FCC ID VUIUPWL6025

WIFI MODULE

by PEGATRON CORPORATION

Grantee Code: VUI   Product Code: UPWL6025
Latest application date: 2011-08-19

FCC ID Device Details

FCC IDVUIUPWL6025
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeVUI
Product CodeUPWL6025
Applicant BusinessPEGATRON CORPORATION 🇹🇼
Related Domains pegatroncorp.com
Equipment ClassWIFI MODULE
Test FirmTraining Research Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2011-08-19
2412-2462 MHzOriginal Equipment2009-11-18

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2010-01-01PDF 212.6 KB
Internal PhotosInternal Photos2010-01-01PDF 897.7 KB
EXTERNAL PHOTOSExternal Photos2011-10-03PDF 1.7 MB
External PhotosExternal Photos2010-01-01PDF 897.7 KB
LabelID Label/Location Info2009-11-18PDF 151.5 KB
TEST SETUP PHOTOSTest Setup Photos2011-10-03PDF 341.6 KB
Test Setup PhotosTest Setup Photos2010-01-01PDF 218.3 KB
TEST REPORTTest Report2011-08-19PDF 501.6 KB
Test ReportTest Report2009-11-18PDF 3.2 MB
ATTESTATION LETTERAttestation Statements2011-08-19PDF 96.4 KB
Attestation LetterCover Letter(s)2009-11-18PDF 97.2 KB
AUTHORIZATION LETTERCover Letter(s)2011-08-19PDF 100.6 KB
CLASS II CHANGE LETTERCover Letter(s)2011-08-19PDF 105.4 KB
CONFIDENTIAL REQUEST LETTERCover Letter(s)2011-08-19PDF 110.2 KB
Authorization LetterCover Letter(s)2009-11-18PDF 100.6 KB
Confidential LetterCover Letter(s)2009-11-18PDF 110.9 KB
Modular Approval LetterCover Letter(s)2009-11-18PDF 113.2 KB
RF EXPOSURERF Exposure Info2011-08-19PDF 5.5 MB
RF ExposureRF Exposure Info2009-11-18PDF 2.7 MB

Application Information

Application IDBdHRFEkK8HtF+GnDIrPEtg==
Final Action Date2011-08-19
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0020241758
ModelUPWL6025
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWIFI MODULE
Responsible PartyJamescz Wang, Deputy Director, jamescz_wang@pegatroncorp.com , 886-2-81439001
Test FirmJack Tsai, Training Research Co., Ltd., jack@trclab.com.tw , 886-2-26935155
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date10/03/2011
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. This is a Modular Approval Certification. This EUT may only be marketed and sold to OEM customers only for installation in their units. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz.

Applications

Application IDDatePurpose
BdHRFEkK8HtF+GnDIrPEtg==2011-08-19Class II permissive change or modification of presently authorized equipment
3SKCDTpu3iry5wL7c2aJlg==2009-11-18Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.6060915C
2422-2452 MHz0.5548815C

Grants

TCB Grant - Application BdHRFEkK8HtF+GnDIrPEtg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 08/19/2011

Application Dated: 08/19/2011
PEGATRON CORPORATION
5F., NO. 76, LIGONG ST., BEITOU DISTRICT,
TAIPEI CITY, 11259
Taiwan
 
Attention: Jamescz Wang , Deputy Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VUIUPWL6025
Name of Grantee:  PEGATRON CORPORATION
Equipment Class: Digital Transmission System
Notes: WIFI MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.60609  
15C 2422.0  -  2452.0 0.55488  

Power listed is conducted. This is a Modular Approval Certification. This EUT may only be marketed and sold to OEM customers only for installation in their units. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz.

EAS Grant - Application BdHRFEkK8HtF+GnDIrPEtg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

PEGATRON CORPORATION
5F., NO. 76, LIGONG ST., BEITOU DISTRICT,
TAIPEI CITY, 11259
Taiwan
  Date of Grant: 08/19/2011

Application Dated: 08/19/2011
 
Attention: Jamescz Wang , Deputy Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VUIUPWL6025
Name of Grantee:  PEGATRON CORPORATION
Equipment Class: Digital Transmission System
Notes: WIFI MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.60609  
15C 2422.0  -  2452.0 0.55488  

Power listed is conducted. This is a Modular Approval Certification. This EUT may only be marketed and sold to OEM customers only for installation in their units. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz.



TCB Grant - Application 3SKCDTpu3iry5wL7c2aJlg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 11/18/2009

Application Dated: 11/17/2009
PEGATRON CORPORATION
5F., NO. 76, LIGONG ST., BEITOU DISTRICT,
TAIPEI CITY, 11259
Taiwan
 
Attention: Jamescz Wang , Deputy Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VUIUPWL6025
Name of Grantee:  PEGATRON CORPORATION
Equipment Class: Digital Transmission System
Notes: WIFI MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.60609  
15C 2422.0  -  2452.0 0.55488  

Power listed is conducted. This is a Modular Approval Certification. This EUT may only be marketed and sold to OEM customers only for installation in their units. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz.


EAS Grant - Application 3SKCDTpu3iry5wL7c2aJlg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

PEGATRON CORPORATION
5F., NO. 76, LIGONG ST., BEITOU DISTRICT,
TAIPEI CITY, 11259
Taiwan
  Date of Grant: 11/18/2009

Application Dated: 11/17/2009
 
Attention: Jamescz Wang , Deputy Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VUIUPWL6025
Name of Grantee:  PEGATRON CORPORATION
Equipment Class: Digital Transmission System
Notes: WIFI MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.60609  
15C 2422.0  -  2452.0 0.55488  

Power listed is conducted. This is a Modular Approval Certification. This EUT may only be marketed and sold to OEM customers only for installation in their units. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz.



Mail To: