FCC ID VPYLBYD
Communication Module
by Murata Manufacturing Co., Ltd.
Grantee Code: VPY Product Code: LBYD
Latest application date: 2016-05-31
FCC ID Device Details
| FCC ID | VPYLBYD |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | VPY |
| Product Code | LBYD |
| Applicant Business | Murata Manufacturing Co., Ltd. 🇯🇵 |
| Related Domains |  murata.com |
| Equipment Class | Communication Module |
| Test Firm | UL Japan, Inc. Head office EMC Lab. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-31 |
| 2412-2462 MHz | Original Equipment | 2014-01-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| (Short term Confidential)Users Manual FCC | Users Manual | 2014-07-30 | PDF 276.8 KB |
| (Short term Confidential)Internal Photo | Internal Photos | 2014-07-30 | PDF 293.5 KB |
| (Short-Term Confidential) External Photo | External Photos | 2016-06-13 | PDF 312.6 KB |
| (Short term Confidential)External Photo | External Photos | 2014-07-30 | PDF 408.2 KB |
| FCC Label & Location | ID Label/Location Info | 2014-01-31 | PDF 123.5 KB |
| (Short-Term Confidential) FCC Test Setup Photo_DTS | Test Setup Photos | 2016-06-13 | PDF 676.2 KB |
| (Short term Confidential)FCC Test Setup Photo | Test Setup Photos | 2014-07-30 | PDF 550.7 KB |
| FCC Test Report_DTS | Test Report | 2016-05-31 | PDF 1.5 MB |
| FCC Test Report | Test Report | 2014-01-31 | PDF 856.2 KB |
| FCC Authorization Letter | Cover Letter(s) | 2016-05-31 | PDF 34.4 KB |
| FCC Class II Permissive Change Letter | Cover Letter(s) | 2016-05-31 | PDF 47.5 KB |
| FCC Request for Confidentiality Letter | Cover Letter(s) | 2016-05-31 | PDF 27.6 KB |
| FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2016-05-31 | PDF 29.2 KB |
| FCC Special Power of Attorney | Cover Letter(s) | 2016-05-31 | PDF 259.3 KB |
| FCC Authorization Letter | Cover Letter(s) | 2014-01-31 | PDF 255.6 KB |
| FCC LMA Letter | Cover Letter(s) | 2014-01-31 | PDF 495.7 KB |
| FCC Request for Confidentiality Letter | Cover Letter(s) | 2014-01-31 | PDF 224.4 KB |
| FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2014-01-31 | PDF 237.3 KB |
| RF Exposure Info | RF Exposure Info | 2014-01-31 | PDF 54.7 KB |
| (Confidential) Theory of Operation-Antenna List Metadata only | Operational Description | PDF 29.2 KB | |
| (Confidential) Theory of Operation-Antenna Specification Metadata only | Operational Description | PDF 441.4 KB |
Application Information
| Application ID | gVHadx2gYRzonwqHlggRgQ== |
|---|---|
| Final Action Date | 2016-05-31 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0017033432 |
| Model | LBYD |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Communication Module |
| Responsible Party | MOTOO HAYASHI, GENERAL MANAGER, mhayashi@murata.com , 81-75-955-6736 |
| Agent | Yoshihisa Yoshihisa Yoshihisa, UL Japan, Inc., Yoshihisa.Maeda@ul.com  , 81-596-24-8999 |
| Technical Contact | Takayuki Shimada, UL Japan, Inc., Takayuki.Shimada@ul.com , 81-596-24-8999 |
| Test Firm | Tetsuya Hashimoto, UL Japan, Inc. Head office EMC Lab., Tetsuya.Hashimoto@jp.ul.com  , +81-596-24-8116 |
| TCB Email | emc.jp@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 06/13/2016 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Maximum peak). Separate evaluation must be required for any portable configuration. Host systems must provide regulated supply voltages to the module. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Additional host systems will require reassessment due to the lack of voltage regulation and use special test jig board. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| gVHadx2gYRzonwqHlggRgQ== | 2016-05-31 | Class II permissive change or modification of presently authorized equipment |
| 631WH05Da5tYi1xwdCR7qQ== | 2014-01-31 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.2361000 | 15C |
Grants
TCB Grant - Application gVHadx2gYRzonwqHlggRgQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 05/31/2016 Application Dated: 05/31/2016 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLBYD |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2361 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Maximum peak). Separate evaluation must be required for any portable configuration. Host systems must provide regulated supply voltages to the module. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Additional host systems will require reassessment due to the lack of voltage regulation and use special test jig board. |
EAS Grant - Application gVHadx2gYRzonwqHlggRgQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 05/31/2016 Application Dated: 05/31/2016 |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLBYD |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2361 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Maximum peak). Separate evaluation must be required for any portable configuration. Host systems must provide regulated supply voltages to the module. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Additional host systems will require reassessment due to the lack of voltage regulation and use special test jig board. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 01/31/2014 Application Dated: 01/31/2014 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLBYD |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2361 |
| Limited Modular Approval. Output power listed is Conducted(Maximum peak). Separate evaluation must be required for any portable configuration. Host systems must provide regulated supply voltages to the module. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Additional host systems will require reassessment due to the lack of voltage regulation and use special test jig board. |
EAS Grant - Application 631WH05Da5tYi1xwdCR7qQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 01/31/2014 Application Dated: 01/31/2014 |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLBYD |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2361 |
| Limited Modular Approval. Output power listed is Conducted(Maximum peak). Separate evaluation must be required for any portable configuration. Host systems must provide regulated supply voltages to the module. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Additional host systems will require reassessment due to the lack of voltage regulation and use special test jig board. |
| Mail To: |