FCC ID VQF-RT3593

802.11a/b/g/n 3T3R WLAN Mini Card

by MediaTek Inc.

Grantee Code: VQF   Product Code: RT3593
Latest application date: 2010-09-23

FCC ID Device Details

FCC IDVQF-RT3593
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeVQF
Product CodeRT3593
Applicant BusinessMediaTek Inc. 🇹🇼
Related Domains mediatek.com tw.bureauveritas.com
Equipment Class802.11a/b/g/n 3T3R WLAN Mini Card
Test FirmBureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2010-09-23
2412-2462 MHzOriginal Equipment2010-09-23

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2010-09-23PDF 1.9 MB
Internal PhotosInternal Photos2010-09-23PDF 730.8 KB
External PhotosExternal Photos2010-09-23PDF 535.1 KB
Label and LocationID Label/Location Info2010-09-23PDF 45.5 KB
Operational DescriptionOperational Description2010-09-23PDF 11.7 KB
Test Setup PhotosTest Setup Photos2010-09-23PDF 314.8 KB
Test Setup Photos - DFSTest Setup Photos2010-09-23PDF 122.2 KB
Test Report - 15CTest Report2010-09-23PDF 1.7 MB
Test Report - 15ETest Report2010-09-23PDF 2 MB
Test Report - DFSTest Report2010-09-23PDF 596.2 KB
Attestation Letter 1Attestation Statements2010-09-23PDF 46.9 KB
Attestation Letter 2Attestation Statements2010-09-23PDF 46.9 KB
Confidentiality RequestCover Letter(s)2010-09-23PDF 38.9 KB
Cover Letter Agent AuthorizationCover Letter(s)2010-09-23PDF 47 KB
Cover Letter Contact AuthorizationCover Letter(s)2010-09-23PDF 52.8 KB
Cover Letter Modular Approval RequestCover Letter(s)2010-09-23PDF 36 KB
RF Exposure InfoRF Exposure Info2010-09-23PDF 233.6 KB

Application Information

Application IDcOP3xOlUgulAOAYxOG0aNA==
Final Action Date2010-09-23
Application PurposeOriginal Equipment
Applicant FRN0022229074
Model-RT3593
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11a/b/g/n 3T3R WLAN Mini Card
Responsible PartySiegfried Chang, siegfried.chang@mediatek.com , 886-3-560-0766
Technical ContactHank Chung, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, hank.chung@tw.bureauveritas.com , 886-3-593-5343
Non-Technical ContactWendy Liao, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, wendy.liao@tw.bureauveritas.com , 886-3-3183232
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com , 886-3-3183232
TCB Emailcertification@curtis-straus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure conditions, Device is a draft 802.11abgn Mini Card operating in a 3x3 MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.

Applications

Application IDDatePurpose
cOP3xOlUgulAOAYxOG0aNA==2010-09-23Original Equipment
N/J8K1ARdbvQteRloM+jjg==2010-09-23Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.61715CCC, MO
5180-5240 MHz0.04715ECC, MO, ND
5260-5320 MHz0.15415ECC, MO, ND
5500-5700 MHz0.14215ECC, MO, ND
5745-5825 MHz0.43815CCC, MO

Grants

TCB Grant - Application N/J8K1ARdbvQteRloM+jjg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 09/23/2010

Application Dated: 09/23/2010
MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu, 30078
Taiwan
 
Attention: Siegfried Chang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQF-RT3593
Name of Grantee:  MediaTek Inc.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n 3T3R WLAN Mini Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.617  
CC MO 15C 5745.0  -  5825.0 0.438  

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure conditions, Device is a draft 802.11abgn Mini Card operating in a 3x3 MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application N/J8K1ARdbvQteRloM+jjg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu, 30078
Taiwan
  Date of Grant: 09/23/2010

Application Dated: 09/23/2010
 
Attention: Siegfried Chang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQF-RT3593
Name of Grantee:  MediaTek Inc.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n 3T3R WLAN Mini Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.617  
CC MO 15C 5745.0  -  5825.0 0.438  

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure conditions, Device is a draft 802.11abgn Mini Card operating in a 3x3 MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application cOP3xOlUgulAOAYxOG0aNA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 09/23/2010

Application Dated: 09/23/2010
MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu, 30078
Taiwan
 
Attention: Siegfried Chang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQF-RT3593
Name of Grantee:  MediaTek Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n 3T3R WLAN Mini Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.047  
CC MO ND 15E 5260.0  -  5320.0 0.154  
CC MO ND 15E 5500.0  -  5700.0 0.142  

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure conditions, Device is a draft 802.11abgn Mini Card operating in a 3x3 MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application cOP3xOlUgulAOAYxOG0aNA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu, 30078
Taiwan
  Date of Grant: 09/23/2010

Application Dated: 09/23/2010
 
Attention: Siegfried Chang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQF-RT3593
Name of Grantee:  MediaTek Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n 3T3R WLAN Mini Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.047  
CC MO ND 15E 5260.0  -  5320.0 0.154  
CC MO ND 15E 5500.0  -  5700.0 0.142  

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure conditions, Device is a draft 802.11abgn Mini Card operating in a 3x3 MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: