FCC ID VQK-F06F2

Smart Phone

by Fujitsu Limited

Grantee Code: VQK   Product Code: F06F2
Latest application date: 2015-06-16

FCC ID Device Details

FCC IDVQK-F06F2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeVQK
Product CodeF06F2
Applicant BusinessFujitsu Limited 🇯🇵
Related Domains fujitsu.com tw.bureauveritas.com
Equipment ClassSmart Phone
Test FirmBureau Veritas CPS(H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2015-06-16
5180-5240 MHzOriginal Equipment2015-06-16
13.56 MHzOriginal Equipment2015-06-16
2402-2480 MHzOriginal Equipment2015-06-16
824.2-848.8 MHzOriginal Equipment2015-06-16

Exhibits

DocumentTypeAvailableFile
Users Manual-1Users Manual2015-07-16PDF 5.6 MB
Users Manual-2Users Manual2015-07-16PDF 2.5 MB
Users Manual-3Users Manual2015-07-16PDF 5.4 MB
Declaration of ManualCover Letter(s)2015-06-16PDF 185.4 KB
Internal PhotosInternal Photos2015-07-16PDF 434.9 KB
External PhotosExternal Photos2015-07-16PDF 336.7 KB
ID LabelID Label/Location Info2015-06-16PDF 867.1 KB
Label LocationID Label/Location Info2015-06-16PDF 1.6 MB
Test Setup PhotosTest Setup Photos2015-07-16PDF 507 KB
Test Setup Photos for SARTest Setup Photos2015-07-16PDF 682.8 KB
Test Setup photoTest Setup Photos2015-07-16PDF 507 KB
Test Setup photo for SARTest Setup Photos2015-07-16PDF 682.8 KB
SAR Test ReportRF Exposure Info2015-06-16PDF 4.8 MB
Test ReportTest Report2015-06-16PDF 1.1 MB
Test ReportTest Report2015-06-16PDF 274.6 KB
Test ReportTest Report2015-06-16PDF 305.1 KB
Test Report-1Test Report2015-06-16PDF 707.5 KB
Test Report-2Test Report2015-06-16PDF 599 KB
Test reports (DTSTest Report2015-06-16PDF 964.5 KB
Test reports (DTS-BT LE)Test Report2015-06-16PDF 477.6 KB
Test reports (PCE-Part 22)Test Report2015-06-16PDF 1.6 MB
Test reports (PCE-Part 24)Test Report2015-06-16PDF 756.2 KB
Authorization letterCover Letter(s)2015-06-16PDF 66.7 KB
Confidentiality for long-termCover Letter(s)2015-06-16PDF 112.2 KB
Confidentiality for short-termCover Letter(s)2015-06-16PDF 51.1 KB
Declaration of Ad HocCover Letter(s)2015-06-16PDF 65.5 KB
Declaration of GSM, UMTS & LTECover Letter(s)2015-06-16PDF 103 KB
Declaration of WLANCover Letter(s)2015-06-16PDF 81.4 KB
RF Exposure InfoRF Exposure Info2015-06-16PDF 125 KB
RF Exposure InfoRF Exposure Info2015-06-16PDF 4.8 MB
Block Diagram Metadata onlyBlock DiagramPDF 271.9 KB
Block Diagrams Metadata onlyBlock DiagramPDF 271.9 KB
Schematics (Daughter Board) Metadata onlySchematicsPDF 467.8 KB
Schematics (Main Board) Metadata onlySchematicsPDF 2.5 MB
Operational Description Metadata onlyOperational DescriptionPDF 123.6 KB
Software Operational description Metadata onlyOperational DescriptionPDF 62 KB
Part List Metadata onlyParts List/Tune Up InfoPDF 20.6 KB
Parts list Metadata onlyParts List/Tune Up InfoPDF 20.6 KB
Tune Up Info Metadata onlyParts List/Tune Up InfoPDF 223.7 KB

Application Information

Application IDo07/x5RpPfgXDAkAAlYc4A==
Final Action Date2015-06-16
Application PurposeOriginal Equipment
Applicant FRN0016383648
ModelF06F2
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionSmart Phone
Responsible PartyMasahiro Kurosawa, kurosawa_masa@fujitsu.com , +81-50-3358-3533
Technical ContactRobert Huang, Bureau Veritas Consumer Products Services, robert.huang@tw.bureauveritas.com , 886-3-318-3232
Non-Technical ContactAndrea Hsia, Bureau Veritas Consumer Products Services, andrea.hsia@tw.bureauveritas.com , 886-3-318-3232
Test FirmRichard Chen, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com , +886-(0)3-260-0884
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/16/2015
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output is conducted. End-users must be informed of transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
o07/x5RpPfgXDAkAAlYc4A==2015-06-16Original Equipment
HiGLJR/fV9AGkv0fTNA7MQ==2015-06-16Original Equipment
Eg3hfLy3DfSjGn5qujjL1A==2015-06-16Original Equipment
EMXQDcNYZ3rUkNvtim7mZw==2015-06-16Original Equipment
E6+N4Lo7s49vXTgeHpdIfQ==2015-06-16Original Equipment
6TrSM+FcjCZarSvJP7N62Q==2015-06-16Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
15BCC
13.56 MHz15CCC
824.2-848.8 MHz0.990.047ppm265KGXW22H
826.4-846.6 MHz0.1610.051ppm4M15F9W22H
1850.2-1909.8 MHz0.320.022ppm250KGXW24E
2402-2480 MHz0.010000015CCC
2402-2480 MHz0.00215CCC
2412-2462 MHz0.1215CCC
5180-5240 MHz0.03415E38, CC
5260-5320 MHz0.03315E38, CC, ND
5500-5700 MHz0.02915E38, CC, ND

Grants

TCB Grant - Application o07/x5RpPfgXDAkAAlYc4A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 06/16/2015

Application Dated: 06/12/2015
Fujitsu Limited
1-1 Kamikodanaka 4-chome
Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F06F2
Name of Grantee:  Fujitsu Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output is conducted. End-users must be informed of transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application o07/x5RpPfgXDAkAAlYc4A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fujitsu Limited
1-1 Kamikodanaka 4-chome Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
  Date of Grant: 06/16/2015

Application Dated: 06/12/2015
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F06F2
Name of Grantee:  Fujitsu Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power Output is conducted. End-users must be informed of transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application HiGLJR/fV9AGkv0fTNA7MQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 06/16/2015

Application Dated: 06/12/2015
Fujitsu Limited
1-1 Kamikodanaka 4-chome
Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F06F2
Name of Grantee:  Fujitsu Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.034  
38 CC ND 15E 5260.0  -  5320.0 0.033  
38 CC ND 15E 5500.0  -  5700.0 0.029  

Output power is conducted. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. Body worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 15 mm separation between the device and the user's body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for head, body-worn accessory and simultaneous transmission use conditions are 0.03 W/kg, 0.02 W/kg, and 0.44 W/kg, respectively.

This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, 5290 MHz and 5530 MHz MHz.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application HiGLJR/fV9AGkv0fTNA7MQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fujitsu Limited
1-1 Kamikodanaka 4-chome Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
  Date of Grant: 06/16/2015

Application Dated: 06/12/2015
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F06F2
Name of Grantee:  Fujitsu Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.034  
38 CC ND 15E 5260.0  -  5320.0 0.033  
38 CC ND 15E 5500.0  -  5700.0 0.029  

Output power is conducted. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. Body worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 15 mm separation between the device and the user's body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for head, body-worn accessory and simultaneous transmission use conditions are 0.03 W/kg, 0.02 W/kg, and 0.44 W/kg, respectively.

This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, 5290 MHz and 5530 MHz MHz.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application EMXQDcNYZ3rUkNvtim7mZw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 06/16/2015

Application Dated: 06/12/2015
Fujitsu Limited
1-1 Kamikodanaka 4-chome
Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F06F2
Name of Grantee:  Fujitsu Limited
Equipment Class: Digital Transmission System
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.12  
CC 15C 2402.0  -  2480.0 0.002  

Output power is conducted. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. Body worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 15 mm separation between the device and the user's body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for head, body-worn accessory and simultaneous transmission use conditions are 0.12 W/kg, 0.02 W/kg and 0.44 W/kg, respectively.

This device has 20 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application EMXQDcNYZ3rUkNvtim7mZw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fujitsu Limited
1-1 Kamikodanaka 4-chome Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
  Date of Grant: 06/16/2015

Application Dated: 06/12/2015
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F06F2
Name of Grantee:  Fujitsu Limited
Equipment Class: Digital Transmission System
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.12  
CC 15C 2402.0  -  2480.0 0.002  

Output power is conducted. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. Body worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 15 mm separation between the device and the user's body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for head, body-worn accessory and simultaneous transmission use conditions are 0.12 W/kg, 0.02 W/kg and 0.44 W/kg, respectively.

This device has 20 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Eg3hfLy3DfSjGn5qujjL1A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 06/16/2015

Application Dated: 06/12/2015
Fujitsu Limited
1-1 Kamikodanaka 4-chome
Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F06F2
Name of Grantee:  Fujitsu Limited
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 13.56  -  13.56  


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Eg3hfLy3DfSjGn5qujjL1A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fujitsu Limited
1-1 Kamikodanaka 4-chome Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
  Date of Grant: 06/16/2015

Application Dated: 06/12/2015
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F06F2
Name of Grantee:  Fujitsu Limited
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 13.56  -  13.56  


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application E6+N4Lo7s49vXTgeHpdIfQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 06/16/2015

Application Dated: 06/12/2015
Fujitsu Limited
1-1 Kamikodanaka 4-chome
Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F06F2
Name of Grantee:  Fujitsu Limited
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 0.99 0.047  PM 265KGXW
22H 826.4  -  846.6 0.161 0.051  PM 4M15F9W
24E 1850.2  -  1909.8 0.32 0.022  PM 250KGXW

Output power is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operating conditions is limited to the specific configuration tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 15 mm separation between the device and the user's body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for head, body-worn accessory and simultaneous transmission use conditions are 0.37 W/kg, 0.42 W/kg, and 0.58 W/kg, respectively.

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.


EAS Grant - Application E6+N4Lo7s49vXTgeHpdIfQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fujitsu Limited
1-1 Kamikodanaka 4-chome Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
  Date of Grant: 06/16/2015

Application Dated: 06/12/2015
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F06F2
Name of Grantee:  Fujitsu Limited
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 0.99 0.047  PM 265KGXW
22H 826.4  -  846.6 0.161 0.051  PM 4M15F9W
24E 1850.2  -  1909.8 0.32 0.022  PM 250KGXW

Output power is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operating conditions is limited to the specific configuration tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 15 mm separation between the device and the user's body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for head, body-worn accessory and simultaneous transmission use conditions are 0.37 W/kg, 0.42 W/kg, and 0.58 W/kg, respectively.

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.



TCB Grant - Application 6TrSM+FcjCZarSvJP7N62Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 06/16/2015

Application Dated: 06/12/2015
Fujitsu Limited
1-1 Kamikodanaka 4-chome
Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F06F2
Name of Grantee:  Fujitsu Limited
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 6TrSM+FcjCZarSvJP7N62Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fujitsu Limited
1-1 Kamikodanaka 4-chome Nakahara-ku
Kawasaki, Kanagawa, 2118588
Japan
  Date of Grant: 06/16/2015

Application Dated: 06/12/2015
 
Attention: Masahiro Kurosawa

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQK-F06F2
Name of Grantee:  Fujitsu Limited
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: