FCC ID VPYLB1PJ

W-LAN + Bluetooth Module

by Murata Manufacturing Co., Ltd.

Grantee Code: VPY   Product Code: LB1PJ
Latest application date: 2018-02-12

FCC ID Device Details

FCC IDVPYLB1PJ
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeVPY
Product CodeLB1PJ
Applicant BusinessMurata Manufacturing Co., Ltd. 🇯🇵
Related Domains murata.com
Equipment ClassW-LAN + Bluetooth Module
Test FirmMRT Technology (Suzhou) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2018-02-12
2402-2480 MHzOriginal Equipment2018-02-11
2402-2480 MHzOriginal Equipment2018-02-11

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2018-02-12PDF 3.1 MB
Users ManualUsers Manual2018-02-12PDF 3.3 MB
Internal PhotosInternal Photos2018-02-12PDF 1.1 MB
External PhotosExternal Photos2018-02-12PDF 1.3 MB
ID Label and Location InfoID Label/Location Info2018-02-12PDF 224.1 KB
Label Location Justification LetterID Label/Location Info2018-02-12PDF 36.6 KB
Test Setup PhotosTest Setup Photos2018-02-12PDF 670.3 KB
Test Report_DFSTest Report2018-02-12PDF 1.9 MB
Test Report_NII_Part 1 of 3Test Report2018-02-12PDF 5.2 MB
Test Report_NII_Part 2 of 3Test Report2018-02-12PDF 5.9 MB
Test Report_NII_Part 3 of 3Test Report2018-02-12PDF 4.1 MB
Test ReportTest Report2018-02-11PDF 5.8 MB
Test Report_BLETest Report2018-02-11PDF 2.1 MB
Test Report_Wi-Fi 2.4GHzTest Report2018-02-11PDF 5.9 MB
Agency LetterCover Letter(s)2018-02-12PDF 94.5 KB
Confidentiality LetterCover Letter(s)2018-02-12PDF 92.5 KB
Module Approval Request LetterCover Letter(s)2018-02-12PDF 316.2 KB
Power of AttoneyCover Letter(s)2018-02-12PDF 30 KB
RF Exposure InfoRF Exposure Info2018-02-12PDF 146.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 221.4 KB
Schematics Metadata onlySchematicsPDF 127 KB
Operation Description_LBEE5ZZ1PJ_ANT_Performance_&_Design_Guidance Metadata onlyOperational DescriptionPDF 398.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 269.4 KB
Operational Description_Software Security Description Metadata onlyOperational DescriptionPDF 169.7 KB

Application Information

Application IDY6w19w0tqgrFB0SDb7hyhw==
Final Action Date2018-02-12
Application PurposeOriginal Equipment
Applicant FRN0017033432
ModelLB1PJ
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionW-LAN + Bluetooth Module
Responsible PartyMOTOO HAYASHI, GENERAL MANAGER, mhayashi@murata.com , 81-75-955-6736
Test FirmMr. Marlin Chen, MRT Technology (Suzhou) Co., Ltd., marlinchen@mrt-cert.com , +86-512-66308358
TCB Emailfcb@us.tuv.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth and WLAN 802.11b/g/n transmitters. This device has 20/40/80 MHz bandwidth modes.

Applications

Application IDDatePurpose
Y6w19w0tqgrFB0SDb7hyhw==2018-02-12Original Equipment
rcEQciDOC8vShJargN4NrA==2018-02-11Original Equipment
4Ozh2dMuMwibC/ummfIq9w==2018-02-11Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002815CCC
2402-2480 MHz0.016800015CCC
2412-2462 MHz0.07515CCC
5180-5240 MHz0.024215E38, CC
5260-5320 MHz0.027715E38, CC
5500-5720 MHz0.024715E38, CC
5745-5825 MHz0.024215E38, CC

Grants

TCB Grant - Application Y6w19w0tqgrFB0SDb7hyhw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 02/12/2018

Application Dated: 02/12/2018
Murata Manufacturing Co., Ltd.
10-1, Higashikotari 1-chome
Nagaokakyo-shi
Kyoto, 617-8555
Japan
 
Attention: MOTOO HAYASHI , GENERAL MANAGER

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VPYLB1PJ
Name of Grantee:  Murata Manufacturing Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: W-LAN + Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0242  
38 CC 15E 5260.0  -  5320.0 0.0277  
38 CC 15E 5500.0  -  5720.0 0.0247  
38 CC 15E 5745.0  -  5825.0 0.0242  

Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth and WLAN 802.11b/g/n transmitters. This device has 20/40/80 MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Y6w19w0tqgrFB0SDb7hyhw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Murata Manufacturing Co., Ltd.
10-1, Higashikotari 1-chome Nagaokakyo-shi
Kyoto, 617-8555
Japan
  Date of Grant: 02/12/2018

Application Dated: 02/12/2018
 
Attention: MOTOO HAYASHI , GENERAL MANAGER

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VPYLB1PJ
Name of Grantee:  Murata Manufacturing Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: W-LAN + Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0242  
38 CC 15E 5260.0  -  5320.0 0.0277  
38 CC 15E 5500.0  -  5720.0 0.0247  
38 CC 15E 5745.0  -  5825.0 0.0242  

Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth and WLAN 802.11b/g/n transmitters. This device has 20/40/80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application rcEQciDOC8vShJargN4NrA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 02/11/2018

Application Dated: 02/11/2018
Murata Manufacturing Co., Ltd.
10-1, Higashikotari 1-chome
Nagaokakyo-shi
Kyoto, 617-8555
Japan
 
Attention: MOTOO HAYASHI , GENERAL MANAGER

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VPYLB1PJ
Name of Grantee:  Murata Manufacturing Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: W-LAN + Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0168  

Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth Low Energy and WLAN 802.11a/b/g/n/ac transmitters.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application rcEQciDOC8vShJargN4NrA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Murata Manufacturing Co., Ltd.
10-1, Higashikotari 1-chome Nagaokakyo-shi
Kyoto, 617-8555
Japan
  Date of Grant: 02/11/2018

Application Dated: 02/11/2018
 
Attention: MOTOO HAYASHI , GENERAL MANAGER

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VPYLB1PJ
Name of Grantee:  Murata Manufacturing Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: W-LAN + Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0168  

Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth Low Energy and WLAN 802.11a/b/g/n/ac transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 4Ozh2dMuMwibC/ummfIq9w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 02/11/2018

Application Dated: 02/11/2018
Murata Manufacturing Co., Ltd.
10-1, Higashikotari 1-chome
Nagaokakyo-shi
Kyoto, 617-8555
Japan
 
Attention: MOTOO HAYASHI , GENERAL MANAGER

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VPYLB1PJ
Name of Grantee:  Murata Manufacturing Co., Ltd.
Equipment Class: Digital Transmission System
Notes: W-LAN + Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0028  
CC 15C 2412.0  -  2462.0 0.075  

Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and WLAN 802.11a/n/ac transmitters. This device has 20/40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 4Ozh2dMuMwibC/ummfIq9w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Murata Manufacturing Co., Ltd.
10-1, Higashikotari 1-chome Nagaokakyo-shi
Kyoto, 617-8555
Japan
  Date of Grant: 02/11/2018

Application Dated: 02/11/2018
 
Attention: MOTOO HAYASHI , GENERAL MANAGER

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VPYLB1PJ
Name of Grantee:  Murata Manufacturing Co., Ltd.
Equipment Class: Digital Transmission System
Notes: W-LAN + Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0028  
CC 15C 2412.0  -  2462.0 0.075  

Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and WLAN 802.11a/n/ac transmitters. This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: