1. FCC ID
  2. VSF
  3. VSF27582

FCC ID VSF27582

Radio Module

by Juniper Systems, Inc.

Grantee Code: VSF   Product Code: 27582
Latest application date: 2019-03-15

FCC ID Device Details

FCC IDVSF27582
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeVSF
Product Code27582
Applicant BusinessJuniper Systems, Inc. 🇺🇸
Related Domains junipersys.com
Equipment ClassRadio Module
Test FirmBureau Veritas Consumer Products Services, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
699-716 MHzClass II permissive change or modification of presently authorized equipment2019-03-15
699-716 MHzChange in identification of presently authorized equipment. Original FCC ID: N7NWP76C Grant Date: 07/17/20172018-12-14

Exhibits

DocumentTypeAvailableFile
Host Internal PhotosInternal Photos2019-03-15PDF 820.3 KB
Internal PhotosInternal Photos2018-12-14PDF 228.3 KB
Host External PhotosExternal Photos2019-03-15PDF 538.9 KB
Module External PhotosExternal Photos2019-03-15PDF 243.6 KB
External Photos BottomExternal Photos2018-12-14PDF 112.5 KB
External Photos TopExternal Photos2018-12-14PDF 70.3 KB
Product LabelID Label/Location Info2019-03-15PDF 18.8 KB
Test Setup PhotosTest Setup Photos2019-03-15PDF 915.3 KB
Cellular Test ReportTest Report2019-03-15PDF 1.2 MB
Co-location Test ReportTest Report2019-03-15PDF 794.2 KB
DSS Test ReportTest Report2019-03-15PDF 4.6 MB
DTS Test ReportTest Report2019-03-15PDF 1.1 MB
SAR Test Report Part 1RF Exposure Info2019-03-15PDF 4.1 MB
SAR Test Report Part 2RF Exposure Info2019-03-15PDF 4 MB
Class II Permissive Change LetterCover Letter(s)2019-03-15PDF 35.7 KB
Product Certification Representative Auth LetterCover Letter(s)2019-03-15PDF 39.8 KB
Change of ID Authorization LetterCover Letter(s)2018-12-14PDF 81.2 KB
Change of ID Request LetterCover Letter(s)2018-12-14PDF 478 KB
Product Certification Representative Auth LetterCover Letter(s)2018-12-14PDF 30 KB

Application Information

Application ID6YRovxpupNeQWnoLMy2N5g==
Final Action Date2019-03-15
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0017084591
Model27582
Frequency Range699-716 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionRadio Module
Responsible PartyGary D Spence, Chief Technology Officer, gary@junipersys.com , 435-753-1881
Test FirmSarb Shelopal, Bureau Veritas Consumer Products Services, Inc., Sarbjit.Shelopal@bureauveritas.com , +1 925 963 4420
TCB Emailtcb@siemic.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC to add portable host AG3. End-users must be provided with operating instructions for satisfying RF exposure compliance. This host device is evaluated for simultaneous transmission with both Licensed and Unlicensed transmitters as identified within this filing. The highest reported SAR for body-worn and simultaneous transmission are 1.38 W/kg and 1.78 W/kg, respectively. The Simultaneous Separation Ratio is 0.01. Original Grant Comments: Power out is conducted at the antenna terminal. Single Modular Approval. The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24 and 27. The Grantee is responsible for providing the documentation required for modular use and this module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4 and 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12.

Applications

Application IDDatePurpose
6YRovxpupNeQWnoLMy2N5g==2019-03-15Class II permissive change or modification of presently authorized equipment
Ffsd0QdjmgSFFskI6IoM6Q==2018-12-14Change in identification of presently authorized equipment. Original FCC ID: N7NWP76C Grant Date: 07/17/2017

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
699-716 MHz0.22.5ppm2M69W7D27BC
699-716 MHz0.2252.5ppm8M95G7D27BC
699-716 MHz0.1982.5ppm8M95W7D27BC
824-849 MHz0.2322.5ppm4M13G7D22HBC
824-849 MHz0.2342.5ppm8M95G7D22HBC
824-849 MHz0.2022.5ppm2M68W7D22HBC
824-849 MHz0.1892.5ppm8M94W7D22HBC
1710-1755 MHz0.2162.5ppm17M9G7D27BC
1710-1755 MHz0.2052.5ppm17M9W7D27BC
1710-1755 MHz0.2382.5ppm4M12G7D27BC
1850-1910 MHz0.2182.5ppm4M12G7D24EBC
1850-1910 MHz0.2092.5ppm17M8G7D24EBC
1850-1910 MHz0.1962.5ppm17M8W7D24EBC

Grants

TCB Grant - Application Ffsd0QdjmgSFFskI6IoM6Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 12/14/2018

Application Dated: 12/14/2018
Juniper Systems, Inc.
1132 W 1700 N
Logan, UT 84321
 
Attention: Gary Spence , Chief Technology Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VSF27582
Name of Grantee:  Juniper Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Radio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 27 699.0  -  716.0 0.23 2.5  PM 2M69G7D
BC 27 699.0  -  716.0 0.2 2.5  PM 2M69W7D
BC 27 699.0  -  716.0 0.225 2.5  PM 8M95G7D
BC 27 699.0  -  716.0 0.198 2.5  PM 8M95W7D
BC 22H 824.0  -  849.0 0.232 2.5  PM 4M13G7D
BC 22H 824.0  -  849.0 0.234 2.5  PM 8M95G7D
BC 22H 824.0  -  849.0 0.202 2.5  PM 2M68W7D
BC 22H 824.0  -  849.0 0.189 2.5  PM 8M94W7D
BC 27 1710.0  -  1755.0 0.238 2.5  PM 4M12G7D
BC 27 1710.0  -  1755.0 0.216 2.5  PM 17M9G7D
BC 27 1710.0  -  1755.0 0.205 2.5  PM 17M9W7D
BC 24E 1850.0  -  1910.0 0.218 2.5  PM 4M12G7D
BC 24E 1850.0  -  1910.0 0.209 2.5  PM 17M8G7D
BC 24E 1850.0  -  1910.0 0.196 2.5  PM 17M8W7D

Power out is conducted at the antenna terminal. Single Modular Approval. The device has been certified for mobile use and any co-location must be done through the use of FCC multitransmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24 and 27. The Grantee is responsible for providing the documentation required for modular use and this module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4 and 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application Ffsd0QdjmgSFFskI6IoM6Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Juniper Systems, Inc.
1132 W 1700 N
Logan, UT 84321
United States 		  Date of Grant: 12/14/2018

Application Dated: 12/14/2018
 
Attention: Gary Spence , Chief Technology Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VSF27582
Name of Grantee:  Juniper Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Radio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 27 699.0  -  716.0 0.23 2.5  PM 2M69G7D
BC 27 699.0  -  716.0 0.2 2.5  PM 2M69W7D
BC 27 699.0  -  716.0 0.225 2.5  PM 8M95G7D
BC 27 699.0  -  716.0 0.198 2.5  PM 8M95W7D
BC 22H 824.0  -  849.0 0.232 2.5  PM 4M13G7D
BC 22H 824.0  -  849.0 0.234 2.5  PM 8M95G7D
BC 22H 824.0  -  849.0 0.202 2.5  PM 2M68W7D
BC 22H 824.0  -  849.0 0.189 2.5  PM 8M94W7D
BC 27 1710.0  -  1755.0 0.238 2.5  PM 4M12G7D
BC 27 1710.0  -  1755.0 0.216 2.5  PM 17M9G7D
BC 27 1710.0  -  1755.0 0.205 2.5  PM 17M9W7D
BC 24E 1850.0  -  1910.0 0.218 2.5  PM 4M12G7D
BC 24E 1850.0  -  1910.0 0.209 2.5  PM 17M8G7D
BC 24E 1850.0  -  1910.0 0.196 2.5  PM 17M8W7D

Power out is conducted at the antenna terminal. Single Modular Approval. The device has been certified for mobile use and any co-location must be done through the use of FCC multitransmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24 and 27. The Grantee is responsible for providing the documentation required for modular use and this module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4 and 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application 6YRovxpupNeQWnoLMy2N5g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 03/15/2019

Application Dated: 03/15/2019
Juniper Systems, Inc.
1132 W 1700 N
Logan, UT 84321
 
Attention: Gary Spence , Chief Technology Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VSF27582
Name of Grantee:  Juniper Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Radio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 27 699.0  -  716.0 0.23 2.5  PM 2M69G7D
BC 27 699.0  -  716.0 0.2 2.5  PM 2M69W7D
BC 27 699.0  -  716.0 0.225 2.5  PM 8M95G7D
BC 27 699.0  -  716.0 0.198 2.5  PM 8M95W7D
BC 22H 824.0  -  849.0 0.232 2.5  PM 4M13G7D
BC 22H 824.0  -  849.0 0.234 2.5  PM 8M95G7D
BC 22H 824.0  -  849.0 0.202 2.5  PM 2M68W7D
BC 22H 824.0  -  849.0 0.189 2.5  PM 8M94W7D
BC 27 1710.0  -  1755.0 0.238 2.5  PM 4M12G7D
BC 27 1710.0  -  1755.0 0.216 2.5  PM 17M9G7D
BC 27 1710.0  -  1755.0 0.205 2.5  PM 17M9W7D
BC 24E 1850.0  -  1910.0 0.218 2.5  PM 4M12G7D
BC 24E 1850.0  -  1910.0 0.209 2.5  PM 17M8G7D
BC 24E 1850.0  -  1910.0 0.196 2.5  PM 17M8W7D

C2PC to add portable host AG3. End-users must be provided with operating instructions for satisfying RF exposure compliance. This host device is evaluated for simultaneous transmission with both Licensed and Unlicensed transmitters as identified within this filing. The highest reported SAR for body-worn and simultaneous transmission are 1.38 W/kg and 1.78 W/kg, respectively. The Simultaneous Separation Ratio is 0.01.

Original Grant Comments: Power out is conducted at the antenna terminal. Single Modular Approval. The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24 and 27. The Grantee is responsible for providing the documentation required for modular use and this module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4 and 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application 6YRovxpupNeQWnoLMy2N5g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Juniper Systems, Inc.
1132 W 1700 N
Logan, UT 84321
United States 		  Date of Grant: 03/15/2019

Application Dated: 03/15/2019
 
Attention: Gary Spence , Chief Technology Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VSF27582
Name of Grantee:  Juniper Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Radio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 27 699.0  -  716.0 0.23 2.5  PM 2M69G7D
BC 27 699.0  -  716.0 0.2 2.5  PM 2M69W7D
BC 27 699.0  -  716.0 0.225 2.5  PM 8M95G7D
BC 27 699.0  -  716.0 0.198 2.5  PM 8M95W7D
BC 22H 824.0  -  849.0 0.232 2.5  PM 4M13G7D
BC 22H 824.0  -  849.0 0.234 2.5  PM 8M95G7D
BC 22H 824.0  -  849.0 0.202 2.5  PM 2M68W7D
BC 22H 824.0  -  849.0 0.189 2.5  PM 8M94W7D
BC 27 1710.0  -  1755.0 0.238 2.5  PM 4M12G7D
BC 27 1710.0  -  1755.0 0.216 2.5  PM 17M9G7D
BC 27 1710.0  -  1755.0 0.205 2.5  PM 17M9W7D
BC 24E 1850.0  -  1910.0 0.218 2.5  PM 4M12G7D
BC 24E 1850.0  -  1910.0 0.209 2.5  PM 17M8G7D
BC 24E 1850.0  -  1910.0 0.196 2.5  PM 17M8W7D

C2PC to add portable host AG3. End-users must be provided with operating instructions for satisfying RF exposure compliance. This host device is evaluated for simultaneous transmission with both Licensed and Unlicensed transmitters as identified within this filing. The highest reported SAR for body-worn and simultaneous transmission are 1.38 W/kg and 1.78 W/kg, respectively. The Simultaneous Separation Ratio is 0.01.

Original Grant Comments: Power out is conducted at the antenna terminal. Single Modular Approval. The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24 and 27. The Grantee is responsible for providing the documentation required for modular use and this module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4 and 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To: