FCC ID VT6-250DB
802.11n Wireless LAN Dual band mPCI module
by Metalink Ltd.
Grantee Code: VT6 Product Code: 250DB
Latest application date: 2008-09-25
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Original Equipment | 2008-09-25 |
| 2412-2452 MHz | Original Equipment | 2008-09-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2008-09-25 | PDF 208.5 KB |
| Internal Photos | Internal Photos | 2008-09-25 | PDF 361.9 KB |
| External Photos | External Photos | 2008-09-25 | PDF 254.1 KB |
| Label Location Info | ID Label/Location Info | 2008-09-25 | PDF 98.3 KB |
| Test Setup Photos | Test Setup Photos | 2008-09-25 | PDF 372.5 KB |
| DFS Report | Test Report | 2008-09-25 | PDF 1,002.1 KB |
| Test Report 11an I | Test Report | 2008-09-25 | PDF 3 MB |
| Test Report 11an II | Test Report | 2008-09-25 | PDF 2.9 MB |
| Test Report abgn I | Test Report | 2008-09-25 | PDF 2.4 MB |
| Test Report abgn II | Test Report | 2008-09-25 | PDF 2.4 MB |
| Attestation letter | Cover Letter(s) | 2008-09-25 | PDF 23.3 KB |
| DOC Letter | Cover Letter(s) | 2008-09-25 | PDF 23.3 KB |
| LMA Letter | Cover Letter(s) | 2008-09-25 | PDF 29.4 KB |
| Power of Attorney | Cover Letter(s) | 2008-09-25 | PDF 28.2 KB |
| Request for Confidentiality | Cover Letter(s) | 2008-09-25 | PDF 34.3 KB |
| MPE | RF Exposure Info | 2008-09-25 | PDF 106.8 KB |
Application Information
| Application ID | 0Pj1i3nZmqJbufiI3U2cOA== |
|---|---|
| Final Action Date | 2008-09-25 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0017140583 |
| Model | -250DB |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11n Wireless LAN Dual band mPCI module |
| Responsible Party | Amir Shwartz, RF system engineer, amirsh@mtlk.com  , +972 9960 5432 |
| Agent | Leo Leo Leo, Sporton International Inc., leo.huang@sporton.com.tw  , +86-3-656-9065- |
| Test Firm | Alex Chen, Sporton International Inc., alex@sporton.com.tw , 886-3-327-3456 |
| TCB Email | Brandhorst.dirk@phoenix-testlab.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 2x3 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 0Pj1i3nZmqJbufiI3U2cOA== | 2008-09-25 | Original Equipment |
| /MJxjD7TDUB3ehsvCChgcQ== | 2008-09-25 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application 0Pj1i3nZmqJbufiI3U2cOA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 09/25/2008 Application Dated: 09/25/2008 |
| Metalink Ltd. |
| Yakum Buisiness Park |
| Yakum, 60972 Israel |
| Attention: Amir Shwartz , RF system engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VT6-250DB |
| Name of Grantee: | Metalink Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11n Wireless LAN Dual band mPCI module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0492 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.1726 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.1762 |
| Limited Single Modular |
| Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 2x3 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 0Pj1i3nZmqJbufiI3U2cOA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Metalink Ltd. Yakum Buisiness Park P.O. Box , Yakum, 60972 Israel |
Date of Grant: 09/25/2008 Application Dated: 09/25/2008 |
| Attention: Amir Shwartz , RF system engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VT6-250DB |
| Name of Grantee: | Metalink Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11n Wireless LAN Dual band mPCI module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0492 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.1726 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.1762 |
| Limited Single Modular |
| Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 2x3 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 09/25/2008 Application Dated: 09/25/2008 |
| Metalink Ltd. |
| Yakum Buisiness Park |
| Yakum, 60972 Israel |
| Attention: Amir Shwartz , RF system engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VT6-250DB |
| Name of Grantee: | Metalink Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11n Wireless LAN Dual band mPCI module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2047 | ||
| CC MO | 15C | 2412.0 - 2452.0 | 0.2099 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.1714 | ||
| CC MO | 15C | 5755.0 - 5755.0 | 0.1593 |
| Limited Single Modular |
| Limited Modular Approval. Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 2x3 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application /MJxjD7TDUB3ehsvCChgcQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Metalink Ltd. Yakum Buisiness Park P.O. Box , Yakum, 60972 Israel |
Date of Grant: 09/25/2008 Application Dated: 09/25/2008 |
| Attention: Amir Shwartz , RF system engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VT6-250DB |
| Name of Grantee: | Metalink Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11n Wireless LAN Dual band mPCI module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2047 | ||
| CC MO | 15C | 2412.0 - 2452.0 | 0.2099 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.1714 | ||
| CC MO | 15C | 5755.0 - 5755.0 | 0.1593 |
| Limited Single Modular |
| Limited Modular Approval. Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 2x3 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |