FCC ID VPYLB1CQ
Communication Module
by Murata Manufacturing Co., Ltd.
Grantee Code: VPY Product Code: LB1CQ
Latest application date: 2019-02-03
FCC ID Device Details
| FCC ID | VPYLB1CQ |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | VPY |
| Product Code | LB1CQ |
| Applicant Business | Murata Manufacturing Co., Ltd. 🇯🇵 |
| Related Domains |  murata.com |
| Equipment Class | Communication Module |
| Test Firm | UL Verification Services (Guangzhou) Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2019-02-03 |
| 2402-2480 MHz | Original Equipment | 2019-02-03 |
| 5180-5240 MHz | Original Equipment | 2019-02-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2019-08-02 | PDF 449.4 KB |
| user_manual_FCC Metadata only | Users Manual | 2019-08-02 | PDF 201.4 KB |
| Internal_Photo | Internal Photos | 2019-08-02 | PDF 513.5 KB |
| External_Photo | External Photos | 2019-08-02 | PDF 513.4 KB |
| label_and_label_location | ID Label/Location Info | 2019-02-03 | PDF 213 KB |
| Setup_Photo | Test Setup Photos | 2019-08-02 | PDF 576.6 KB |
| BLE_Report | Test Report | 2019-02-03 | PDF 4.6 MB |
| BT_Report_1 | Test Report | 2019-02-03 | PDF 4.4 MB |
| BT_Report_2 | Test Report | 2019-02-03 | PDF 4.1 MB |
| RLAN_Report_1 | Test Report | 2019-02-03 | PDF 4.9 MB |
| RLAN_Report_2 | Test Report | 2019-02-03 | PDF 5.1 MB |
| RLAN_Report_3 | Test Report | 2019-02-03 | PDF 3.1 MB |
| RLAN_Report_4 | Test Report | 2019-02-03 | PDF 3.1 MB |
| RLAN_Report_5 | Test Report | 2019-02-03 | PDF 2.9 MB |
| WLAN Report _1 | Test Report | 2019-02-03 | PDF 4.2 MB |
| WLAN Report _2 | Test Report | 2019-02-03 | PDF 3.6 MB |
| WLAN Report _3 | Test Report | 2019-02-03 | PDF 3.2 MB |
| WLAN Report _5 | Test Report | 2019-02-03 | PDF 2.7 MB |
| WLAN Report_ 4 | Test Report | 2019-02-03 | PDF 5 MB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2019-02-03 | PDF 331.3 KB |
| Authorization_Letter | Cover Letter(s) | 2019-02-03 | PDF 169 KB |
| FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2019-02-03 | PDF 479.6 KB |
| FCC Software Configuration Control Declaration Rev1.1 | Cover Letter(s) | 2019-02-03 | PDF 87.5 KB |
| FCC_Special_Power_of_Attorney | Cover Letter(s) | 2019-02-03 | PDF 32.9 KB |
| Letter_for_Module_Declaration | Cover Letter(s) | 2019-02-03 | PDF 255.9 KB |
| FCC MPE Report | RF Exposure Info | 2019-02-03 | PDF 280.5 KB |
| Block_Diagram Metadata only | Block Diagram | PDF 143.9 KB | |
| schematics Metadata only | Schematics | PDF 132.8 KB | |
| operation_sedciption Metadata only | Operational Description | PDF 620.2 KB | |
| SOFTWARE_SECURITY_DESCRIPTION Metadata only | SDR Software/Security Inf | PDF 245.6 KB |
Application Information
| Application ID | HLF5cTVPupHcL/1e5tvdXg== |
|---|---|
| Final Action Date | 2019-02-03 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0017033432 |
| Model | LB1CQ |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Communication Module |
| Responsible Party | MOTOO HAYASHI, GENERAL MANAGER, mhayashi@murata.com , 81-75-955-6736 |
| Technical Contact | Murata Manufacturing Co., Ltd., mhayashi@murata.com |
| Test Firm | Stephen Guo, UL Verification Services (Guangzhou) Co., Ltd., Stephen.guo@ul.com  , +86 0769 33817120 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 07/31/2019 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Single Modular Approval Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. Device contains 20 and 40 MHz signal bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module.The end user manual shall include all required regulatory information/warming as shown in User manual. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be collocated or operating in conjunction with antenna or transmitter. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: VPYLB1CQ or Contains FCC ID: VPYLB1CQ when the module is installed inside another device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| HLF5cTVPupHcL/1e5tvdXg== | 2019-02-03 | Original Equipment |
| 1uDyOdTtjKWeDiTcPciTkQ== | 2019-02-03 | Original Equipment |
| +rBQKVQuqFquZe1f7jr3sA== | 2019-02-03 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application HLF5cTVPupHcL/1e5tvdXg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 02/03/2019 Application Dated: 02/03/2019 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1CQ |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00133 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.3155 |
| Limited Single Modular Approval Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. Device contains 20 and 40 MHz signal bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module.The end user manual shall include all required regulatory information/warming as shown in User manual. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be collocated or operating in conjunction with antenna or transmitter. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: VPYLB1CQ or Contains FCC ID: VPYLB1CQ when the module is installed inside another device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application HLF5cTVPupHcL/1e5tvdXg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 02/03/2019 Application Dated: 02/03/2019 |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1CQ |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00133 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.3155 |
| Limited Single Modular Approval Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. Device contains 20 and 40 MHz signal bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module.The end user manual shall include all required regulatory information/warming as shown in User manual. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be collocated or operating in conjunction with antenna or transmitter. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: VPYLB1CQ or Contains FCC ID: VPYLB1CQ when the module is installed inside another device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 02/03/2019 Application Dated: 02/03/2019 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1CQ |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00745 |
| Limited Single Modular Approval Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module.The end user manual shall include all required regulatory information/warming as shown in User manual. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be collocated or operating in conjunction with antenna or transmitter. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: VPYLB1CQ or Contains FCC ID: VPYLB1CQ when the module is installed inside another device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 1uDyOdTtjKWeDiTcPciTkQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 02/03/2019 Application Dated: 02/03/2019 |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1CQ |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00745 |
| Limited Single Modular Approval Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module.The end user manual shall include all required regulatory information/warming as shown in User manual. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be collocated or operating in conjunction with antenna or transmitter. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: VPYLB1CQ or Contains FCC ID: VPYLB1CQ when the module is installed inside another device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 02/03/2019 Application Dated: 02/03/2019 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1CQ |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.052 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.05649 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.05284 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.05358 |
| Limited Single Modular Approval Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. Device contains 20 and 40,80 MHz signal bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warming as shown in User manual. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be collocated or operating in conjunction with antenna or transmitter. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: VPYLB1CQ or Contains FCC ID: VPYLB1CQ when the module is installed inside another device. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application +rBQKVQuqFquZe1f7jr3sA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 02/03/2019 Application Dated: 02/03/2019 |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1CQ |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.052 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.05649 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.05284 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.05358 |
| Limited Single Modular Approval Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. Device contains 20 and 40,80 MHz signal bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warming as shown in User manual. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be collocated or operating in conjunction with antenna or transmitter. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: VPYLB1CQ or Contains FCC ID: VPYLB1CQ when the module is installed inside another device. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |