FCC ID VQSAMN11100R44

WHDI Wireless Module

by Amimon Ltd.

Grantee Code: VQS   Product Code: AMN11100R44
Latest application date: 2011-03-30

FCC ID Device Details

FCC IDVQSAMN11100R44
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeVQS
Product CodeAMN11100R44
Applicant BusinessAmimon Ltd. 🇮🇱
Related Domains amimon.com
Equipment ClassWHDI Wireless Module
Test FirmCurtis-Straus LLC, a wholly owned subsidiary of Bu

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzClass II permissive change or modification of presently authorized equipment2011-03-30
5180-5220 MHzClass II permissive change or modification of presently authorized equipment2011-03-30
5745-5825 MHzOriginal Equipment2007-11-30
5180-5220 MHzOriginal Equipment2007-11-30

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2007-11-30PDF 1 MB
Internal PhotosInternal Photos2008-01-14PDF 406.5 KB
External Photos - AntennaExternal Photos2011-03-30PDF 3.6 MB
External PhotosExternal Photos2007-11-30PDF 108.1 KB
FCC Label DrawingID Label/Location Info2007-11-30PDF 8.5 KB
FCC Label LocationID Label/Location Info2007-11-30PDF 42.6 KB
Test Setup PhotosTest Setup Photos2011-03-30PDF 1 MB
Test Setup PhotosTest Setup Photos2007-11-30PDF 223.5 KB
Test ReportTest Report2011-03-30PDF 301.2 KB
Test ReportTest Report2007-11-30PDF 1.4 MB
Test ReportTest Report2007-11-30PDF 1.2 MB
Cover Letter - Agent AuthorizationCover Letter(s)2011-03-30PDF 118.6 KB
Cover Letter - Antenna SpecificationsCover Letter(s)2011-03-30PDF 116.8 KB
Cover Letter - Authorization for Class II Permissive ChangeCover Letter(s)2011-03-30PDF 99.4 KB
Cover Letter - Class II Permissive ChangeCover Letter(s)2011-03-30PDF 148.8 KB
Antenna InformationCover Letter(s)2007-11-30PDF 278.4 KB
Confidentiality Request LetterCover Letter(s)2007-11-30PDF 21.3 KB
FCC Auth LetterCover Letter(s)2007-11-30PDF 61.6 KB
Modular ApprovalCover Letter(s)2007-11-30PDF 1.1 MB
Modular Approval LetterCover Letter(s)2007-11-30PDF 1.1 MB
RF Exposure MPE Calculation - 15CRF Exposure Info2011-03-30PDF 53.8 KB
RF Exposure MPE Calculation - 15ERF Exposure Info2011-03-30PDF 53.8 KB
MPE CalculationRF Exposure Info2007-11-30PDF 35.8 KB

Application Information

Application IDq5csOzYXbbGmvrCOGoCpUQ==
Final Action Date2011-03-30
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0017004433
ModelAMN11100R44
Frequency Range5745-5825 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWHDI Wireless Module
Responsible PartyArik Israel, Arik.Israel@Amimon.com , 972-50-2122029
Test FirmTadas Stukas, Curtis-Straus LLC, a wholly owned subsidiary of Bu, tadas.stukas@us.bureauveritas.com , 9784868880
TCB Emailcertification@curtis-straus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval. Power listed is the maximum combined peak conducted output power. Device is a Spatial Multiplexing MIMO module as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is restricted to indoor-only use for 5.15-5.25 GHz band. Class II permissive change filing to add a new antenna.

Applications

Application IDDatePurpose
q5csOzYXbbGmvrCOGoCpUQ==2011-03-30Class II permissive change or modification of presently authorized equipment
geGpS/NqPI2oWCRkSc0N+w==2011-03-30Class II permissive change or modification of presently authorized equipment
cFvWD0on1MCqq5w8RC1/SQ==2007-11-30Original Equipment
MW2hEIHbckYThaopwXpnpw==2007-11-30Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
5180-5220 MHz0.023400015ECC, MO
5745-5825 MHz0.051400015CCC, MO

Grants

TCB Grant - Application q5csOzYXbbGmvrCOGoCpUQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 03/30/2011

Application Dated: 03/30/2011
Amimon Ltd.
2 Maskit St.
Herzlia, 46733
Israel
 
Attention: Arik Israel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQSAMN11100R44
Name of Grantee:  Amimon Ltd.
Equipment Class: Digital Transmission System
Notes: WHDI Wireless Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 5745.0  -  5825.0 0.0514  

Modular Approval. Power listed is the maximum combined peak conducted output power. Device is a Spatial Multiplexing MIMO module as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is restricted to indoor-only use for 5.15-5.25 GHz band. Class II permissive change filing to add a new antenna.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application q5csOzYXbbGmvrCOGoCpUQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amimon Ltd.
2 Maskit St.
Herzlia, 46733
Israel
  Date of Grant: 03/30/2011

Application Dated: 03/30/2011
 
Attention: Arik Israel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQSAMN11100R44
Name of Grantee:  Amimon Ltd.
Equipment Class: Digital Transmission System
Notes: WHDI Wireless Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 5745.0  -  5825.0 0.0514  

Modular Approval. Power listed is the maximum combined peak conducted output power. Device is a Spatial Multiplexing MIMO module as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is restricted to indoor-only use for 5.15-5.25 GHz band. Class II permissive change filing to add a new antenna.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application MW2hEIHbckYThaopwXpnpw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 11/30/2007

Application Dated: 11/30/2007
Amimon Ltd.
2 Maskit St.
Herzlia, 46733
Israel
 
Attention: Arik Israel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQSAMN11100R44
Name of Grantee:  Amimon Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AMN11100 Transmitter - WHDI Wireless Modules
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5220.0 0.0234  

Moduar Approval. Power listed is the maximum combined peak conducted output power. Device is Spatial Multiplexing MIMO configurations as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided withtransmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Device is restricted to indoor-only use for 5.15-5.25 GHz band.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application MW2hEIHbckYThaopwXpnpw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amimon Ltd.
2 Maskit St.
Herzlia, 46733
Israel
  Date of Grant: 11/30/2007

Application Dated: 11/30/2007
 
Attention: Arik Israel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQSAMN11100R44
Name of Grantee:  Amimon Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AMN11100 Transmitter - WHDI Wireless Modules
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5220.0 0.0234  

Moduar Approval. Power listed is the maximum combined peak conducted output power. Device is Spatial Multiplexing MIMO configurations as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided withtransmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Device is restricted to indoor-only use for 5.15-5.25 GHz band.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application geGpS/NqPI2oWCRkSc0N+w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 03/30/2011

Application Dated: 03/30/2011
Amimon Ltd.
2 Maskit St.
Herzlia, 46733
Israel
 
Attention: Arik Israel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQSAMN11100R44
Name of Grantee:  Amimon Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WHDI Wireless Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5220.0 0.0234  

Modular Approval. Power listed is the maximum combined peak conducted output power. Device is a Spatial Multiplexing MIMO module as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is restricted to indoor-only use for 5.15-5.25 GHz band. Class II permissive change filing to add a new antenna.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application geGpS/NqPI2oWCRkSc0N+w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amimon Ltd.
2 Maskit St.
Herzlia, 46733
Israel
  Date of Grant: 03/30/2011

Application Dated: 03/30/2011
 
Attention: Arik Israel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQSAMN11100R44
Name of Grantee:  Amimon Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WHDI Wireless Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5220.0 0.0234  

Modular Approval. Power listed is the maximum combined peak conducted output power. Device is a Spatial Multiplexing MIMO module as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is restricted to indoor-only use for 5.15-5.25 GHz band. Class II permissive change filing to add a new antenna.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application cFvWD0on1MCqq5w8RC1/SQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 11/30/2007

Application Dated: 11/30/2007
Amimon Ltd.
2 Maskit St.
Herzlia, 46733
Israel
 
Attention: Arik Israel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQSAMN11100R44
Name of Grantee:  Amimon Ltd.
Equipment Class: Digital Transmission System
Notes: AMN11100 Transmitter - WHDI Wireless Modules
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 5745.0  -  5825.0 0.0514  

Moduar Approval. Power listed is the maximum combined peak conducted output power. Device is a Spatial Multiplexing MIMO configurations as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided withtransmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Device is restricted to indoor-only use for 5.15-5.25 GHz band.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application cFvWD0on1MCqq5w8RC1/SQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amimon Ltd.
2 Maskit St.
Herzlia, 46733
Israel
  Date of Grant: 11/30/2007

Application Dated: 11/30/2007
 
Attention: Arik Israel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQSAMN11100R44
Name of Grantee:  Amimon Ltd.
Equipment Class: Digital Transmission System
Notes: AMN11100 Transmitter - WHDI Wireless Modules
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 5745.0  -  5825.0 0.0514  

Moduar Approval. Power listed is the maximum combined peak conducted output power. Device is a Spatial Multiplexing MIMO configurations as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided withtransmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Device is restricted to indoor-only use for 5.15-5.25 GHz band.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: