FCC ID VSF24770
Dual-Band CDMA-2000/EV-DO RF Module
by Juniper Systems, Inc.
Grantee Code: VSF Product Code: 24770
Latest application date: 2015-07-13
FCC ID Device Details
| FCC ID | VSF24770 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | VSF |
| Product Code | 24770 |
| Applicant Business | Juniper Systems, Inc. 🇺🇸 |
| Related Domains |  junipersys.com |
| Equipment Class | Dual-Band CDMA-2000/EV-DO RF Module |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 817.9-823.1 MHz | Class II permissive change or modification of presently authorized equipment | 2015-07-13 |
| 817.9-823.1 MHz | Change in identification of presently authorized equipment. Original FCC ID: QIPPVS8 Grant Date: 07/03/2012 | 2015-06-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2015-07-13 | PDF 1.1 MB |
| External Photos | External Photos | 2015-07-13 | PDF 1.1 MB |
| External Photos | External Photos | 2015-06-29 | PDF 199.1 KB |
| Label Information | ID Label/Location Info | 2015-06-29 | PDF 94 KB |
| Agency Agreement | Cover Letter(s) | 2015-07-13 | PDF 201.5 KB |
| FCC Cover Letter | Cover Letter(s) | 2015-07-13 | PDF 21 KB |
| Change in ID Authorization | Cover Letter(s) | 2015-06-29 | PDF 301.5 KB |
| Change in ID Request | Cover Letter(s) | 2015-06-29 | PDF 189.7 KB |
| SAR Report | RF Exposure Info | 2015-07-13 | PDF 4.4 MB |
Application Information
| Application ID | HfEjealB6MRy08Zzpe2+3g== |
|---|---|
| Final Action Date | 2015-07-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0017084591 |
| Model | 24770 |
| Frequency Range | 817.9-823.1 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | Dual-Band CDMA-2000/EV-DO RF Module |
| Responsible Party | Gary D Spence, Chief Technology Officer, gary@junipersys.com , 435-753-1881 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc. |
| Test Firm | Randy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com  , 770-831-8048 |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Licensed Modular Transmitter. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. Approval is limited to the maximum antenna gain 11.3 dBi (850 MHz), 4.4 dBi (1900 MHz). OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change to address integration into Archer2 host as described in this filing. Device co-located with FCC ID: VSF23545. The highest reported SAR for body-worn accessory and simultaneous transmission exposure conditions are 1.03 W/kg and 1.53 W/kg respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| HfEjealB6MRy08Zzpe2+3g== | 2015-07-13 | Class II permissive change or modification of presently authorized equipment |
| MLdytzHPl11N0xFoicBYlA== | 2015-06-29 | Change in identification of presently authorized equipment. Original FCC ID: QIPPVS8 Grant Date: 07/03/2012 |
| DUXwtcdwEq6Ey+b2KbmTCw== | 2015-06-29 | Change in identification of presently authorized equipment. Original FCC ID: QIPPVS8 Grant Date: 07/03/2012 |
Equipment Authorization
Grants
TCB Grant - Application MLdytzHPl11N0xFoicBYlA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 06/29/2015 Application Dated: 06/29/2015 |
| Juniper Systems, Inc. |
| 1132 W 1700 N |
| Logan, UT 84321 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF24770 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Dual-Band CDMA-2000/EV-DO RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
EAS Grant - Application MLdytzHPl11N0xFoicBYlA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Systems, Inc. 1132 W 1700 N Logan, UT 84321 United States |
Date of Grant: 06/29/2015 Application Dated: 06/29/2015 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF24770 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Dual-Band CDMA-2000/EV-DO RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 07/13/2015 Application Dated: 07/13/2015 |
| Juniper Systems, Inc. |
| 1132 W 1700 N |
| Logan, UT 84321 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF24770 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Dual-Band CDMA-2000/EV-DO RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.3 | 0.851 | 2.5 PM | 1M37F9W | |
| 24E | 1851.25 - 1908.75 | 0.741 | 2.5 PM | 1M38F9W | |
| 90 | 817.9 - 823.1 | 0.281 | 2.5 PM | 1M28F9W |
| Licensed Modular Transmitter. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. Approval is limited to the maximum antenna gain 11.3 dBi (850 MHz), 4.4 dBi (1900 MHz). OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change to address integration into Archer2 host as described in this filing. Device co-located with FCC ID: VSF23545. The highest reported SAR for body-worn accessory and simultaneous transmission exposure conditions are 1.03 W/kg and 1.53 W/kg respectively. |
EAS Grant - Application HfEjealB6MRy08Zzpe2+3g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Systems, Inc. 1132 W 1700 N Logan, UT 84321 United States |
Date of Grant: 07/13/2015 Application Dated: 07/13/2015 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF24770 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Dual-Band CDMA-2000/EV-DO RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.3 | 0.851 | 2.5 PM | 1M37F9W | |
| 24E | 1851.25 - 1908.75 | 0.741 | 2.5 PM | 1M38F9W | |
| 90 | 817.9 - 823.1 | 0.281 | 2.5 PM | 1M28F9W |
| Licensed Modular Transmitter. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. Approval is limited to the maximum antenna gain 11.3 dBi (850 MHz), 4.4 dBi (1900 MHz). OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change to address integration into Archer2 host as described in this filing. Device co-located with FCC ID: VSF23545. The highest reported SAR for body-worn accessory and simultaneous transmission exposure conditions are 1.03 W/kg and 1.53 W/kg respectively. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 06/29/2015 Application Dated: 06/29/2015 |
| Juniper Systems, Inc. |
| 1132 W 1700 N |
| Logan, UT 84321 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF24770 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Dual-Band CDMA-2000/EV-DO RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.3 | 0.851 | 2.5 PM | 1M37F9W | |
| 24E | 1851.25 - 1908.75 | 0.741 | 2.5 PM | 1M38F9W | |
| 90 | 817.9 - 823.1 | 0.281 | 2.5 PM | 1M28F9W |
| Licensed Modular Transmitter. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. Approval is limited to the maximum antenna gain 11.3 dBi (850 MHz), 4.4 dBi (1900 MHz). OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application DUXwtcdwEq6Ey+b2KbmTCw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Systems, Inc. 1132 W 1700 N Logan, UT 84321 United States |
Date of Grant: 06/29/2015 Application Dated: 06/29/2015 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF24770 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Dual-Band CDMA-2000/EV-DO RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.3 | 0.851 | 2.5 PM | 1M37F9W | |
| 24E | 1851.25 - 1908.75 | 0.741 | 2.5 PM | 1M38F9W | |
| 90 | 817.9 - 823.1 | 0.281 | 2.5 PM | 1M28F9W |
| Licensed Modular Transmitter. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. Approval is limited to the maximum antenna gain 11.3 dBi (850 MHz), 4.4 dBi (1900 MHz). OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: |