FCC ID VSF19799AR

BC04 Bluetooth Radio Module

by Juniper Systems, Inc.

Grantee Code: VSF   Product Code: 19799AR
Latest application date: 2008-10-27

FCC ID Device Details

FCC IDVSF19799AR
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeVSF
Product Code19799AR
Applicant BusinessJuniper Systems, Inc. 🇺🇸
Related Domains junipersys.com elliottlabs.com
Equipment ClassBC04 Bluetooth Radio Module
Test FirmNational Technical Systems - Silicon Valley

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2008-10-27
2402-2482 MHzClass II permissive change or modification of presently authorized equipment2008-10-14
2402-2480 MHzOriginal Equipment2008-06-11

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2008-10-27PDF 2.1 MB
User ManualUsers Manual2008-10-14PDF 2.1 MB
User Manual part 1Users Manual2008-06-11PDF 2.7 MB
User Manual part 2Users Manual2008-06-11PDF 1.7 MB
Internal PhotosInternal Photos2008-10-27PDF 971 KB
Internal PhotosInternal Photos2008-10-14PDF 1.2 MB
Internal PhotosInternal Photos2008-06-11PDF 2.2 MB
External PhotosExternal Photos2008-10-27PDF 1.1 MB
External PhotosExternal Photos2008-10-14PDF 1.6 MB
External PHotosExternal Photos2008-06-11PDF 2.2 MB
Label ResponseCover Letter(s)2008-10-27PDF 48.3 KB
ID LabelID Label/Location Info2008-10-14PDF 374.7 KB
FCC ID LabelID Label/Location Info2008-06-11PDF 153.2 KB
Antenna InfoOperational Description2008-06-11PDF 2.2 MB
Test Configuration PhotographsTest Setup Photos2008-10-27PDF 308.2 KB
Test Setup PhotosTest Setup Photos2008-10-14PDF 569 KB
Test Setup PhotosTest Setup Photos2008-06-11PDF 864.7 KB
Test ReportTest Report2008-10-27PDF 323.1 KB
Test ReportTest Report2008-10-14PDF 1.6 MB
Test ReportTest Report2008-06-11PDF 2 MB
Attestation for modificationsAttestation Statements2008-10-27PDF 245 KB
Attestation for DoCAttestation Statements2008-06-11PDF 28.4 KB
Attestation regarding modelsAttestation Statements2008-06-11PDF 28.4 KB
Agent AuthorizationCover Letter(s)2008-10-27PDF 53.7 KB
C2PC LetterCover Letter(s)2008-10-27PDF 58.6 KB
Cover LetterCover Letter(s)2008-10-27PDF 194.2 KB
Compliance OpinionCover Letter(s)2008-10-14PDF 15.5 KB
Cover letterCover Letter(s)2008-10-14PDF 9.8 KB
Compliance OpinionCover Letter(s)2008-06-11PDF 15.8 KB
Cover letterCover Letter(s)2008-06-11PDF 9.4 KB
Request for ConfidentialityCover Letter(s)2008-06-11PDF 37.1 KB
RF ExposureRF Exposure Info2008-10-27PDF 115.6 KB
RF ExposureRF Exposure Info2008-06-11PDF 11.5 KB

Application Information

Application IDYhWYxB5BJT151vZ6VLhiCQ==
Final Action Date2008-10-27
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0017084591
Model19799AR
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionBC04 Bluetooth Radio Module
Responsible PartyKent Campbell, kent@junipersys.com , 435-753-1881
AgentMark Mark Mark, Elliott Laboratories, doc@elliottlabs.com , 408-245-7800
Technical ContactMark Briggs, Elliott Laboratories, doc@elliottlabs.com , 408-245-7800
Non-Technical ContactDave Guidotti, Elliott Laboratories, doc@elliottlabs.com , 408-245-7800
Test FirmDavid Bare, National Technical Systems - Silicon Valley, david.bare@nts.com , 510-578-3500
TCB Emailtcb@elliottlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsLimited Single Modular

Applications

Application IDDatePurpose
YhWYxB5BJT151vZ6VLhiCQ==2008-10-27Class II permissive change or modification of presently authorized equipment
W39BV0cUYSlfV5ugwxnAYg==2008-10-14Class II permissive change or modification of presently authorized equipment
CobqfhVOYF4ehJxaGL256g==2008-06-11Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.010580015C
2402-2482 MHz0.010580015C

Grants

TCB Grant - Application YhWYxB5BJT151vZ6VLhiCQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems - Silicon Valley
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 10/27/2008

Application Dated: 10/27/2008
Juniper Systems, Inc.
1132 W 1700 N
Logan, UT 84321
 
Attention: Kent Campbell

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VSF19799AR
Name of Grantee:  Juniper Systems, Inc.
Equipment Class: Digital Transmission System
Notes: BC04 Bluetooth Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.01058  

Output power is conducted. This transmitter operates only in the grantee's handheld computer Model Archer, hand held computer TK6000 and body-worn computer Model Allegro MX. Collocated transmitter operating configurations have been evaluated as described in this filing under this FCC ID with optional FCC ID VSF19782MX (portable Model Allegro MX and hand-held model TK6000). Other collocation configurations require separate evaluation. For mobile operating configurations, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in filings under the FCC ID. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. End users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported Part 15 body-worn SAR value is 0.00989 W/kg
Limited Single Modular

EAS Grant - Application YhWYxB5BJT151vZ6VLhiCQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Juniper Systems, Inc.
1132 W 1700 N P.O. Box ,
Logan, UT 84321
United States
  Date of Grant: 10/27/2008

Application Dated: 10/27/2008
 
Attention: Kent Campbell

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VSF19799AR
Name of Grantee:  Juniper Systems, Inc.
Equipment Class: Digital Transmission System
Notes: BC04 Bluetooth Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.01058  

Output power is conducted. This transmitter operates only in the grantee's handheld computer Model Archer, hand held computer TK6000 and body-worn computer Model Allegro MX. Collocated transmitter operating configurations have been evaluated as described in this filing under this FCC ID with optional FCC ID VSF19782MX (portable Model Allegro MX and hand-held model TK6000). Other collocation configurations require separate evaluation. For mobile operating configurations, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in filings under the FCC ID. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. End users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported Part 15 body-worn SAR value is 0.00989 W/kg

Limited Single Modular



TCB Grant - Application W39BV0cUYSlfV5ugwxnAYg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Northwest EMC, Inc.
22975 NW Evergreen Parkway, Suite 400
Hillsboro, OR 97124
Date of Grant: 10/14/2008

Application Dated: 10/14/2008
Juniper Systems, Inc.
1132 W 1700 N
Logan, UT 84321
 
Attention: Kent Campbell

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VSF19799AR
Name of Grantee:  Juniper Systems, Inc.
Equipment Class: Digital Transmission System
Notes: BC04
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2482.0 0.01058  

Output power is conducted. This transmitter operates only in the grantee’s handheld computer Model Archer and body-worn computer Model Allegro MX. Collocated transmitter operating configurations have been evaluated as described in this filing under this FCC ID with optional FCC ID VSF19782MX (portable – Model Allegro MX). Other collocation configurations require separate evaluation. For mobile operating configurations, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in filings under the FCC ID. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. End users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported Part 15 body-worn SAR value is 0.00989 W/kg
Limited Single Modular

EAS Grant - Application W39BV0cUYSlfV5ugwxnAYg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Juniper Systems, Inc.
1132 W 1700 N P.O. Box ,
Logan, UT 84321
United States
  Date of Grant: 10/14/2008

Application Dated: 10/14/2008
 
Attention: Kent Campbell

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VSF19799AR
Name of Grantee:  Juniper Systems, Inc.
Equipment Class: Digital Transmission System
Notes: BC04
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2482.0 0.01058  

Output power is conducted. This transmitter operates only in the grantee’s handheld computer Model Archer and body-worn computer Model Allegro MX. Collocated transmitter operating configurations have been evaluated as described in this filing under this FCC ID with optional FCC ID VSF19782MX (portable – Model Allegro MX). Other collocation configurations require separate evaluation. For mobile operating configurations, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in filings under the FCC ID. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. End users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported Part 15 body-worn SAR value is 0.00989 W/kg

Limited Single Modular



TCB Grant - Application CobqfhVOYF4ehJxaGL256g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Northwest EMC, Inc.
22975 NW Evergreen Parkway, Suite 400
Hillsboro, OR 97124
Date of Grant: 06/11/2008

Application Dated: 06/11/2008
Juniper Systems, Inc.
1132 W 1700 N
Logan, UT 84321
 
Attention: Kent Campbell

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VSF19799AR
Name of Grantee:  Juniper Systems, Inc.
Equipment Class: Digital Transmission System
Notes: BC04
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.01058  

Output power is conducted. This transmitter is approved for use only in the grantee’s hand held computer model Archer. The antenna(s) for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Limited Single Modular

EAS Grant - Application CobqfhVOYF4ehJxaGL256g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Juniper Systems, Inc.
1132 W 1700 N P.O. Box ,
Logan, UT 84321
United States
  Date of Grant: 06/11/2008

Application Dated: 06/11/2008
 
Attention: Kent Campbell

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VSF19799AR
Name of Grantee:  Juniper Systems, Inc.
Equipment Class: Digital Transmission System
Notes: BC04
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.01058  

Output power is conducted. This transmitter is approved for use only in the grantee’s hand held computer model Archer. The antenna(s) for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Limited Single Modular



Mail To: