FCC ID VQSAMN3129201
TxStickPro
by Amimon Ltd.
Grantee Code: VQS Product Code: AMN3129201
Latest application date: 2013-05-30
FCC ID Device Details
| FCC ID | VQSAMN3129201 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | VQS |
| Product Code | AMN3129201 |
| Applicant Business | Amimon Ltd. 🇮🇱 |
| Related Domains |  amimon.com |
| Equipment Class | TxStickPro |
| Test Firm | Bay Area Compliance Laboratories Corp. (Dongguan) |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5270-5310 MHz | Class II permissive change or modification of presently authorized equipment | 2013-05-30 |
| 5190-5230 MHz | Original Equipment | 2013-02-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2013-02-06 | PDF 186.8 KB |
| Internal Photos | Internal Photos | 2013-02-06 | PDF 106.8 KB |
| External Photos | External Photos | 2013-02-06 | PDF 89.4 KB |
| FCC ID Label | ID Label/Location Info | 2013-02-06 | PDF 62.1 KB |
| Test Setup Photos | Test Setup Photos | 2013-05-30 | PDF 231.5 KB |
| Test Setup Photos | Test Setup Photos | 2013-02-06 | PDF 231.3 KB |
| DFS Report | Test Report | 2013-05-30 | PDF 611.6 KB |
| Test Report | Test Report | 2013-05-30 | PDF 1.6 MB |
| Test Report | Test Report | 2013-02-06 | PDF 1.4 MB |
| CIIPC Letter | Cover Letter(s) | 2013-05-30 | PDF 99.4 KB |
| POA | Cover Letter(s) | 2013-05-30 | PDF 561.6 KB |
| Confidential Request Letter | Cover Letter(s) | 2013-02-06 | PDF 153.9 KB |
| Letter from the Applicant | Cover Letter(s) | 2013-02-06 | PDF 194.7 KB |
| Modular Approval Request Letter | Cover Letter(s) | 2013-02-06 | PDF 129.3 KB |
| RF Exposure | RF Exposure Info | 2013-05-30 | PDF 108.6 KB |
| RF Exposure Information | RF Exposure Info | 2013-02-06 | PDF 38.3 KB |
Application Information
| Application ID | 5EP0aPcqAg4T7NA7ZqlHXA== |
|---|---|
| Final Action Date | 2013-05-30 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0017004433 |
| Model | AMN3129201 |
| Frequency Range | 5270-5310 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | TxStickPro |
| Responsible Party | Arik Israel, Arik.Israel@Amimon.com , 972-50-2122029 |
| Test Firm | John Chan, Bay Area Compliance Laboratories Corp. (Dongguan), john.chan@baclcorp.com  , 86-769-86858888 |
| TCB Email | bacl.regulatory@baclcorp.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Class II Permissive Change Application described in this filing. Output power listed is the maximum combined conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions as defined in this filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 5EP0aPcqAg4T7NA7ZqlHXA== | 2013-05-30 | Class II permissive change or modification of presently authorized equipment |
| N4sUrLmZwnNNahSBhTKTqg== | 2013-02-06 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application N4sUrLmZwnNNahSBhTKTqg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 02/06/2013 Application Dated: 02/06/2013 |
| Amimon Ltd. |
| 2 Maskit St. |
| Herzlia, 46733 Israel |
| Attention: Arik Israel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VQSAMN3129201 |
| Name of Grantee: | Amimon Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | TxStickPro |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5190.0 - 5230.0 | 0.038 | |||
| 15E | 5755.0 - 5795.0 | 0.037 |
| Modular Approval. Output power listed is the maximum combined conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions as defined in this filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application N4sUrLmZwnNNahSBhTKTqg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Amimon Ltd. 2 Maskit St. Herzlia, 46733 Israel |
Date of Grant: 02/06/2013 Application Dated: 02/06/2013 |
| Attention: Arik Israel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VQSAMN3129201 |
| Name of Grantee: | Amimon Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | TxStickPro |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5190.0 - 5230.0 | 0.038 | |||
| 15E | 5755.0 - 5795.0 | 0.037 |
| Modular Approval. Output power listed is the maximum combined conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions as defined in this filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 05/30/2013 Application Dated: 05/30/2013 |
| Amimon Ltd. |
| 2 Maskit St. |
| Herzlia, 46733 Israel |
| Attention: Arik Israel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VQSAMN3129201 |
| Name of Grantee: | Amimon Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | TxStickPro |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| ND | 15E | 5270.0 - 5310.0 | 0.0352 | ||
| ND | 15E | 5510.0 - 5550.0 | 0.0337 | ||
| ND | 15E | 5670.0 - 5670.0 | 0.0356 |
| Modular Approval. Class II Permissive Change Application described in this filing. Output power listed is the maximum combined conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions as defined in this filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 5EP0aPcqAg4T7NA7ZqlHXA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Amimon Ltd. 2 Maskit St. Herzlia, 46733 Israel |
Date of Grant: 05/30/2013 Application Dated: 05/30/2013 |
| Attention: Arik Israel |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VQSAMN3129201 |
| Name of Grantee: | Amimon Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | TxStickPro |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| ND | 15E | 5270.0 - 5310.0 | 0.0352 | ||
| ND | 15E | 5510.0 - 5550.0 | 0.0337 | ||
| ND | 15E | 5670.0 - 5670.0 | 0.0356 |
| Modular Approval. Class II Permissive Change Application described in this filing. Output power listed is the maximum combined conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions as defined in this filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |