FCC ID VQK-F04J

Mobile Phone

by Fujitsu Limited

Grantee Code: VQK   Product Code: F04J
Latest application date: 2017-01-10

Device Images

FCC ID Device Details

FCC IDVQK-F04J
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeVQK
Product CodeF04J
Applicant BusinessFujitsu Limited 🇯🇵
Related Domains fujitsu.com sgs.com
Equipment ClassMobile Phone
Test FirmSGS Taiwan Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2017-01-10
13.56 MHzOriginal Equipment2017-01-10
5180-5240 MHzOriginal Equipment2017-01-10
2402-2480 MHzOriginal Equipment2017-01-10
824.2-848.8 MHzOriginal Equipment2017-01-10

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2017-03-07PDF 5.6 MB
Internal PhotosInternal Photos2017-03-07PDF 1.4 MB
External PhotosExternal Photos2017-03-07PDF 837.6 KB
External photoExternal Photos2017-03-07PDF 837.6 KB
ID Label/Location InfoID Label/Location Info2017-01-10PDF 68.1 KB
Test Setup Photos_JBPTest Setup Photos2017-03-07PDF 369.3 KB
Test Setup Photos_NIITest Setup Photos2017-03-07PDF 1.8 MB
Test Setup Photos_SARTest Setup Photos2017-03-07PDF 587.1 KB
DTS Test Report_BLETest Report2017-01-10PDF 2.3 MB
DTS Test Report_WLANTest Report2017-01-10PDF 2.4 MB
Test Report_DFSTest Report2017-01-10PDF 762.5 KB
Test Report_DSSTest Report2017-01-10PDF 4.8 MB
Test Report_DXXTest Report2017-01-10PDF 861.6 KB
Test Report_JBPTest Report2017-01-10PDF 470 KB
Test Report_NIITest Report2017-01-10PDF 4.3 MB
Test Report_PCETest Report2017-01-10PDF 4.6 MB
Test Report_SARRF Exposure Info2017-01-10PDF 2 MB
Declaration_of_GSM_UMTS_LTE_for_EUJP_BandCover Letter(s)2017-01-10PDF 58.6 KB
Declaration_of_WLAN_CHCover Letter(s)2017-01-10PDF 54.7 KB
LTC_letterCover Letter(s)2017-01-10PDF 110.7 KB
Letter_of_AuthorizationCover Letter(s)2017-01-10PDF 67.6 KB
POA_contact_personCover Letter(s)2017-01-10PDF 37.9 KB
STC_letterCover Letter(s)2017-01-10PDF 43.3 KB
WiFi_AP_and_AdHoc_mode_for_DFS_bandCover Letter(s)2017-01-10PDF 155.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 796.1 KB
Schematics Metadata onlySchematicsPDF 1.6 MB
Operation Description_Software_Security_for_UNII_Devices Metadata onlyOperational DescriptionPDF 106.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 107.1 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 45.5 KB
Tune up Procedure Metadata onlyParts List/Tune Up InfoPDF 121.7 KB

Application Information

Application IDyamb2RhXOSCxvwIEciMAIQ==
Final Action Date2017-01-10
Application PurposeOriginal Equipment
Applicant FRN0016383648
ModelF04J
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionMobile Phone
Responsible PartyMasahiro Kurosawa, kurosawa_masa@fujitsu.com , +81-50-3358-3533
Technical ContactWillis Chen, SGS Taiwan Ltd., willis.chen@sgs.com , 886222993279
Non-Technical ContactWillis Chen, SGS Taiwan Ltd., willis.chen@sgs.com , 886222993279
Test FirmRyan Wang, SGS Taiwan Ltd., Ryan-ec.wang@sgs.com , +886-2-2299-3279
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date03/07/2017
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output is conducted. End-users must be informed of transmitter operating conditions for satisfying RF exposure compliance. SAR compliance for body-worn operating conditions is limited to the specific configuration tested for this filing. The highest reported SAR for body-worn accessory, and simultaneous transmission are < 0.10 W/kg, and 0.93 W/kg, respectively.

Applications

Application IDDatePurpose
yamb2RhXOSCxvwIEciMAIQ==2017-01-10Original Equipment
i1jdCezcDLw/DI1dDNY4tw==2017-01-10Original Equipment
YcjJeb0foeZqb8IWRKxYpw==2017-01-10Original Equipment
GqghKUXPhJXQ115h71IxUg==2017-01-10Original Equipment
GAMsqHKAB4IeU5ghIY4uWQ==2017-01-10Original Equipment
1ANsJRivekeHwqu3w/wn4Q==2017-01-10Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
15BCC
13.56 MHz15CCC
824.2-848.8 MHz0.2362.5ppm245KGXW22H
826.4-846.6 MHz0.1162.5ppm4M12F9W22H
1850.2-1909.8 MHz0.6612.5ppm247KGXW24E
2402-2480 MHz0.011000015CCC
2402-2480 MHz0.001515CCC
2412-2462 MHz0.1315CCC
5180-5240 MHz0.01915E38, CC, ND
5260-5320 MHz0.01815E38, CC, ND
5500-5700 MHz0.01715E38, CC, ND

Grants

TCB Grant - Application YcjJeb0foeZqb8IWRKxYpw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 01/10/2017

Application Dated: 01/06/2017
Fujitsu Limited
1-1 Kamikodanaka 4-chome
Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F04J
Name of Grantee:  Fujitsu Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC ND 15E 5180.0  -  5240.0 0.019  
38 CC ND 15E 5260.0  -  5320.0 0.018  
38 CC ND 15E 5500.0  -  5700.0 0.017  

Power Output is conducted. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. Body worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for head, body-worn accessoray ,and simultaneous transmission use conditions are 0.16 W/kg, < 0.10 W/kg, and 0.98 W/kg, respectively.

This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, 5290 MHz, 5530 MHz, and 5610 MHz.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application YcjJeb0foeZqb8IWRKxYpw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fujitsu Limited
1-1 Kamikodanaka 4-chome Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
  Date of Grant: 01/10/2017

Application Dated: 01/06/2017
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F04J
Name of Grantee:  Fujitsu Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC ND 15E 5180.0  -  5240.0 0.019  
38 CC ND 15E 5260.0  -  5320.0 0.018  
38 CC ND 15E 5500.0  -  5700.0 0.017  

Power Output is conducted. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. Body worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for head, body-worn accessoray ,and simultaneous transmission use conditions are 0.16 W/kg, < 0.10 W/kg, and 0.98 W/kg, respectively.

This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, 5290 MHz, 5530 MHz, and 5610 MHz.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application yamb2RhXOSCxvwIEciMAIQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 01/10/2017

Application Dated: 01/06/2017
Fujitsu Limited
1-1 Kamikodanaka 4-chome
Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F04J
Name of Grantee:  Fujitsu Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.011  

Power Output is conducted. End-users must be informed of transmitter operating conditions for satisfying RF exposure compliance. SAR compliance for body-worn operating conditions is limited to the specific configuration tested for this filing. The highest reported SAR for body-worn accessory, and simultaneous transmission are < 0.10 W/kg, and 0.93 W/kg, respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application yamb2RhXOSCxvwIEciMAIQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fujitsu Limited
1-1 Kamikodanaka 4-chome Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
  Date of Grant: 01/10/2017

Application Dated: 01/06/2017
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F04J
Name of Grantee:  Fujitsu Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.011  

Power Output is conducted. End-users must be informed of transmitter operating conditions for satisfying RF exposure compliance. SAR compliance for body-worn operating conditions is limited to the specific configuration tested for this filing. The highest reported SAR for body-worn accessory, and simultaneous transmission are < 0.10 W/kg, and 0.93 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application i1jdCezcDLw/DI1dDNY4tw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 01/10/2017

Application Dated: 01/06/2017
Fujitsu Limited
1-1 Kamikodanaka 4-chome
Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F04J
Name of Grantee:  Fujitsu Limited
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 13.56  -  13.56  


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application i1jdCezcDLw/DI1dDNY4tw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fujitsu Limited
1-1 Kamikodanaka 4-chome Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
  Date of Grant: 01/10/2017

Application Dated: 01/06/2017
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F04J
Name of Grantee:  Fujitsu Limited
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 13.56  -  13.56  


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application GqghKUXPhJXQ115h71IxUg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 01/10/2017

Application Dated: 01/06/2017
Fujitsu Limited
1-1 Kamikodanaka 4-chome
Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F04J
Name of Grantee:  Fujitsu Limited
Equipment Class: Digital Transmission System
Notes: Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.13  
CC 15C 2402.0  -  2480.0 0.0015  

Power Output is conducted. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. Body worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body, which includes use as hotspot. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for head, body-worn accessoray, product specific (wireless router), and simultaneous transmission use conditions are < 0.10 W/kg, < 0.10 W/kg, < 0.10 W/kg, and 0.98 W/kg, respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application GqghKUXPhJXQ115h71IxUg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fujitsu Limited
1-1 Kamikodanaka 4-chome Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
  Date of Grant: 01/10/2017

Application Dated: 01/06/2017
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F04J
Name of Grantee:  Fujitsu Limited
Equipment Class: Digital Transmission System
Notes: Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.13  
CC 15C 2402.0  -  2480.0 0.0015  

Power Output is conducted. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. Body worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body, which includes use as hotspot. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for head, body-worn accessoray, product specific (wireless router), and simultaneous transmission use conditions are < 0.10 W/kg, < 0.10 W/kg, < 0.10 W/kg, and 0.98 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application GAMsqHKAB4IeU5ghIY4uWQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 01/10/2017

Application Dated: 01/06/2017
Fujitsu Limited
1-1 Kamikodanaka 4-chome
Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F04J
Name of Grantee:  Fujitsu Limited
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application GAMsqHKAB4IeU5ghIY4uWQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fujitsu Limited
1-1 Kamikodanaka 4-chome Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
  Date of Grant: 01/10/2017

Application Dated: 01/06/2017
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F04J
Name of Grantee:  Fujitsu Limited
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 1ANsJRivekeHwqu3w/wn4Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 01/10/2017

Application Dated: 01/06/2017
Fujitsu Limited
1-1 Kamikodanaka 4-chome
Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F04J
Name of Grantee:  Fujitsu Limited
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 0.236 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.661 2.5  PM 247KGXW
22H 826.4  -  846.6 0.116 2.5  PM 4M12F9W

Power Output is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operating conditions is limited to the specific configuration tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body, which includes use as hotspot. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.37 W/kg, 0.65 W/kg, 0.90 W/kg, and 0.98 W/kg, respectively.

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.


EAS Grant - Application 1ANsJRivekeHwqu3w/wn4Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fujitsu Limited
1-1 Kamikodanaka 4-chome Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
  Date of Grant: 01/10/2017

Application Dated: 01/06/2017
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F04J
Name of Grantee:  Fujitsu Limited
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 0.236 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.661 2.5  PM 247KGXW
22H 826.4  -  846.6 0.116 2.5  PM 4M12F9W

Power Output is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operating conditions is limited to the specific configuration tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body, which includes use as hotspot. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.37 W/kg, 0.65 W/kg, 0.90 W/kg, and 0.98 W/kg, respectively.

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.



Mail To: