FCC ID VPYLBWN572

Communication Module

by Murata Manufacturing Co., Ltd.

Grantee Code: VPY   Product Code: LBWN572
Latest application date: 2012-06-04

FCC ID Device Details

FCC IDVPYLBWN572
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeVPY
Product CodeLBWN572
Applicant BusinessMurata Manufacturing Co., Ltd. 🇯🇵
Related Domains murata.com
Equipment ClassCommunication Module
Test FirmUL Japan, Inc. Shonan EMC EMC Lab.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2012-06-04

Exhibits

DocumentTypeAvailableFile
Users manualUsers Manual2012-12-01PDF 534.7 KB
Internal PhotosInternal Photos2012-12-01PDF 776.4 KB
Internal Photos_DipoleInternal Photos2012-12-01PDF 935 KB
Internal Photos_Inversed FInternal Photos2012-12-01PDF 942.6 KB
Internal Photos_MonopoleInternal Photos2012-12-01PDF 933 KB
External PhotosExternal Photos2012-12-01PDF 776.4 KB
Label & LocationID Label/Location Info2012-06-04PDF 91.7 KB
FCC_Test setup photoTest Setup Photos2012-12-01PDF 176.4 KB
ReportTest Report2012-06-04PDF 2.2 MB
Authorization LetterCover Letter(s)2012-06-04PDF 287.8 KB
LMA letterCover Letter(s)2012-06-04PDF 543.1 KB
Request for confidentiality letterCover Letter(s)2012-06-04PDF 256.2 KB
Request for short-term confidentiality letterCover Letter(s)2012-06-04PDF 266.8 KB
RF Exposure sheetRF Exposure Info2012-06-04PDF 23.7 KB

Application Information

Application IDUMqH6z6Abo38lQi7ePzBcw==
Final Action Date2012-06-04
Application PurposeOriginal Equipment
Applicant FRN0017033432
ModelLBWN572
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionCommunication Module
Responsible PartyMOTOO HAYASHI, GENERAL MANAGER, mhayashi@murata.com , 81-75-955-6736
AgentYoshinobu Yoshinobu Yoshinobu, UL Japan, Inc., Yoshinobu.Asai@ul.com , 81-596-24-8116
Technical ContactToyokazu Imamura, UL Japan, Inc., Toyokazu.Imamura@ul.com , 81-463-50-6400
Test FirmTetsuya Hashimoto, UL Japan, Inc. Shonan EMC EMC Lab., Tetsuya.Hashimoto@jp.ul.com , 81-596-24-8116
TCB Emailemc.jp@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/01/2012
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Modular approval. Output power listed is Conducted (Maximum peak). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

Applications

Application IDDatePurpose
UMqH6z6Abo38lQi7ePzBcw==2012-06-04Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.072300015C

Grants

TCB Grant - Application UMqH6z6Abo38lQi7ePzBcw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 06/04/2012

Application Dated: 06/04/2012
Murata Manufacturing Co., Ltd.
10-1, Higashikotari 1-chome
Nagaokakyo-shi
Kyoto, 617-8555
Japan
 
Attention: MOTOO HAYASHI , GENERAL MANAGER

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VPYLBWN572
Name of Grantee:  Murata Manufacturing Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Communication Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0723  

Limited Modular approval. Output power listed is Conducted (Maximum peak). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

EAS Grant - Application UMqH6z6Abo38lQi7ePzBcw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Murata Manufacturing Co., Ltd.
10-1, Higashikotari 1-chome Nagaokakyo-shi
Kyoto, 617-8555
Japan
  Date of Grant: 06/04/2012

Application Dated: 06/04/2012
 
Attention: MOTOO HAYASHI , GENERAL MANAGER

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VPYLBWN572
Name of Grantee:  Murata Manufacturing Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Communication Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0723  

Limited Modular approval. Output power listed is Conducted (Maximum peak). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.



Mail To: