FCC ID VSF22455

VSF-22455, VSF 22455, VSF22455, VSF224SS, V5F22455

Juniper Systems, Inc. Modem Module GSM 850/900/1800/1900MHz 22455

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: VSF22455 is VSF. The remaining characters of the FCC ID, 22455, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: Modem Module GSM 850/900/1800/1900MHz

App # Purpose Date Unique ID
1 Change in Identification 2009-09-15 NbsIUY7znEClOhAbmW/AKA==
2 Class II Permissive Change 2009-10-01 zTJLxdjHKVcWPPl7Z+gHfg==

Operating Frequencies

Device operates within approved frequencies overlapping with the following cellular bands: GSM 1900 PCS UP | LTE 2,1900 PCS UP | LTE 25,1900+ UP | LTE 35,TD PCS Lower DOWN | UMTS CH 2 UP | UMTS CH 25 UP | UMTS CH 35 DOWN |
Frequency RangePower OutputToleranceEmission DesignatorRule Parts App #
824.2-848.8 MHz1.35 Watts0.04ppm300KGXW22H 1.2
824.2-848.8 MHz1.35 Watts0.04ppm300KGXW22H 2.2
1.8502-1.9098 GHz660 mW0.042ppm300KGXW24E 1.1
1.8502-1.9098 GHz660 mW0.042ppm300KGXW24E 2.1

Exhibits

Available Exhibits

App #Document Type Submitted
Available
2 Label infoID Label/Location Info
Adobe Acrobat PDF (160 kB)
2009-10-01
2009-10-01
2 Antenna InfoOperational Description
Adobe Acrobat PDF (22 kB)
2009-10-01
2009-10-01
2 Setup PhotosTest Setup Photos
Adobe Acrobat PDF (289 kB)
2009-10-01
2009-10-01
2 External photosExternal Photos
Adobe Acrobat PDF (724 kB)
2009-10-01
2009-10-01
2 Test Plan anf RF Expo infoRF Exposure Info
Adobe Acrobat PDF (289 kB)
2009-10-01
2009-10-01
2 Test ReportTest Report
Adobe Acrobat PDF (446 kB)
2009-10-01
2009-10-01
2 KDB Enquiry and responseCover Letter(s)
Adobe Acrobat PDF (58 kB)
2009-10-01
2009-10-01
2 Agent AuthorizationCover Letter(s)
Adobe Acrobat PDF (285 kB)
2009-10-01
2009-10-01
2 Cover LetterCover Letter(s)
Adobe Acrobat PDF (72 kB)
2009-10-01
2009-10-01
1 Label locationID Label/Location Info
Adobe Acrobat PDF (226 kB)
2009-09-14
2009-09-15
1 External PhotosExternal Photos
Adobe Acrobat PDF (1462 kB)
2009-09-14
2009-09-15
1 Label InfoID Label/Location Info
Adobe Acrobat PDF (226 kB)
2009-09-14
2009-09-15
1 letter of agencyCover Letter(s)
Adobe Acrobat PDF (285 kB)
2009-09-14
2009-09-15
1 Authorization of changeCover Letter(s)
Adobe Acrobat PDF (153 kB)
2009-09-14
2009-09-15
1 Change ID request letterCover Letter(s)
Adobe Acrobat PDF (354 kB)
2009-09-14
2009-09-15

APP # 2 (2009-10-01)

App # Document Type Submitted
Available
2 Label info ID Label/Location Info
Adobe Acrobat PDF (160 kB)
2009-10-01 00:00:00
2009-10-01 00:00:00
2 Antenna Info Operational Description
Adobe Acrobat PDF (22 kB)
2009-10-01 00:00:00
2009-10-01 00:00:00
2 Setup Photos Test Setup Photos
Adobe Acrobat PDF (289 kB)
2009-10-01 00:00:00
2009-10-01 00:00:00
2 External photos External Photos
Adobe Acrobat PDF (724 kB)
2009-10-01 00:00:00
2009-10-01 00:00:00
2 Test Plan anf RF Expo info RF Exposure Info
Adobe Acrobat PDF (289 kB)
2009-10-01 00:00:00
2009-10-01 00:00:00
2 Test Report Test Report
Adobe Acrobat PDF (446 kB)
2009-10-01 00:00:00
2009-10-01 00:00:00
2 KDB Enquiry and response Cover Letter(s)
Adobe Acrobat PDF (58 kB)
2009-10-01 00:00:00
2009-10-01 00:00:00
2 Agent Authorization Cover Letter(s)
Adobe Acrobat PDF (285 kB)
2009-10-01 00:00:00
2009-10-01 00:00:00
2 Cover Letter Cover Letter(s)
Adobe Acrobat PDF (72 kB)
2009-10-01 00:00:00
2009-10-01 00:00:00

APP # 1 (2009-09-15)

App # Document Type Submitted
Available
1 Label location ID Label/Location Info
Adobe Acrobat PDF (226 kB)
2009-09-14 00:00:00
2009-09-15 00:00:00
1 External Photos External Photos
Adobe Acrobat PDF (1462 kB)
2009-09-14 00:00:00
2009-09-15 00:00:00
1 Label Info ID Label/Location Info
Adobe Acrobat PDF (226 kB)
2009-09-14 00:00:00
2009-09-15 00:00:00
1 letter of agency Cover Letter(s)
Adobe Acrobat PDF (285 kB)
2009-09-14 00:00:00
2009-09-15 00:00:00
1 Authorization of change Cover Letter(s)
Adobe Acrobat PDF (153 kB)
2009-09-14 00:00:00
2009-09-15 00:00:00
1 Change ID request letter Cover Letter(s)
Adobe Acrobat PDF (354 kB)
2009-09-14 00:00:00
2009-09-15 00:00:00

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Juniper Systems, Inc.
FCC Registration Number (FRN): 0017084591
Alphanumeric FCC ID: VSF22455
Unique Application Identifier: NbsIUY7znEClOhAbmW/AKA==
Line one: 1132 W 1700 N
City: Logan
State: Utah
Country: United States
Zip Code: 84321

TCB Information
TCB Application Email Address: tcb@elliottlabs.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: VSF
Product Code: 22455

Person at the applicant's address to receive grant or for contact
Name: Kent Campbell
Telephone Number: 435-753-1881 Extension:
Fax Number: 435-774-8990
Email: kent@junipersys.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Modem Module GSM 850/900/1800/1900MHz

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Change in identification of presently authorized equipment. Original FCC ID: AU792U05E06800 Grant Date: 08/18/2005

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   National Technical Systems - Silicon Valley
First Name:   David
Last Name:   Bare
Telephone Number: 510-578-3500 Extension:
Fax Number:  510 578 3510
E-mail:  david.bare@nts.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power Output listed is conducted. The antenna gain, including cable loss, must not exceed 4.81dBi 1900 MHz / 0.46 dBd at 850 MHz for mobile operating configurations and 8.81dBi at 1900 MHz / 1,13 dBd at 850 MHz for fixed-mounted operations, as defined in 2.1091 and 1.1307 of the rules for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The device contains GSM 900 MHz and GSM 1800 MHz functions that are not operational in U.S. Territories.The final product operating with this transmitter must include operating instructions and applicable warnings, as described in this filing, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of the specific requirements.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  David Guidotti
Title of authorized signature:  Senoir Tech writter

Complete items below if agent signs the application:

Firm Name:  Elliott Laboratories
Name:  David David David
Line 1:  David
Line 2:  David
P.O. Box:  David
City:  David
State:  David
Country:  David
Zip Code:  David
Telephone Number:  408-245-7800
Fax Number:  408-245-3499
E-mail:  tcb@elliottlabs.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Juniper Systems, Inc.
FCC Registration Number (FRN): 0017084591
Alphanumeric FCC ID: VSF22455
Unique Application Identifier: zTJLxdjHKVcWPPl7Z+gHfg==
Line one: 1132 W 1700 N
City: Logan
State: Utah
Country: United States
Zip Code: 84321

TCB Information
TCB Application Email Address: tcb@elliottlabs.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: VSF
Product Code: 22455

Person at the applicant's address to receive grant or for contact
Name: Kent Campbell
Telephone Number: 435-753-1881 Extension:
Fax Number: 435-774-8990
Email: kent@junipersys.com

Technical Contact
Firm Name:
Elliott Laboratories
First Name: Mark
Last Name: Briggs
City: Sunnyvale
Country:
United States
Zip Code: 94085
Telephone Number:
408-245-7800

Extension:
Fax Number: 408-245-3499
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Modem Module GSM 850/900/1800/1900MHz

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  Yes

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   Yes


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   National Technical Systems - Silicon Valley
First Name:   David
Last Name:   Bare
Telephone Number: 510-578-3500 Extension:
Fax Number:  510 578 3510
E-mail:  david.bare@nts.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power output listed is conducted. The antenna gain, including cable loss, must not exceed 4.81dBi at 1900 MHz / 0.46 dBd at 850 MHz for mobile operating configurations and 8.81dBi at 1900 MHz / 1.13 dBd at 850 MHz for fixed-mounted operations, as defined in 2.1091 and 1.1307 of the rules for satisfying RF exposure compliance. For mobile operating configurations, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Collocated transmitter and hand-held operating configuration has been evaluated as described in the filing. The maximum output power for this hand-held collocation configuration is 0.468W ERP at 850 MHz / 0.166W EIRP at 1900 MHz. The device contains GSM 900 MHz and GSM 1800 MHz functions that are not operational in U.S. Territories. The final product operating with this transmitter must include operating instructions and applicable warnings, as described in this filing, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of the specific requirements.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Mark Briggs
Title of authorized signature:  Staff Engineer

Complete items below if agent signs the application:

Firm Name:  Elliott Laboratories
Name:  Mark Mark Mark
Line 1:  Mark
Line 2:  Mark
P.O. Box:  Mark
City:  Mark
State:  Mark
Country:  Mark
Zip Code:  Mark
Telephone Number:  408-245-7800
Fax Number:  408-245-3499
E-mail:  tcb@elliottlabs.com

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems - Silicon Valley
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 09/15/2009

Application Dated: 09/14/2009
Juniper Systems, Inc.
1132 W 1700 N
Logan, UT 84321
 
Attention: Kent Campbell

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VSF22455
Name of Grantee:  Juniper Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Modem Module GSM 850/900/1800/1900MHz
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.66 0.042  PM 300KGXW
22H 824.2  -  848.8 1.35 0.04  PM 300KGXW

Power Output listed is conducted. The antenna gain, including cable loss, must not exceed 4.81dBi 1900 MHz / 0.46 dBd at 850 MHz for mobile operating configurations and 8.81dBi at 1900 MHz / 1,13 dBd at 850 MHz for fixed-mounted operations, as defined in 2.1091 and 1.1307 of the rules for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The device contains GSM 900 MHz and GSM 1800 MHz functions that are not operational in U.S. Territories.The final product operating with this transmitter must include operating instructions and applicable warnings, as described in this filing, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of the specific requirements.

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Juniper Systems, Inc.
1132 W 1700 N P.O. Box ,
Logan, UT 84321
United States
  Date of Grant: 09/15/2009

Application Dated: 09/14/2009
 
Attention: Kent Campbell

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VSF22455
Name of Grantee:  Juniper Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Modem Module GSM 850/900/1800/1900MHz
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.66 0.042  PM 300KGXW
22H 824.2  -  848.8 1.35 0.04  PM 300KGXW

Power Output listed is conducted. The antenna gain, including cable loss, must not exceed 4.81dBi 1900 MHz / 0.46 dBd at 850 MHz for mobile operating configurations and 8.81dBi at 1900 MHz / 1,13 dBd at 850 MHz for fixed-mounted operations, as defined in 2.1091 and 1.1307 of the rules for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The device contains GSM 900 MHz and GSM 1800 MHz functions that are not operational in U.S. Territories.The final product operating with this transmitter must include operating instructions and applicable warnings, as described in this filing, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of the specific requirements.



Mail To:


EA212079
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems - Silicon Valley
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 10/01/2009

Application Dated: 10/01/2009
Juniper Systems, Inc.
1132 W 1700 N
Logan, UT 84321
 
Attention: Kent Campbell

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VSF22455
Name of Grantee:  Juniper Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Modem Module GSM 850/900/1800/1900MHz
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.66 0.042  PM 300KGXW
22H 824.2  -  848.8 1.35 0.04  PM 300KGXW

Power output listed is conducted. The antenna gain, including cable loss, must not exceed 4.81dBi at 1900 MHz / 0.46 dBd at 850 MHz for mobile operating configurations and 8.81dBi at 1900 MHz / 1.13 dBd at 850 MHz for fixed-mounted operations, as defined in 2.1091 and 1.1307 of the rules for satisfying RF exposure compliance. For mobile operating configurations, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Collocated transmitter and hand-held operating configuration has been evaluated as described in the filing. The maximum output power for this hand-held collocation configuration is 0.468W ERP at 850 MHz / 0.166W EIRP at 1900 MHz. The device contains GSM 900 MHz and GSM 1800 MHz functions that are not operational in U.S. Territories. The final product operating with this transmitter must include operating instructions and applicable warnings, as described in this filing, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of the specific requirements.

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Juniper Systems, Inc.
1132 W 1700 N P.O. Box ,
Logan, UT 84321
United States
  Date of Grant: 10/01/2009

Application Dated: 10/01/2009
 
Attention: Kent Campbell

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VSF22455
Name of Grantee:  Juniper Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Modem Module GSM 850/900/1800/1900MHz
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.66 0.042  PM 300KGXW
22H 824.2  -  848.8 1.35 0.04  PM 300KGXW

Power output listed is conducted. The antenna gain, including cable loss, must not exceed 4.81dBi at 1900 MHz / 0.46 dBd at 850 MHz for mobile operating configurations and 8.81dBi at 1900 MHz / 1.13 dBd at 850 MHz for fixed-mounted operations, as defined in 2.1091 and 1.1307 of the rules for satisfying RF exposure compliance. For mobile operating configurations, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Collocated transmitter and hand-held operating configuration has been evaluated as described in the filing. The maximum output power for this hand-held collocation configuration is 0.468W ERP at 850 MHz / 0.166W EIRP at 1900 MHz. The device contains GSM 900 MHz and GSM 1800 MHz functions that are not operational in U.S. Territories. The final product operating with this transmitter must include operating instructions and applicable warnings, as described in this filing, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of the specific requirements.



Mail To:


EA322882

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details