FCC ID VSF30805
Dual Band Wireless-AC 9260
by Juniper Systems, Inc.
Grantee Code: VSF Product Code: 30805
Latest application date: 2022-06-29
FCC ID Device Details
| FCC ID | VSF30805 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | VSF |
| Product Code | 30805 |
| Applicant Business | Juniper Systems, Inc. 🇺🇸 |
| Related Domains |  junipersys.com |
| Equipment Class | Dual Band Wireless-AC 9260 |
| Test Firm | CETECOM Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-06-29 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-06-29 |
| 5775 MHz | Class II permissive change or modification of presently authorized equipment | 2022-06-29 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD99260D2L Grant Date: 02/05/2019 | 2022-05-27 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD99260D2L Grant Date: 02/05/2019 | 2022-05-27 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD99260D2L Grant Date: 02/05/2019 | 2022-05-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| 9260D2WL- Expho | External Photos | 2022-05-27 | PDF 1.4 MB |
| 9260D2WL- Label Here | ID Label/Location Info | 2022-05-27 | PDF 512.7 KB |
| 9260D2WL- Label_0525 | ID Label/Location Info | 2022-05-27 | PDF 54.2 KB |
| Test setup Photos | Test Setup Photos | 2022-06-29 | PDF 3.9 MB |
| NII Report Part 1 | Test Report | 2022-06-29 | PDF 4 MB |
| NII Report Part 2 | Test Report | 2022-06-29 | PDF 3.5 MB |
| SAR Test Report Part 1 | RF Exposure Info | 2022-06-29 | PDF 2 MB |
| Sar Test Report Part 2 | RF Exposure Info | 2022-06-29 | PDF 4.5 MB |
| Sar Test Report part 1 | RF Exposure Info | 2022-06-29 | PDF 2 MB |
| Sar Test Report part 2 | RF Exposure Info | 2022-06-29 | PDF 4.5 MB |
| Sar Test report part 1 | RF Exposure Info | 2022-06-29 | PDF 2 MB |
| Sar Test report part 2 | RF Exposure Info | 2022-06-29 | PDF 4.5 MB |
| Test Report BLE | Test Report | 2022-06-29 | PDF 2.1 MB |
| Test Report WiFi 2.4Ghz | Test Report | 2022-06-29 | PDF 2 MB |
| Test report Bluetooth | Test Report | 2022-06-29 | PDF 1.3 MB |
| Test report co transmission part1 | Test Report | 2022-06-29 | PDF 5 MB |
| Test report co transmission part2 | Test Report | 2022-06-29 | PDF 5 MB |
| Test report co transmission part3 | Test Report | 2022-06-29 | PDF 5 MB |
| Test report co transmission part4 | Test Report | 2022-06-29 | PDF 4.9 MB |
| Test report co transmission part5 | Test Report | 2022-06-29 | PDF 289.4 KB |
| LOA and Anti drug | Attestation Statements | 2022-06-29 | PDF 719.8 KB |
| LOA and anti Drug | Attestation Statements | 2022-06-29 | PDF 719.8 KB |
| Cover Letter C2PC | Cover Letter(s) | 2022-06-29 | PDF 461.2 KB |
| 9260D2WL - Declaration letter for electrically identical_signed | Cover Letter(s) | 2022-05-27 | PDF 452.2 KB |
| 9260D2WL - Declaration of authorization_signed | Cover Letter(s) | 2022-05-27 | PDF 427.1 KB |
| FCC Auth Ltr Change of ID_9260D2WL_Juniper System_VSF30805 | Cover Letter(s) | 2022-05-27 | PDF 87.4 KB |
Application Information
| Application ID | lasiu+b9siTuwWR1UsRTwQ== |
|---|---|
| Final Action Date | 2022-06-29 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0017084591 |
| Model | 30805 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Dual Band Wireless-AC 9260 |
| Responsible Party | Gary D Spence, Chief Technology Officer, gary@junipersys.com , 435-753-1881 |
| Technical Contact | Kent Campbell, Juniper Systems Inc., kent@junipersys.com , 4357531881 |
| Test Firm | Kevin Wang, CETECOM Inc., kevin.wang@cetecom.com  , 408-586-6271 |
| TCB Email | james.donnellan@cetecom.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | The purpose of this C2PC is to allow for portable operation on the Juniper MS3 rugged tablet host and to permit colocation with N7NEM7455 and any one of the following: VSF25589, VSF26593, FIH76007, or VSF27065 transmitters. The highest reported Body SAR value is 1.48 W/kg and The highest reported Simultaneous SAR Separation ratio value is 0.04 as outlined in the filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| lasiu+b9siTuwWR1UsRTwQ== | 2022-06-29 | Class II permissive change or modification of presently authorized equipment |
| gmqvMW8u+3uUCq15smH6eA== | 2022-06-29 | Class II permissive change or modification of presently authorized equipment |
| 0TbtIjpx7MR51qkddkf5Qg== | 2022-06-29 | Class II permissive change or modification of presently authorized equipment |
| wlS8u0XVz1IzoEAnXXD/vQ== | 2022-05-27 | Change in identification of presently authorized equipment. Original FCC ID: PD99260D2L Grant Date: 02/05/2019 |
| ucm33ircdIWRS+t0pJHQBg== | 2022-05-27 | Change in identification of presently authorized equipment. Original FCC ID: PD99260D2L Grant Date: 02/05/2019 |
| fqtuQIVMzoX8kHe27kemDw== | 2022-05-27 | Change in identification of presently authorized equipment. Original FCC ID: PD99260D2L Grant Date: 02/05/2019 |
| NOs6iDBb96soxvxs3IU8XA== | 2022-05-27 | Change in identification of presently authorized equipment. Original FCC ID: PD99260D2L Grant Date: 02/06/2019 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2402-2480 MHz | 0.008 | 15C | CC |
| 2402-2480 MHz | 0.0130000 | 15C | CC |
| 2412-2472 MHz | 0.981 | 15C | CC, MO |
| 2422-2462 MHz | 0.509 | 15C | CC, MO |
| 5190-5230 MHz | 0.202 | 15E | CC, MO |
| 5210 MHz | 0.067 | 15E | CC, MO |
| 5260-5320 MHz | 0.193 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.21 | 15E | CC, MO, ND |
| 5290 MHz | 0.052 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.183 | 15E | CC, MO, ND |
| 5510-5670 MHz | 0.187 | 15E | CC, MO, ND |
| 5530-5690 MHz | 0.202 | 15E | CC, MO, ND |
| 5710 MHz | 0.18 | 15E | CC, MO, ND |
| 5720 MHz | 0.146 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.219 | 15E | CC, MO |
| 5755-5795 MHz | 0.227 | 15E | CC, MO |
| 5775 MHz | 0.143 | 15E | CC, MO |
Grants
TCB Grant - Application wlS8u0XVz1IzoEAnXXD/vQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 05/27/2022 Application Dated: 05/26/2022 |
| Juniper Systems, Inc. |
| 1132 W 1700 N |
| Logan, UT 84321 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF30805 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 19mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application wlS8u0XVz1IzoEAnXXD/vQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Systems, Inc. 1132 W 1700 N Logan, UT 84321 United States |
Date of Grant: 05/27/2022 Application Dated: 05/26/2022 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF30805 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 19mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 05/27/2022 Application Dated: 05/27/2022 |
| Juniper Systems, Inc. |
| 1132 W 1700 N |
| Logan, UT 84321 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF30805 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.981 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.509 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.31W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 19mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application ucm33ircdIWRS+t0pJHQBg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Systems, Inc. 1132 W 1700 N Logan, UT 84321 United States |
Date of Grant: 05/27/2022 Application Dated: 05/27/2022 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF30805 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.981 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.509 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.31W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 19mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 05/27/2022 Application Dated: 05/27/2022 |
| Juniper Systems, Inc. |
| 1132 W 1700 N |
| Logan, UT 84321 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF30805 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application NOs6iDBb96soxvxs3IU8XA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Systems, Inc. 1132 W 1700 N Logan, UT 84321 United States |
Date of Grant: 05/27/2022 Application Dated: 05/27/2022 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF30805 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 |
Date of Grant: 06/29/2022 Application Dated: 06/28/2022 |
| Juniper Systems, Inc. |
| 1132 W 1700 N |
| Logan, UT 84321 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF30805 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Dual Band Wireless-AC 9260 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| The purpose of this C2PC is to allow for portable operation on the Juniper MS3 rugged tablet host and to permit colocation with N7NEM7455 and any one of the following: VSF25589, VSF26593, FIH76007, or VSF27065 transmitters. The highest reported Body SAR value is 1.48 W/kg and The highest reported Simultaneous SAR Separation ratio value is 0.04 as outlined in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application lasiu+b9siTuwWR1UsRTwQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Systems, Inc. 1132 W 1700 N Logan, UT 84321 United States |
Date of Grant: 06/29/2022 Application Dated: 06/28/2022 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF30805 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Dual Band Wireless-AC 9260 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| The purpose of this C2PC is to allow for portable operation on the Juniper MS3 rugged tablet host and to permit colocation with N7NEM7455 and any one of the following: VSF25589, VSF26593, FIH76007, or VSF27065 transmitters. The highest reported Body SAR value is 1.48 W/kg and The highest reported Simultaneous SAR Separation ratio value is 0.04 as outlined in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 |
Date of Grant: 06/29/2022 Application Dated: 06/27/2022 |
| Juniper Systems, Inc. |
| 1132 W 1700 N |
| Logan, UT 84321 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF30805 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Band Wireless-AC 9260 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.981 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.509 |
| Power Output listed is conducted. Modular Approval. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The purpose of this C2PC is to allow for portable operation on the Juniper MS3 rugged tablet host and to permit colocation with N7NEM7455 and any one of the following: VSF25589, VSF26593, FIH76007, or VSF27065 transmitters. The highest reported Body SAR value is 1.48 W/kg and The highest reported Simultaneous SAR Separation ratio value is 0.04 as outlined in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application gmqvMW8u+3uUCq15smH6eA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Systems, Inc. 1132 W 1700 N Logan, UT 84321 United States |
Date of Grant: 06/29/2022 Application Dated: 06/27/2022 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF30805 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Band Wireless-AC 9260 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.981 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.509 |
| Power Output listed is conducted. Modular Approval. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The purpose of this C2PC is to allow for portable operation on the Juniper MS3 rugged tablet host and to permit colocation with N7NEM7455 and any one of the following: VSF25589, VSF26593, FIH76007, or VSF27065 transmitters. The highest reported Body SAR value is 1.48 W/kg and The highest reported Simultaneous SAR Separation ratio value is 0.04 as outlined in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 05/27/2022 Application Dated: 05/27/2022 |
| Juniper Systems, Inc. |
| 1132 W 1700 N |
| Logan, UT 84321 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF30805 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.188 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.202 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.067 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.193 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.21 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.052 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.183 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.187 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.18 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.146 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.202 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.219 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.227 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.143 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 19mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application fqtuQIVMzoX8kHe27kemDw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Systems, Inc. 1132 W 1700 N Logan, UT 84321 United States |
Date of Grant: 05/27/2022 Application Dated: 05/27/2022 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF30805 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.188 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.202 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.067 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.193 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.21 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.052 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.183 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.187 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.18 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.146 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.202 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.219 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.227 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.143 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 19mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 |
Date of Grant: 06/29/2022 Application Dated: 06/27/2022 |
| Juniper Systems, Inc. |
| 1132 W 1700 N |
| Logan, UT 84321 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF30805 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Dual Band Wireless-AC 9260 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.188 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.202 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.067 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.193 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.21 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.052 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.183 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.187 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.18 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.146 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.202 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.219 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.227 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.143 |
| Power Output listed is conducted. Modular Approval. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The purpose of this C2PC is to allow for portable operation on the Juniper MS3 rugged tablet host and to permit colocation with N7NEM7455 and any one of the following: VSF25589, VSF26593, FIH76007, or VSF27065 transmitters. The highest reported Body SAR value is 1.48 W/kg and The highest reported Simultaneous SAR Separation ratio value is 0.04 as outlined in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 0TbtIjpx7MR51qkddkf5Qg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Systems, Inc. 1132 W 1700 N Logan, UT 84321 United States |
Date of Grant: 06/29/2022 Application Dated: 06/27/2022 |
| Attention: Gary Spence , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VSF30805 |
| Name of Grantee: | Juniper Systems, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Dual Band Wireless-AC 9260 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.188 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.202 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.067 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.193 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.21 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.052 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.183 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.187 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.18 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.146 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.202 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.219 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.227 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.143 |
| Power Output listed is conducted. Modular Approval. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The purpose of this C2PC is to allow for portable operation on the Juniper MS3 rugged tablet host and to permit colocation with N7NEM7455 and any one of the following: VSF25589, VSF26593, FIH76007, or VSF27065 transmitters. The highest reported Body SAR value is 1.48 W/kg and The highest reported Simultaneous SAR Separation ratio value is 0.04 as outlined in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |