Date of Grant: 10/24/2017

Application Dated: 10/18/2017
 
Attention: John Collins , Sr. Manager Regulatory Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VMZR84085
Name of Grantee:  One World Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: RIDGID 18V Charger Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.004  

Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance.



TCB Grant - Application 2fRcQeKOmQuH2y1DjRsPww==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 10/24/2017

Application Dated: 10/18/2017
One World Technologies, Inc.
115 Innovation Way
Anderson, SC 29621
 
Attention: John Collins , Sr. Manager Regulatory Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VMZR84085
Name of Grantee:  One World Technologies, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RIDGID 18V Charger Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.007  

Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 2fRcQeKOmQuH2y1DjRsPww==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

One World Technologies, Inc.
115 Innovation Way
Anderson, SC 29621
United States
  Date of Grant: 10/24/2017

Application Dated: 10/18/2017
 
Attention: John Collins , Sr. Manager Regulatory Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VMZR84085
Name of Grantee:  One World Technologies, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RIDGID 18V Charger Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.007  

Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.



Mail To: