FCC ID VQSAMN3622301

RxGrizzlyPro

by Amimon Ltd.

Grantee Code: VQS   Product Code: AMN3622301
Latest application date: 2013-05-30

FCC ID Device Details

FCC IDVQSAMN3622301
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeVQS
Product CodeAMN3622301
Applicant BusinessAmimon Ltd. 🇮🇱
Related Domains amimon.com
Equipment ClassRxGrizzlyPro
Test FirmBay Area Compliance Laboratories Corp. (Dongguan)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5270-5310 MHzClass II permissive change or modification of presently authorized equipment2013-05-30
5190-5230 MHzOriginal Equipment2013-02-06

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2013-02-06PDF 186.8 KB
Internal PhotosInternal Photos2013-02-06PDF 119.5 KB
External PhotosExternal Photos2013-02-06PDF 90.4 KB
FCC ID LabelID Label/Location Info2013-02-06PDF 56 KB
Test Setup PhotosTest Setup Photos2013-02-06PDF 270 KB
DFS ReportTest Report2013-05-30PDF 1.3 MB
Test ReportTest Report2013-05-30PDF 995.9 KB
Test reportTest Report2013-02-06PDF 897.3 KB
CIIPC LetterCover Letter(s)2013-05-30PDF 193.8 KB
POACover Letter(s)2013-05-30PDF 561.5 KB
Confidential Request LetterCover Letter(s)2013-02-06PDF 154.5 KB
Letter from the ApplicantCover Letter(s)2013-02-06PDF 98.1 KB
Modular Approval LetterCover Letter(s)2013-02-06PDF 131.2 KB
RF ExposureRF Exposure Info2013-05-30PDF 113 KB
RF Exposure InformationRF Exposure Info2013-02-06PDF 38.3 KB

Application Information

Application IDFS5vAF6WI957T8Ar1UoupA==
Final Action Date2013-05-30
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0017004433
ModelAMN3622301
Frequency Range5270-5310 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionRxGrizzlyPro
Responsible PartyArik Israel, Arik.Israel@Amimon.com , 972-50-2122029
Test FirmJohn Chan, Bay Area Compliance Laboratories Corp. (Dongguan), john.chan@baclcorp.com , 86-769-86858888
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is conducted. This is a proprietary architecture operating with 20 MHz and 40 MHz BW modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
FS5vAF6WI957T8Ar1UoupA==2013-05-30Class II permissive change or modification of presently authorized equipment
8Ollle+swPOUFOeyoVRkCg==2013-02-06Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
5190-5230 MHz0.03815E
5270-5310 MHz0.036515END
5510-5550 MHz0.033315END
5670 MHz0.032515END
5755-5795 MHz0.03615E

Grants

TCB Grant - Application FS5vAF6WI957T8Ar1UoupA==

This application does not exist.

EAS Grant - Application FS5vAF6WI957T8Ar1UoupA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amimon Ltd.
2 Maskit St.
Herzlia, 46733
Israel
  Date of Grant: 05/30/2013

Application Dated: 03/19/2013
 
Attention: Arik Israel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQSAMN3622301
Name of Grantee:  Amimon Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: RxGrizzlyPro
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
ND 15E 5270.0  -  5310.0 0.0365  
ND 15E 5510.0  -  5550.0 0.0333  
ND 15E 5670.0  -  5670.0 0.0325  

Output power is conducted. This is a proprietary architecture operating with 20 MHz and 40 MHz BW modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 8Ollle+swPOUFOeyoVRkCg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 02/06/2013

Application Dated: 02/06/2013
Amimon Ltd.
2 Maskit St.
Herzlia, 46733
Israel
 
Attention: Arik Israel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQSAMN3622301
Name of Grantee:  Amimon Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: RxGrizzlyPro
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5190.0  -  5230.0 0.038  
15E 5755.0  -  5795.0 0.036  

Modular Approval. Output power listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions as defined in this filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

EAS Grant - Application 8Ollle+swPOUFOeyoVRkCg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amimon Ltd.
2 Maskit St.
Herzlia, 46733
Israel
  Date of Grant: 02/06/2013

Application Dated: 02/06/2013
 
Attention: Arik Israel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VQSAMN3622301
Name of Grantee:  Amimon Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: RxGrizzlyPro
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5190.0  -  5230.0 0.038  
15E 5755.0  -  5795.0 0.036  

Modular Approval. Output power listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions as defined in this filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.



Mail To: