FCC ID VPYLB1DR
Communication Module
by Murata Manufacturing Co., Ltd.
Grantee Code: VPY Product Code: LB1DR
Latest application date: 2019-06-12
FCC ID Device Details
| FCC ID | VPYLB1DR |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | VPY |
| Product Code | LB1DR |
| Applicant Business | Murata Manufacturing Co., Ltd. 🇯🇵 |
| Related Domains |  murata.com |
| Equipment Class | Communication Module |
| Test Firm | Sony GMOC EMC/RF Test Laboratory, Main Lab |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-06-12 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2019-06-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-01-29 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2017-07-31 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-02-01 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2015-12-24 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2015-12-09 |
| 2402-2480 MHz | Original Equipment | 2015-04-10 |
| 5180-5320 MHz | Original Equipment | 2015-04-10 |
| 2402-2480 MHz | Original Equipment | 2015-04-10 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| (Short term Confidential) Users Manual_FCC | Users Manual | 2015-10-07 | PDF 175.8 KB |
| Users manual | Users Manual | 2015-10-07 | PDF 175.8 KB |
| (Short-Term Confidential) Internal Photo | Internal Photos | 2015-10-07 | PDF 381.2 KB |
| Internal photos | Internal Photos | 2015-10-07 | PDF 381.2 KB |
| 04 Short-Term Confidential_External Photo | External Photos | 2019-07-16 | PDF 786 KB |
| 04 Short-Term Confidential_External Photo | External Photos | 2019-03-27 | PDF 526.4 KB |
| (Short-Term Confidential) External Photo | External Photos | 2015-10-07 | PDF 397.7 KB |
| (Short-Term Confidential) External Photo_with antenna | External Photos | 2015-10-07 | PDF 207.5 KB |
| External photos | External Photos | 2015-10-07 | PDF 397.7 KB |
| External photos(Antenna) | External Photos | 2015-10-07 | PDF 207.5 KB |
| ID Label & location | ID Label/Location Info | 2015-04-10 | PDF 233.8 KB |
| Label and Location to FCC | ID Label/Location Info | 2015-04-10 | PDF 233.8 KB |
| 03 Short-Term Confidential_FCC SAR Setup Photo_JB-Z0528-B | Test Setup Photos | 2019-07-16 | PDF 2.1 MB |
| 03 Short-Term Confidential_FCC SAR Setup Photo_JB-Z0479-A | Test Setup Photos | 2019-03-27 | PDF 609.5 KB |
| 03 (Short-Term Confidential) FCC SAR Setup Photo_JB-Z0321-A | Test Setup Photos | 2017-09-04 | PDF 528.9 KB |
| (Short-Term Confidential) FCC SAR Test Setup Photo_JB-Z0108_1DR003 | Test Setup Photos | 2016-06-22 | PDF 568.3 KB |
| (Short-Term Confidential)FCC SAR Test Setup Photo_JB-Z0115_1DR004 | Test Setup Photos | 2016-06-21 | PDF 394.9 KB |
| (Short-Term Confidential) FCC SAR Setup Photo_1DR001_JB-Z0102 | Test Setup Photos | 2016-01-08 | PDF 564.8 KB |
| (Short-Term Confidential) FCC SAR Setup Photo_1DR002_JB-Z0094-A | Test Setup Photos | 2016-01-08 | PDF 437.2 KB |
| (Short term Confidential)FCC Test Set up Photo_DSS | Test Setup Photos | 2015-10-07 | PDF 400.1 KB |
| (Short term Confidential)FCC Test Setup Photo_DTS | Test Setup Photos | 2015-10-07 | PDF 874.2 KB |
| Test setup photos(DFS) | Test Setup Photos | 2015-10-07 | PDF 120.9 KB |
| Test setup photos(NII) | Test Setup Photos | 2015-10-07 | PDF 770.5 KB |
| 03 FCC SAR Report_JB-Z0321-A | Test Report | 2017-07-31 | PDF 3.3 MB |
| FCC SAR Test Report_JB-Z0115_1DR004 | RF Exposure Info | 2016-02-01 | PDF 2.7 MB |
| FCC SAR Test Report_JB-Z0108_1DR003 | RF Exposure Info | 2015-12-24 | PDF 2.4 MB |
| FCC Test Report_DSS_Part1 | Test Report | 2015-04-10 | PDF 1.7 MB |
| FCC Test Report_DSS_Part2 | Test Report | 2015-04-10 | PDF 2.4 MB |
| FCC Test Report_DTS | Test Report | 2015-04-10 | PDF 2.6 MB |
| Test report(DFS) | Test Report | 2015-04-10 | PDF 682.8 KB |
| Test report(NII) | Test Report | 2015-04-10 | PDF 4.5 MB |
| 02 FCC Authorization Letter | Cover Letter(s) | 2019-06-12 | PDF 32.6 KB |
| 02 FCC Class II Permissive Change Letter | Cover Letter(s) | 2019-06-12 | PDF 65.7 KB |
| 02 FCC Request for Confidentiality Letter | Cover Letter(s) | 2019-06-12 | PDF 26.1 KB |
| 02 FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2019-06-12 | PDF 28.6 KB |
| 02 FCC Special Power of Attorney | Cover Letter(s) | 2019-06-12 | PDF 32.9 KB |
| 02 FCC Authorization Letter | Cover Letter(s) | 2019-01-29 | PDF 31.5 KB |
| 02 FCC Class II Permissive Change Letter | Cover Letter(s) | 2019-01-29 | PDF 64.2 KB |
| 02 FCC Request for Confidentiality Letter | Cover Letter(s) | 2019-01-29 | PDF 25.8 KB |
| 02 FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2019-01-29 | PDF 28.4 KB |
| 02 FCC Authorization Letter | Cover Letter(s) | 2017-07-31 | PDF 32.7 KB |
| 02 FCC Class II Permissive Change Letter | Cover Letter(s) | 2017-07-31 | PDF 51.6 KB |
| 02 FCC Request for Confidentiality Letter | Cover Letter(s) | 2017-07-31 | PDF 27.5 KB |
| 02 FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2017-07-31 | PDF 28.3 KB |
| 02 FCC Special Power of Attorney | Cover Letter(s) | 2017-07-31 | PDF 260.4 KB |
| FCC Authorization Letter | Cover Letter(s) | 2016-02-01 | PDF 35.3 KB |
| FCC Class II Permissive Change Letter | Cover Letter(s) | 2016-02-01 | PDF 52.8 KB |
| FCC LMA Letter | Cover Letter(s) | 2016-02-01 | PDF 84.3 KB |
| FCC Request for Confidentiality Letter | Cover Letter(s) | 2016-02-01 | PDF 29 KB |
| FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2016-02-01 | PDF 30.9 KB |
| FCC Special Power of Attorney | Cover Letter(s) | 2016-02-01 | PDF 259.5 KB |
| FCC Authorization Letter | Cover Letter(s) | 2015-12-24 | PDF 33.9 KB |
| FCC Class II Permissive Change Letter | Cover Letter(s) | 2015-12-24 | PDF 50.8 KB |
| FCC LMA Letter | Cover Letter(s) | 2015-12-24 | PDF 81.2 KB |
| FCC Request for Confidentiality Letter | Cover Letter(s) | 2015-12-24 | PDF 27.6 KB |
| FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2015-12-24 | PDF 29.8 KB |
| FCC Authorization Letter | Cover Letter(s) | 2015-12-09 | PDF 33.7 KB |
| FCC Class II Permissive Change Letter | Cover Letter(s) | 2015-12-09 | PDF 52.2 KB |
| FCC LMA Letter | Cover Letter(s) | 2015-12-09 | PDF 85.6 KB |
| FCC Request for Confidentiality Letter | Cover Letter(s) | 2015-12-09 | PDF 27.2 KB |
| FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2015-12-09 | PDF 28.1 KB |
| Authorization letter | Cover Letter(s) | 2015-04-10 | PDF 286.8 KB |
| Confidentiality letter | Cover Letter(s) | 2015-04-10 | PDF 255.5 KB |
| Declaration letter for new rule | Cover Letter(s) | 2015-04-10 | PDF 238.8 KB |
| FCC Authorization Letter | Cover Letter(s) | 2015-04-10 | PDF 286.8 KB |
| FCC Authorization Letter.pdf | Cover Letter(s) | 2015-04-10 | PDF 286.8 KB |
| FCC Declaration Letter_Old rule or New rule | Cover Letter(s) | 2015-04-10 | PDF 238.8 KB |
| FCC Declaration of Professional Installation | Cover Letter(s) | 2015-04-10 | PDF 245.7 KB |
| FCC LMA Letter | Cover Letter(s) | 2015-04-10 | PDF 533.6 KB |
| FCC Request for Confidentiality Letter | Cover Letter(s) | 2015-04-10 | PDF 255.5 KB |
| FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2015-04-10 | PDF 265.2 KB |
| LMA letter | Cover Letter(s) | 2015-04-10 | PDF 533.6 KB |
| Professional installation letter | Cover Letter(s) | 2015-04-10 | PDF 245.7 KB |
| Short term confidentiality letter | Cover Letter(s) | 2015-04-10 | PDF 265.2 KB |
| 03 FCC SAR Report -1_JB-Z0528-B | RF Exposure Info | 2019-06-12 | PDF 1.2 MB |
| 03 FCC SAR Report -2_JB-Z0528-B | RF Exposure Info | 2019-06-12 | PDF 5.5 MB |
| 03 FCC SAR Report_JB-Z0479-A | RF Exposure Info | 2019-01-29 | PDF 3.3 MB |
| FCC SAR Report_1DR001_JB-Z0102 | RF Exposure Info | 2015-12-09 | PDF 2.4 MB |
| FCC SAR Report_1DR002_JB-Z0094-A | RF Exposure Info | 2015-12-09 | PDF 3.8 MB |
| RF EX(Co-location) | RF Exposure Info | 2015-04-10 | PDF 64.6 KB |
| RF EX(NII) | RF Exposure Info | 2015-04-10 | PDF 54.6 KB |
| RF Exposure sheet_Co-location | RF Exposure Info | 2015-04-10 | PDF 64.6 KB |
| RF Exposure sheet_DSS | RF Exposure Info | 2015-04-10 | PDF 54.7 KB |
| RF Exposure sheet_DTS | RF Exposure Info | 2015-04-10 | PDF 54.6 KB |
| (Confidential) Block Diagram Metadata only | Block Diagram | PDF 145.1 KB | |
| Block diagram Metadata only | Block Diagram | PDF 145.1 KB | |
| (Confidential) Schematics Metadata only | Schematics | PDF 755.2 KB | |
| Schematics Metadata only | Schematics | PDF 755.2 KB | |
| (Confidential) Theory of Operation-Antenna List Metadata only | Operational Description | PDF 8.9 KB | |
| (Confidential) Theory of Operation-Antenna Specification Metadata only | Operational Description | PDF 504.6 KB | |
| (Confidential) Theory of Operation-BT QDID Metadata only | Operational Description | PDF 169.8 KB | |
| (Confidential) Theory of Operation-Hopping Metadata only | Operational Description | PDF 130 KB | |
| (Confidential) Theory of Operation-Host specification Metadata only | Operational Description | PDF 161 KB | |
| (Confidential) Theory of Operation-Host specification Metadata only | Operational Description | PDF 375.3 KB | |
| (Confidential) Theory of Operation-Host specification Metadata only | Operational Description | PDF 1.2 MB | |
| (Confidential) Theory of Operation-Interface Specification_FCC Metadata only | Operational Description | PDF 505.2 KB | |
| (Confidential) Theory of Operation-Specification Metadata only | Operational Description | PDF 187.2 KB | |
| 04 (Confidential) Theory of Operation-Antenna List Metadata only | Operational Description | PDF 18.2 KB | |
| 04 (Confidential) Theory of Operation-Antenna Specification Metadata only | Operational Description | PDF 382.6 KB | |
| 04 (Confidential) Theory of Operation-Host Specification Metadata only | Operational Description | PDF 573.3 KB | |
| 04(Confidential) Theory of Operation-Host specification Metadata only | Operational Description | PDF 330.9 KB | |
| 05 Confidential_Theory of Operation-Antenna List Metadata only | Operational Description | PDF 54.1 KB | |
| 05 Confidential_Theory of Operation-Antenna List Metadata only | Operational Description | PDF 54.2 KB | |
| 05 Confidential_Theory of Operation-Antenna Specification Metadata only | Operational Description | PDF 631.9 KB | |
| 05 Confidential_Theory of Operation-Antenna Specification Metadata only | Operational Description | PDF 812.4 KB | |
| 05 Confidential_Theory of Operation-Host Specification Metadata only | Operational Description | PDF 1 MB | |
| 05 Confidential_Theory of Operation-Host Specification Metadata only | Operational Description | PDF 400.8 KB | |
| 05 Confidential_Theory of Operation-Host Specification_Reference-guide Metadata only | Operational Description | PDF 111.1 KB | |
| Operational description(Antenna list) Metadata only | Operational Description | PDF 8.9 KB | |
| Operational description(Antenna spec) Metadata only | Operational Description | PDF 504.6 KB | |
| Operational description(Interface) Metadata only | Operational Description | PDF 505.2 KB | |
| Operational description(Security) Metadata only | Operational Description | PDF 82.1 KB | |
| Operational description(Spec) Metadata only | Operational Description | PDF 187.2 KB | |
| (Confidential) Parts List Metadata only | Parts List/Tune Up Info | PDF 156.2 KB | |
| Parts list Metadata only | Parts List/Tune Up Info | PDF 156.2 KB |
Application Information
| Application ID | 8nEdDCukQ3nuRlJAisW5KA== |
|---|---|
| Final Action Date | 2019-06-12 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0017033432 |
| Model | LB1DR |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Communication Module |
| Responsible Party | MOTOO HAYASHI, GENERAL MANAGER, mhayashi@murata.com , 81-75-955-6736 |
| Agent | Yukari Yukari Yukari, UL Japan, Inc., Yukari.Ito@ul.com  , 81-596-24-8999 |
| Technical Contact | Teruki Kurihara, Sony Global Manufacturing & Operations Corporation, Teruki.Kurihara@sony.com  , 81-438-37-2750 |
| Test Firm | Koichi Hiyaoka, Sony GMOC EMC/RF Test Laboratory, Main Lab, Koichi.Hiyaoka@sony.com , 81-438-37-2750 |
| TCB Email | emc.jp@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 07/16/2019 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add specific portable configuration host described in the filing(Limited to the Wireless LAN(2.4 GHz band:Low Power Mode, 5 GHz band:High Power Mode) and Bluetooth Low Energy). Limited Modular approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : Digital Camera 1DR026). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The highest reported SAR for Body-worn and Simultaneous transmission exposure conditions are 0.29 W/kg and 0.41 W/kg, respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 8nEdDCukQ3nuRlJAisW5KA== | 2019-06-12 | Class II permissive change or modification of presently authorized equipment |
| 4oBkja8JcSt4sMJIPPWrsQ== | 2019-06-12 | Class II permissive change or modification of presently authorized equipment |
| tFNP+xEcQunqma4XdAET1w== | 2019-01-29 | Class II permissive change or modification of presently authorized equipment |
| V7D6ayq+JN5ek31MEsoxOw== | 2017-07-31 | Class II permissive change or modification of presently authorized equipment |
| b9CcG4/9tl/7w8RjoQvtSA== | 2016-02-01 | Class II permissive change or modification of presently authorized equipment |
| /6W1qIDmJYJe2yp1IvDR6Q== | 2015-12-24 | Class II permissive change or modification of presently authorized equipment |
| WoRX8yRDuYL1tHxMEiAXPg== | 2015-12-09 | Class II permissive change or modification of presently authorized equipment |
| kOkqeEKrlfzBMNfwwQhMOA== | 2015-04-10 | Original Equipment |
| 2ar6DPf8Y9VOhjooN3Ijhw== | 2015-04-10 | Original Equipment |
| 1+WnqQHJm/EsrPtrxeIbJQ== | 2015-04-10 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application WoRX8yRDuYL1tHxMEiAXPg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 12/09/2015 Application Dated: 12/08/2015 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.3581 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0078 |
| Class II Permissive Change to add specific portable configuration host described in the filing(Limited to the Wireless LAN(2.4GHz band) and Bluetooth Low Energy). Limited Modular approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : Digital Accessory 1DR001 and Digital Camera 1DR002). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The highest reported SAR values for head and body-worn are 1.17 W/kg and 1.08 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application WoRX8yRDuYL1tHxMEiAXPg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 12/09/2015 Application Dated: 12/08/2015 |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.3581 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0078 |
| Class II Permissive Change to add specific portable configuration host described in the filing(Limited to the Wireless LAN(2.4GHz band) and Bluetooth Low Energy). Limited Modular approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : Digital Accessory 1DR001 and Digital Camera 1DR002). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The highest reported SAR values for head and body-worn are 1.17 W/kg and 1.08 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 07/31/2017 Application Dated: 07/31/2017 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.3581 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0078 |
| Class II Permissive Change to add specific portable configuration host described in the filing(Limited to the Wireless LAN(2.4GHz band) and Bluetooth Low Energy). Limited Modular approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : Digital Camera 1DR011). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The highest reported SAR value is 0.95 W/kg : Body-worn. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application V7D6ayq+JN5ek31MEsoxOw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 07/31/2017 Application Dated: 07/31/2017 |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.3581 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0078 |
| Class II Permissive Change to add specific portable configuration host described in the filing(Limited to the Wireless LAN(2.4GHz band) and Bluetooth Low Energy). Limited Modular approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : Digital Camera 1DR011). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The highest reported SAR value is 0.95 W/kg : Body-worn. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 01/29/2019 Application Dated: 01/29/2019 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.3581 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0078 |
| Class II Permissive Change to add specific portable configuration host described in the filing(Limited to the Wireless LAN(2.4GHz band, High Power Mode) and Bluetooth Low Energy). Limited Modular approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : Digital Camera 1DR024). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The highest reported SAR value is 0.99 W/kg : Body-worn. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application tFNP+xEcQunqma4XdAET1w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 01/29/2019 Application Dated: 01/29/2019 |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.3581 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0078 |
| Class II Permissive Change to add specific portable configuration host described in the filing(Limited to the Wireless LAN(2.4GHz band, High Power Mode) and Bluetooth Low Energy). Limited Modular approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : Digital Camera 1DR024). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The highest reported SAR value is 0.99 W/kg : Body-worn. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 04/10/2015 Application Dated: 04/10/2015 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0083 |
| Limited Modular approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Special test jig board is used for the evaluation. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application kOkqeEKrlfzBMNfwwQhMOA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 04/10/2015 Application Dated: 04/10/2015 |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0083 |
| Limited Modular approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Special test jig board is used for the evaluation. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 02/01/2016 Application Dated: 02/01/2016 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.3581 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0078 |
| Class II Permissive Change to add specific portable configuration host described in the filing(Limited to the Wireless LAN(2.4GHz band) and Bluetooth Low Energy). Limited Modular approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : Digital Camera 1DR004). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The highest reported SAR values for head, body-worn and extremity(hand) are 1.17 W/kg, 1.08 W/kg, and 0.74 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application b9CcG4/9tl/7w8RjoQvtSA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 02/01/2016 Application Dated: 02/01/2016 |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.3581 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0078 |
| Class II Permissive Change to add specific portable configuration host described in the filing(Limited to the Wireless LAN(2.4GHz band) and Bluetooth Low Energy). Limited Modular approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : Digital Camera 1DR004). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The highest reported SAR values for head, body-worn and extremity(hand) are 1.17 W/kg, 1.08 W/kg, and 0.74 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 06/12/2019 Application Dated: 06/12/2019 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0659 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0078 |
| Class II Permissive Change to add specific portable configuration host described in the filing(Limited to the Wireless LAN(2.4 GHz band:Low Power Mode, 5 GHz band:High Power Mode) and Bluetooth Low Energy). Limited Modular approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : Digital Camera 1DR026). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.
The highest reported SAR for Body-worn and Simultaneous transmission exposure conditions are 0.29 W/kg and 0.41 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 8nEdDCukQ3nuRlJAisW5KA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 06/12/2019 Application Dated: 06/12/2019 |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0659 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0078 |
| Class II Permissive Change to add specific portable configuration host described in the filing(Limited to the Wireless LAN(2.4 GHz band:Low Power Mode, 5 GHz band:High Power Mode) and Bluetooth Low Energy). Limited Modular approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : Digital Camera 1DR026). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.
The highest reported SAR for Body-worn and Simultaneous transmission exposure conditions are 0.29 W/kg and 0.41 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 06/12/2019 Application Dated: 06/12/2019 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC ND | 15E | 5180.0 - 5320.0 | 0.0277 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.0238 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0172 |
| Class II Permissive Change to add specific portable configuration host described in the filing(Limited to the Wireless LAN(2.4 GHz band:Low Power Mode, 5 GHz band:High Power Mode) and Bluetooth Low Energy). Limited Modular approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : Digital Camera 1DR026). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.
The highest reported SAR for Body-worn and Simultaneous transmission exposure conditions are 0.29 W/kg and 0.41 W/kg, respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 4oBkja8JcSt4sMJIPPWrsQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 06/12/2019 Application Dated: 06/12/2019 |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC ND | 15E | 5180.0 - 5320.0 | 0.0277 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.0238 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0172 |
| Class II Permissive Change to add specific portable configuration host described in the filing(Limited to the Wireless LAN(2.4 GHz band:Low Power Mode, 5 GHz band:High Power Mode) and Bluetooth Low Energy). Limited Modular approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : Digital Camera 1DR026). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.
The highest reported SAR for Body-worn and Simultaneous transmission exposure conditions are 0.29 W/kg and 0.41 W/kg, respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 04/10/2015 Application Dated: 04/10/2015 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC ND | 15E | 5180.0 - 5320.0 | 0.0277 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.0238 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0172 |
| Limited Modular approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Special test jig board is used for the evaluation. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 2ar6DPf8Y9VOhjooN3Ijhw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 04/10/2015 Application Dated: 04/10/2015 |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC ND | 15E | 5180.0 - 5320.0 | 0.0277 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.0238 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0172 |
| Limited Modular approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Special test jig board is used for the evaluation. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 04/10/2015 Application Dated: 04/10/2015 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.3581 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0078 |
| Limited Modular approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Special test jig board is used for the evaluation. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 1+WnqQHJm/EsrPtrxeIbJQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 04/10/2015 Application Dated: 04/10/2015 |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.3581 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0078 |
| Limited Modular approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Special test jig board is used for the evaluation. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 12/24/2015 Application Dated: 12/23/2015 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.3581 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0078 |
| Class II Permissive Change to add specific portable configuration host described in the filing(Limited to the Wireless LAN(2.4GHz band) and Bluetooth Low Energy). Limited Modular approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : Digital Camera 1DR003). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The highest reported SAR values for head and body-worn are 1.17 W/kg and 1.08 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application /6W1qIDmJYJe2yp1IvDR6Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 12/24/2015 Application Dated: 12/23/2015 |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB1DR |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.3581 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0078 |
| Class II Permissive Change to add specific portable configuration host described in the filing(Limited to the Wireless LAN(2.4GHz band) and Bluetooth Low Energy). Limited Modular approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : Digital Camera 1DR003). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The highest reported SAR values for head and body-worn are 1.17 W/kg and 1.08 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |