FCC ID VPYLB1DM
Communication Module
by Murata Manufacturing Co., Ltd.
Grantee Code: VPY Product Code: LB1DM
Latest application date: 2015-04-06
FCC ID Device Details
| FCC ID | VPYLB1DM |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | VPY |
| Product Code | LB1DM |
| Applicant Business | Murata Manufacturing Co., Ltd. 🇯🇵 |
| Related Domains |  murata.com |
| Equipment Class | Communication Module |
| Test Firm | HCT Co., LTD |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2015-04-06 |
| 2402-2480 MHz | Original Equipment | 2015-04-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2015-09-30 | PDF 340.6 KB |
| Internal Photos | Internal Photos | 2015-09-30 | PDF 263.5 KB |
| External Photos | External Photos | 2015-09-30 | PDF 331.5 KB |
| ID Label and Location Info | ID Label/Location Info | 2015-04-06 | PDF 30.7 KB |
| Test Setup Photos | Test Setup Photos | 2015-09-30 | PDF 875.2 KB |
| Test Report | Test Report | 2015-04-06 | PDF 2.6 MB |
| Test Report | Test Report | 2015-04-06 | PDF 3.6 MB |
| Confidential Request Letter | Cover Letter(s) | 2015-04-06 | PDF 235.7 KB |
| Modular Declaration Letter | Cover Letter(s) | 2015-04-06 | PDF 837.7 KB |
| RF Exposure Info | RF Exposure Info | 2015-04-06 | PDF 129 KB |
| Block Diagram Metadata only | Block Diagram | PDF 115 KB | |
| Schematics Metadata only | Schematics | PDF 53.9 KB | |
| Operational Description Metadata only | Operational Description | PDF 340.6 KB | |
| Part List Metadata only | Parts List/Tune Up Info | PDF 84.6 KB |
Application Information
| Application ID | niHG8WTIQMmmjA28ObSAAQ== |
|---|---|
| Final Action Date | 2015-04-06 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0017033432 |
| Model | LB1DM |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Communication Module |
| Responsible Party | MOTOO HAYASHI, GENERAL MANAGER, mhayashi@murata.com , 81-75-955-6736 |
| Test Firm | Sang Lee, HCT Co., LTD, sjlee@HCT.co.kr  , 82-31-645-6420 |
| TCB Email | tcb@hctamerica.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 09/30/2015 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Single Modular approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device operates with 20MHz channel bandwidth capabilities. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| niHG8WTIQMmmjA28ObSAAQ== | 2015-04-06 | Original Equipment |
| 4l9e2ZxlDsxyxZYFDYuhmA== | 2015-04-06 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application niHG8WTIQMmmjA28ObSAAQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131 |
Date of Grant: 04/06/2015 Application Dated: 04/03/2015 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DM |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2203 |
| Limited Single Modular approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device operates with 20MHz channel bandwidth capabilities. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application niHG8WTIQMmmjA28ObSAAQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 04/06/2015 Application Dated: 04/03/2015 |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DM |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2203 |
| Limited Single Modular approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device operates with 20MHz channel bandwidth capabilities. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131 |
Date of Grant: 04/06/2015 Application Dated: 04/03/2015 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DM |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00792 |
| Limited Single Modular approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 4l9e2ZxlDsxyxZYFDYuhmA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 04/06/2015 Application Dated: 04/03/2015 |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DM |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00792 |
| Limited Single Modular approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |