FCC ID VOI-ANMASPLS-02

Mobile Router

by Autonet Mobile

Grantee Code: VOI   Product Code: ANMASPLS02
Latest application date: 2008-04-15

FCC ID Device Details

FCC IDVOI-ANMASPLS-02
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeVOI
Product CodeANMASPLS02
Applicant BusinessAutonet Mobile 🇺🇸
Related Domains autonetmobile.com metlabs.com
Equipment ClassMobile Router
Test FirmMET Laboratories, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2008-04-15
5725-5825 MHzOriginal Equipment2008-04-15
824.7-848.3 MHzOriginal Equipment2008-04-15

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2008-04-15PDF 348.4 KB
Revised ManualUsers Manual2008-04-15PDF 140.2 KB
Internal PhotosInternal Photos2008-04-15PDF 274.3 KB
Internal photosInternal Photos2008-04-15PDF 274.3 KB
External PhotosExternal Photos2008-04-15PDF 79.5 KB
External photosExternal Photos2008-04-15PDF 79.5 KB
LabelID Label/Location Info2008-04-15PDF 32.9 KB
Label LocationID Label/Location Info2008-04-15PDF 114.4 KB
labelID Label/Location Info2008-04-15PDF 32.9 KB
label locationID Label/Location Info2008-04-15PDF 114.4 KB
Test PhotosTest Setup Photos2008-04-15PDF 175.6 KB
test PhotosTest Setup Photos2008-04-15PDF 175.6 KB
Test ReportTest Report2008-04-15PDF 406.9 KB
Test reportTest Report2008-04-15PDF 70 KB
ConfidentialityCover Letter(s)2008-04-15PDF 120.9 KB
Cover letterCover Letter(s)2008-04-15PDF 72.6 KB
Revised Confidentiality LetterCover Letter(s)2008-04-15PDF 128.6 KB
Revised Confidentiality letterCover Letter(s)2008-04-15PDF 128.6 KB
confidentiality letterCover Letter(s)2008-04-15PDF 120.9 KB
MPE CalculationRF Exposure Info2008-04-15PDF 70 KB

Application Information

Application IDmx2b8C9zjk5nfyEV2Idwpg==
Final Action Date2008-04-15
Application PurposeOriginal Equipment
Applicant FRN0016931552
Model-ANMASPLS-02
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionMobile Router
Responsible PartyDoug Moeller, CTO, dmoeller@autonetmobile.com , 415-223-0316
Technical ContactShawn McMillen, MET Laboratories, Inc., tcbinfo@metlabs.com
Non-Technical ContactJennifer Sanchez, MET Laboratories, Inc., tcbinfo@metlabs.com
Test FirmAsad Bajwa, MET Laboratories, Inc., abajwa@metlabs.com , 510-489-6300
TCB Emailtcbinfo@metlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output is conducted. The antenna(s) under this composite FCC ID must operate in mobile RF exposure conditions to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except for this application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
mx2b8C9zjk5nfyEV2Idwpg==2008-04-15Original Equipment
aFk87xvyoV6FtMVP5LMzFQ==2008-04-15Original Equipment
5/3d42Y9NlhFqKM3sK70lw==2008-04-15Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
824.7-848.3 MHz0.2821ppm1M25F9W22
1851.25-1908.75 MHz0.2511ppm1M25F9W24E
2412-2462 MHz0.196000015C36, CC
5725-5825 MHz0.101000015E36, CC

Grants

TCB Grant - Application mx2b8C9zjk5nfyEV2Idwpg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 04/15/2008

Application Dated: 04/10/2008
Autonet Mobile
1055 W. College #308
Santa Rosa, CA 95401
 
Attention: Doug Moeller , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VOI-ANMASPLS-02
Name of Grantee:  Autonet Mobile
Equipment Class: Digital Transmission System
Notes: Mobile Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15C 2412.0  -  2462.0 0.196  

Power Output is conducted. The antenna(s) under this composite FCC ID must operate in mobile RF exposure conditions to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except for this application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application mx2b8C9zjk5nfyEV2Idwpg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Autonet Mobile
1055 W. College #308 P.O. Box ,
Santa Rosa, CA 95401
United States
  Date of Grant: 04/15/2008

Application Dated: 04/10/2008
 
Attention: Doug Moeller , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VOI-ANMASPLS-02
Name of Grantee:  Autonet Mobile
Equipment Class: Digital Transmission System
Notes: Mobile Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15C 2412.0  -  2462.0 0.196  

Power Output is conducted. The antenna(s) under this composite FCC ID must operate in mobile RF exposure conditions to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except for this application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application aFk87xvyoV6FtMVP5LMzFQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 04/15/2008

Application Dated: 04/10/2008
Autonet Mobile
1055 W. College #308
Santa Rosa, CA 95401
 
Attention: Doug Moeller , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VOI-ANMASPLS-02
Name of Grantee:  Autonet Mobile
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mobile Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15E 5725.0  -  5825.0 0.101  

Power Output is conducted. The antenna(s) under this composite FCC ID must operate in mobile RF exposure conditions to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except for this application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application aFk87xvyoV6FtMVP5LMzFQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Autonet Mobile
1055 W. College #308 P.O. Box ,
Santa Rosa, CA 95401
United States
  Date of Grant: 04/15/2008

Application Dated: 04/10/2008
 
Attention: Doug Moeller , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VOI-ANMASPLS-02
Name of Grantee:  Autonet Mobile
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mobile Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15E 5725.0  -  5825.0 0.101  

Power Output is conducted. The antenna(s) under this composite FCC ID must operate in mobile RF exposure conditions to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except for this application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 5/3d42Y9NlhFqKM3sK70lw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 04/15/2008

Application Dated: 04/10/2008
Autonet Mobile
1055 W. College #308
Santa Rosa, CA 95401
 
Attention: Doug Moeller , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VOI-ANMASPLS-02
Name of Grantee:  Autonet Mobile
Equipment Class: PCS Licensed Transmitter
Notes: Mobile Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1851.25  -  1908.75 0.251 1.0  PM 1M25F9W
22 824.7  -  848.3 0.282 1.0  PM 1M25F9W

Power Output is ERP for Part 22 and EIRP for Part 24. Part 22 / 24 antenna(3dBi) under this composite FCC ID must operate in mobile RF exposure conditions to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except for this application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 5/3d42Y9NlhFqKM3sK70lw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Autonet Mobile
1055 W. College #308 P.O. Box ,
Santa Rosa, CA 95401
United States
  Date of Grant: 04/15/2008

Application Dated: 04/10/2008
 
Attention: Doug Moeller , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VOI-ANMASPLS-02
Name of Grantee:  Autonet Mobile
Equipment Class: PCS Licensed Transmitter
Notes: Mobile Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1851.25  -  1908.75 0.251 1.0  PM 1M25F9W
22 824.7  -  848.3 0.282 1.0  PM 1M25F9W

Power Output is ERP for Part 22 and EIRP for Part 24. Part 22 / 24 antenna(3dBi) under this composite FCC ID must operate in mobile RF exposure conditions to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except for this application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: