FCC ID VOB-P1001A
Tango Multimode PCI –E Embedded Module
by NVIDIA Corporation
Grantee Code: VOB Product Code: P1001A
Latest application date: 2012-01-13
FCC ID Device Details
| FCC ID | VOB-P1001A |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | VOB |
| Product Code | P1001A |
| Applicant Business | NVIDIA Corporation 🇺🇸 |
| Related Domains |  nvidia.com |
| Equipment Class | Tango Multimode PCI –E Embedded Module |
| Test Firm | Bay Area Compliance Laboratory |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.2-848.8 MHz | Original Equipment | 2012-01-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2012-01-13 | PDF 187.4 KB |
| External Photos | External Photos | 2012-01-13 | PDF 104.1 KB |
| FCC ID Label | ID Label/Location Info | 2012-01-13 | PDF 40.1 KB |
| Test Setup Photos | Test Setup Photos | 2012-01-13 | PDF 270.7 KB |
| Test Report | Test Report | 2012-01-13 | PDF 1.1 MB |
| Confidential Request Letter | Cover Letter(s) | 2012-01-13 | PDF 485.3 KB |
| Modular Approval Request Letter | Cover Letter(s) | 2012-01-13 | PDF 17.9 KB |
| RF Exposure Information | RF Exposure Info | 2012-01-13 | PDF 4.5 MB |
Application Information
| Application ID | RruYSkawvbMFy9UXLv3xww== |
|---|---|
| Final Action Date | 2012-01-13 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0016914889 |
| Model | -P1001A |
| Frequency Range | 824.2-848.8 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | Tango Multimode PCI –E Embedded Module |
| Responsible Party | Charles Jackson, cjackson@nvidia.com , 408-486-2000 |
| Test Firm | John Chan, Bay Area Compliance Laboratory, bacl.regulatory@baclcorp.com  , 408-732-9162 |
| TCB Email | bacl.regulatory@baclcorp.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Power Output listed is Conducted. Limited Modular Approval for use as a module in mobile conditions with respect to 2.1091. Approval is limited to OEM installation only. Antenna gain including cable loss must not exceed 4.8 dBi in Cellular 800 MHz band and 3.32 dBi in PCS 1900MHz band for purposes of 2.1043 and 2.1091. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and may be co-located and operated in conjunction with antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products requires the submission of a Class II permissive change application, where appropriate; and containing data demonstrating compliance for SAR, MPE, spurious emissions, ERP/EIRP, and host/module authentication, or new application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for body values in this filing is 1.03 W/Kg. This device contains 900/1800/2100 MHz and UTRA FDD I modes not operational in U.S. Territories. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| RruYSkawvbMFy9UXLv3xww== | 2012-01-13 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application RruYSkawvbMFy9UXLv3xww==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 01/13/2012 Application Dated: 01/13/2012 |
| NVIDIA Corporation |
| 2701 San Tomas Expressway |
| Santa Clara, CA 95050 |
| Attention: Charles Jackson |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VOB-P1001A |
| Name of Grantee: | NVIDIA Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Tango Multimode PCI �E Embedded Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.849 | 2.5 PM | 250KGXW | |
| 22H | 824.2 - 848.8 | 0.564 | 2.5 PM | 246KG7W | |
| 22H | 826.4 - 846.6 | 0.208 | 2.5 PM | 4M22F9W | |
| 24E | 1850.2 - 1909.8 | 0.929 | 2.5 PM | 246KGXW | |
| 24E | 1850.2 - 1909.8 | 0.448 | 2.5 PM | 249KG7W | |
| 24E | 1852.4 - 1907.6 | 0.176 | 2.5 PM | 4M18F9W |
| Power Output listed is Conducted. Limited Modular Approval for use as a module in mobile conditions with respect to 2.1091. Approval is limited to OEM installation only. Antenna gain including cable loss must not exceed 4.8 dBi in Cellular 800 MHz band and 3.32 dBi in PCS 1900MHz band for purposes of 2.1043 and 2.1091. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and may be co-located and operated in conjunction with antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products requires the submission of a Class II permissive change application, where appropriate; and containing data demonstrating compliance for SAR, MPE, spurious emissions, ERP/EIRP, and host/module authentication, or new application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for body values in this filing is 1.03 W/Kg. This device contains 900/1800/2100 MHz and UTRA FDD I modes not operational in U.S. Territories. |
EAS Grant - Application RruYSkawvbMFy9UXLv3xww==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
NVIDIA Corporation 2701 San Tomas Expressway P.O. Box , Santa Clara, CA 95050 United States |
Date of Grant: 01/13/2012 Application Dated: 01/13/2012 |
| Attention: Charles Jackson |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VOB-P1001A |
| Name of Grantee: | NVIDIA Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Tango Multimode PCI –E Embedded Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.849 | 2.5 PM | 250KGXW | |
| 22H | 824.2 - 848.8 | 0.564 | 2.5 PM | 246KG7W | |
| 22H | 826.4 - 846.6 | 0.208 | 2.5 PM | 4M22F9W | |
| 24E | 1850.2 - 1909.8 | 0.929 | 2.5 PM | 246KGXW | |
| 24E | 1850.2 - 1909.8 | 0.448 | 2.5 PM | 249KG7W | |
| 24E | 1852.4 - 1907.6 | 0.176 | 2.5 PM | 4M18F9W |
| Power Output listed is Conducted. Limited Modular Approval for use as a module in mobile conditions with respect to 2.1091. Approval is limited to OEM installation only. Antenna gain including cable loss must not exceed 4.8 dBi in Cellular 800 MHz band and 3.32 dBi in PCS 1900MHz band for purposes of 2.1043 and 2.1091. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and may be co-located and operated in conjunction with antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products requires the submission of a Class II permissive change application, where appropriate; and containing data demonstrating compliance for SAR, MPE, spurious emissions, ERP/EIRP, and host/module authentication, or new application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for body values in this filing is 1.03 W/Kg. This device contains 900/1800/2100 MHz and UTRA FDD I modes not operational in U.S. Territories. |
| Mail To: |