FCC ID VSF26593
RFID Module
by Juniper Systems, Inc.
Grantee Code: VSF Product Code: 26593
Latest application date: 2017-01-13
Device Images
FCC ID Device Details
| FCC ID | VSF26593 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | VSF |
| Product Code | 26593 |
| Applicant Business | Juniper Systems, Inc. 🇺🇸 |
| Related Domains |  junipersys.com |
| Equipment Class | RFID Module |
| Test Firm | TUV SUD America, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 917.5-922.5 MHz | Class II permissive change or modification of presently authorized equipment | 2017-01-13 |
| 917.5-922.5 MHz | Change in identification of presently authorized equipment. Original FCC ID: QV5MERCURY6E-M Grant Date: 11/30/2012 | 2016-12-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2017-01-13 | PDF 924.4 KB |
| External Photos | External Photos | 2016-12-09 | PDF 2.1 MB |
| Label Information | ID Label/Location Info | 2016-12-09 | PDF 168.4 KB |
| Test Setup Photos | Test Setup Photos | 2017-01-13 | PDF 257.7 KB |
| Test Report | Test Report | 2017-01-13 | PDF 108.4 KB |
| Agency Agreement | Cover Letter(s) | 2017-01-13 | PDF 327.7 KB |
| FCC Cover Letter | Cover Letter(s) | 2017-01-13 | PDF 17.2 KB |
| Change in ID Authorization | Cover Letter(s) | 2016-12-09 | PDF 131.9 KB |
| Change in ID Request | Cover Letter(s) | 2016-12-09 | PDF 287.8 KB |
| SAR Report 1 of 2 | RF Exposure Info | 2017-01-13 | PDF 3.5 MB |
| SAR Report 2 of 2 | RF Exposure Info | 2017-01-13 | PDF 4 MB |
Application Information
| Application ID | 9/EfznRkwpzVyUKboIETPQ== |
|---|---|
| Final Action Date | 2017-01-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0017084591 |
| Model | 26593 |
| Frequency Range | 917.5-922.5 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RFID Module |
| Responsible Party | Gary D Spence, Chief Technology Officer, gary@junipersys.com , 435-753-1881 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc. |
| Test Firm | Sam Wismer, TUV SUD America, Inc., swismer@tuvam.com  , 770-831-8048 |
| TCB Email | jwoods@acstestlab.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Class II permissive change as described in this filing. Class II Change to address addition of new antenna type and integration into the MS2GR and MS2GCR portable hosts as described in this filing. Device is co-located with FCC ID VSFMS2 in the MS2GR host and FCC ID's VSFMS2 and VSF25271 in the MS2GCR host. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 9/EfznRkwpzVyUKboIETPQ== | 2017-01-13 | Class II permissive change or modification of presently authorized equipment |
| faIvpTROOGyahNkCoR+Mpw== | 2016-12-09 | Change in identification of presently authorized equipment. Original FCC ID: QV5MERCURY6E-M Grant Date: 11/30/2012 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 917.5-922.5 MHz | 0.6887000 | 15C |
Grants
TCB Grant - Application faIvpTROOGyahNkCoR+Mpw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 12/09/2016 Application Dated: 12/09/2016 |
| Juniper Systems, Inc. |
| 1132 W 1700 N |
| Logan, UT 84321 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF26593 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 917.5 - 922.5 | 0.6887 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Class II permissive change as described in this filing. |
EAS Grant - Application faIvpTROOGyahNkCoR+Mpw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Systems, Inc. 1132 W 1700 N Logan, UT 84321 United States |
Date of Grant: 12/09/2016 Application Dated: 12/09/2016 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF26593 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 917.5 - 922.5 | 0.6887 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Class II permissive change as described in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 01/13/2017 Application Dated: 01/12/2017 |
| Juniper Systems, Inc. |
| 1132 W 1700 N |
| Logan, UT 84321 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF26593 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 917.5 - 922.5 | 0.6887 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Class II permissive change as described in this filing. Class II Change to address addition of new antenna type and integration into the MS2GR and MS2GCR portable hosts as described in this filing. Device is co-located with FCC ID VSFMS2 in the MS2GR host and FCC ID's VSFMS2 and VSF25271 in the MS2GCR host. |
EAS Grant - Application 9/EfznRkwpzVyUKboIETPQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Systems, Inc. 1132 W 1700 N Logan, UT 84321 United States |
Date of Grant: 01/13/2017 Application Dated: 01/12/2017 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF26593 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 917.5 - 922.5 | 0.6887 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Class II permissive change as described in this filing. Class II Change to address addition of new antenna type and integration into the MS2GR and MS2GCR portable hosts as described in this filing. Device is co-located with FCC ID VSFMS2 in the MS2GR host and FCC ID's VSFMS2 and VSF25271 in the MS2GCR host. |
| Mail To: |