FCC ID VTV-M7EMEGA
UHF RFID RAIN MODULE
by TSC Auto ID Technology Co., Ltd.
Grantee Code: VTV Product Code: M7EMEGA
Latest application date: 2024-09-12
FCC ID Device Details
| FCC ID | VTV-M7EMEGA |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | VTV |
| Product Code | M7EMEGA |
| Applicant Business | TSC Auto ID Technology Co., Ltd. 🇹🇼 |
| Related Domains |  tscprinters.com |
| Equipment Class | UHF RFID RAIN MODULE |
| Test Firm | DEKRA TESTING AND CERTIFICATION CO., LTD Linko Lab |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.75-927.75 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-12 |
| 902.75-927.75 MHz | Change in identification of presently authorized equipment. Original FCC ID: QV5MERCURY7E-M Grant Date: 03/26/2024 | 2024-08-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2024-09-12 | PDF 2 MB |
| User Manual | Users Manual | 2024-08-29 | PDF 2.6 MB |
| Internal Photos | Internal Photos | 2024-09-12 | PDF 1 MB |
| External Photos | External Photos | 2024-09-12 | PDF 2.8 MB |
| External Photos | External Photos | 2024-08-29 | PDF 596.2 KB |
| Original External Photos | External Photos | 2024-08-29 | PDF 139 KB |
| Label Location | ID Label/Location Info | 2024-08-29 | PDF 104.1 KB |
| Label Sample | ID Label/Location Info | 2024-08-29 | PDF 66.2 KB |
| TSUP | Test Setup Photos | 2024-09-12 | PDF 649.8 KB |
| Antenna Report 1 | Test Report | 2024-09-12 | PDF 1.3 MB |
| Antenna Report 2 | Test Report | 2024-09-12 | PDF 823.4 KB |
| Antenna Report 3 | Test Report | 2024-09-12 | PDF 707.7 KB |
| Test Report | Test Report | 2024-09-12 | PDF 703.3 KB |
| Test Report Appendices | Test Report | 2024-09-12 | PDF 841.6 KB |
| Attestation Statement Part 2.911(d)(7) | Attestation Statements | 2024-09-12 | PDF 94.1 KB |
| Attstn Stmts Part 2.911(d)(5)(i)&(ii) | Attestation Statements | 2024-09-12 | PDF 241 KB |
| Attestation Statement 2.911(d)(7) | Attestation Statements | 2024-08-29 | PDF 151.8 KB |
| Attstn Stmt parts 2.911(d)(5)(i)&(ii) | Attestation Statements | 2024-08-29 | PDF 241 KB |
| Declaration of Authority | Attestation Statements | 2024-08-29 | PDF 230.1 KB |
| Authorization Letter | Cover Letter(s) | 2024-09-12 | PDF 72.2 KB |
| C2PC Letter | Cover Letter(s) | 2024-09-12 | PDF 23.2 KB |
| Confidentiality Letter | Cover Letter(s) | 2024-09-12 | PDF 106.6 KB |
| Change in ID - New Applicant | Cover Letter(s) | 2024-08-29 | PDF 129.5 KB |
| Change in ID - Original Applicant | Cover Letter(s) | 2024-08-29 | PDF 503 KB |
| RF Exposure | RF Exposure Info | 2024-09-12 | PDF 200.9 KB |
| Operational Description Metadata only | Operational Description | PDF 277 KB |
Application Information
| Application ID | wijDvjxz5OySVT5Q+7bZ2Q== |
|---|---|
| Final Action Date | 2024-09-12 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0017220849 |
| Model | M7EMEGA |
| Frequency Range | 902.75-927.75 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | UHF RFID RAIN MODULE |
| Responsible Party | Roger wu, roger_wu@tscprinters.com , 039906677 |
| Test Firm | Mirenda Liao, DEKRA TESTING AND CERTIFICATION CO., LTD Linko Lab, mirenda.liao@dekra.com  , +886-2-2602-7968 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. Class 2 Permissive Change: adds new antennas to approved antenna list. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| wijDvjxz5OySVT5Q+7bZ2Q== | 2024-09-12 | Class II permissive change or modification of presently authorized equipment |
| UcJqNXT8r96LWEiErnNF6Q== | 2024-08-29 | Change in identification of presently authorized equipment. Original FCC ID: QV5MERCURY7E-M Grant Date: 03/26/2024 |
Equipment Authorization
Grants
TCB Grant - Application wijDvjxz5OySVT5Q+7bZ2Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 09/12/2024 Application Dated: 09/05/2024 |
| TSC Auto ID Technology Co., Ltd. |
| No.35, Sec.2, Ligong 1st Rd., Wujie Town |
| I Lan Hsien, 268 Taiwan |
| Attention: Roger wu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VTV-M7EMEGA |
| Name of Grantee: | TSC Auto ID Technology Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UHF RFID RAIN MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.75 | 0.964 |
| Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. Class 2 Permissive Change: adds new antennas to approved antenna list. |
EAS Grant - Application wijDvjxz5OySVT5Q+7bZ2Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TSC Auto ID Technology Co., Ltd. No.35, Sec.2, Ligong 1st Rd., Wujie Town I Lan Hsien, 268 Taiwan |
Date of Grant: 09/12/2024 Application Dated: 09/05/2024 |
| Attention: Roger wu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VTV-M7EMEGA |
| Name of Grantee: | TSC Auto ID Technology Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UHF RFID RAIN MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.75 | 0.964 |
| Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. Class 2 Permissive Change: adds new antennas to approved antenna list. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 08/29/2024 Application Dated: 08/27/2024 |
| TSC Auto ID Technology Co., Ltd. |
| 9F., No. 95, Minquan Rd. Xindian Dist. New Taipei |
| Tapei, 23141 Taiwan |
| Attention: Roger wu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VTV-M7EMEGA |
| Name of Grantee: | TSC Auto ID Technology Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UHF RFID RAIN MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.75 | 1.0 |
| Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
EAS Grant - Application UcJqNXT8r96LWEiErnNF6Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TSC Auto ID Technology Co., Ltd. 9F., No. 95, Minquan Rd. Xindian Dist. New Taipei Tapei, 23141 Taiwan |
Date of Grant: 08/29/2024 Application Dated: 08/27/2024 |
| Attention: Roger wu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VTV-M7EMEGA |
| Name of Grantee: | TSC Auto ID Technology Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UHF RFID RAIN MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.75 | 1.0 |
| Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| Mail To: |