FCC ID VV7-MBMC5621-D1

PCIe WIRELESS WAN CARD

by Ericsson AB

Grantee Code: VV7   Product Code: MBMC5621D1
Latest application date: 2012-11-05
Documents for this grantee are blocked from local display. Public filing metadata and document detail pages remain available, with links to the FCC attachment forwarder and document sources.

FCC ID Device Details

FCC IDVV7-MBMC5621-D1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeVV7
Product CodeMBMC5621D1
Applicant BusinessEricsson AB 🇸🇪
Related Domains ericsson.com
Equipment ClassPCIe WIRELESS WAN CARD
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2012-11-05
824.2-848.8 MHzChange in identification of presently authorized equipment. Original FCC ID: VV7-MBMC5621 Grant Date: 11/28/20112012-10-09

Exhibits

DocumentTypeAvailableFile
USERS MANUAL MODULE Privacy/DMCA removedUsers Manual2013-02-07PDF 1.1 MB
USERS MANUAL SYSTEM BlockedUsers Manual2013-02-07PDF 679.1 KB
INTERNAL PHOTOS BlockedInternal Photos2013-02-07PDF 3.2 MB
INTERNAL PHOTOS ANTENNA LOCATION BlockedInternal Photos2013-02-07PDF 112.7 KB
EXTERNAL PHOTOS BlockedExternal Photos2013-02-07PDF 1.8 MB
External Photos Privacy/DMCA removedExternal Photos2012-10-09PDF 165.4 KB
LABEL SAMPLE AND LOCATION BlockedID Label/Location Info2012-11-05PDF 1,015.6 KB
Label Location BlockedID Label/Location Info2012-10-09PDF 95.4 KB
Label Sample BlockedID Label/Location Info2012-10-09PDF 197.1 KB
TEST SETUP PCB BlockedTest Setup Photos2013-02-07PDF 153.5 KB
TEST SETUP RF EXPOSURE BlockedTest Setup Photos2013-02-07PDF 122.2 KB
TEST REPORT BlockedTest Report2012-11-05PDF 351 KB
C2PC LETTER BlockedCover Letter(s)2012-11-05PDF 32.9 KB
GRANTEE HOST AGREEMENT LETTER REV BlockedCover Letter(s)2012-11-05PDF 32.7 KB
LONG TERM CONFIDENTIALITY BlockedCover Letter(s)2012-11-05PDF 29 KB
POA BlockedCover Letter(s)2012-11-05PDF 24.7 KB
SHORT TERM CONFIDENTIALITY BlockedCover Letter(s)2012-11-05PDF 28.9 KB
Authorization Letter BlockedCover Letter(s)2012-10-09PDF 26.4 KB
Change in ID Letter BlockedCover Letter(s)2012-10-09PDF 56.8 KB
RF EXPOSURE APPENDIX A AND APPENDIX B BlockedRF Exposure Info2012-11-05PDF 3.3 MB
RF EXPOSURE APPENDIX C BlockedRF Exposure Info2012-11-05PDF 4.6 MB

Application Information

Application IDM3iVdvPmZ3g22EFghHn1rQ==
Final Action Date2012-11-05
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0017216037
Model-MBMC5621-D1
Frequency Range824.2-848.8 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionPCIe WIRELESS WAN CARD
Responsible PartyBernie Fuller, Certification Approval Manager, bernie.fuller@ericsson.com , +46 107124371
Test FirmAlex Chen, Sporton International Inc., alex@sporton.com.tw , 886-3-327-3456
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date02/07/2013
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsSingle Modular Approval. Power out is conducted at the antenna terminal. This filling only covers the device to be used for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing, except in accordance with FCC multi-transmitter product procedures. This device has been approved for use in specific co-location configurations, as described in this filing. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. Antennas used for this module must not exceed 7.2 dBi gain in the 850 MHz band and 3.5 dBi in the 1900 MHz band, for mobile and fixed operating configurations. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM/WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz and 1900 MHz operations. (Original grant date 10/09/2012) Class II Permissive Change: This Class II Permissive Change is to have this module installed into the Dell Latitude 10 – ST2 tablet PC. The maximum measured radiated powers are 1.48W ERP and 1.64W EIRP for part 22 and 24, respectively. The highest reported SAR value is 1.41W/kg.

Applications

Application IDDatePurpose
M3iVdvPmZ3g22EFghHn1rQ==2012-11-05Class II permissive change or modification of presently authorized equipment
yTcNTZvShj4A82wyGlQdNw==2012-10-09Change in identification of presently authorized equipment. Original FCC ID: VV7-MBMC5621 Grant Date: 11/28/2011
mVH8OliKv7PluJ4+bzfQvg==2012-10-09Change in identification of presently authorized equipment. Original FCC ID: VV7-MBMC5621 Grant Date: 11/28/2011

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
824.2-848.8 MHz1.770.1ppm300KGXW22HBC
824.2-848.8 MHz1.090.1ppm300KG7W22HBC
826.4-846.6 MHz0.440.1ppm4M20F9W22HBC
1850.2-1909.8 MHz0.940.04ppm300KGXW24EBC
1850.2-1909.8 MHz0.860.04ppm300KG7W24EBC
1852.4-1907.6 MHz0.490.04ppm4M20F9W24EBC

Grants

TCB Grant - Application yTcNTZvShj4A82wyGlQdNw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 10/09/2012

Application Dated: 10/09/2012
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMC5621-D1
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: PCIE WIRELESS WAN CARD
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.77 0.1  PM 300KGXW
BC 22H 824.2  -  848.8 1.09 0.1  PM 300KG7W
BC 22H 826.4  -  846.6 0.44 0.1  PM 4M20F9W
BC 24E 1850.2  -  1909.8 0.94 0.04  PM 300KGXW
BC 24E 1850.2  -  1909.8 0.86 0.04  PM 300KG7W
BC 24E 1852.4  -  1907.6 0.49 0.04  PM 4M20F9W

Single Modular Approval. Power out is conducted at the antenna terminal. This filling only covers the device to be used for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing, except in accordance with FCC multi-transmitter product procedures. This device has been approved for use in specific co-location configurations, as described in this filing. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance.

Antennas used for this module must not exceed 7.2 dBi gain in the 850 MHz band and 3.5 dBi in the 1900 MHz band, for mobile and fixed operating configurations. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM/WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz and 1900 MHz operations.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application yTcNTZvShj4A82wyGlQdNw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
  Date of Grant: 10/09/2012

Application Dated: 10/09/2012
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMC5621-D1
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: PCIE WIRELESS WAN CARD
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.77 0.1  PM 300KGXW
BC 22H 824.2  -  848.8 1.09 0.1  PM 300KG7W
BC 22H 826.4  -  846.6 0.44 0.1  PM 4M20F9W
BC 24E 1850.2  -  1909.8 0.94 0.04  PM 300KGXW
BC 24E 1850.2  -  1909.8 0.86 0.04  PM 300KG7W
BC 24E 1852.4  -  1907.6 0.49 0.04  PM 4M20F9W

Single Modular Approval. Power out is conducted at the antenna terminal. This filling only covers the device to be used for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing, except in accordance with FCC multi-transmitter product procedures. This device has been approved for use in specific co-location configurations, as described in this filing. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance.

Antennas used for this module must not exceed 7.2 dBi gain in the 850 MHz band and 3.5 dBi in the 1900 MHz band, for mobile and fixed operating configurations. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM/WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz and 1900 MHz operations.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application mVH8OliKv7PluJ4+bzfQvg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 10/09/2012

Application Dated: 10/09/2012
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMC5621-D1
Name of Grantee:  Ericsson AB
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: PCIE WIRELESS WAN CARD
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

GSM/WCDMA Modular transmitter

EAS Grant - Application mVH8OliKv7PluJ4+bzfQvg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
  Date of Grant: 10/09/2012

Application Dated: 10/09/2012
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMC5621-D1
Name of Grantee:  Ericsson AB
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: PCIE WIRELESS WAN CARD
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

GSM/WCDMA Modular transmitter



TCB Grant - Application M3iVdvPmZ3g22EFghHn1rQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 11/05/2012

Application Dated: 10/10/2012
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMC5621-D1
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: PCIe WIRELESS WAN CARD
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.77 0.1  PM 300KGXW
BC 22H 824.2  -  848.8 1.09 0.1  PM 300KG7W
BC 22H 826.4  -  846.6 0.44 0.1  PM 4M20F9W
BC 24E 1850.2  -  1909.8 0.94 0.04  PM 300KGXW
BC 24E 1850.2  -  1909.8 0.86 0.04  PM 300KG7W
BC 24E 1852.4  -  1907.6 0.49 0.04  PM 4M20F9W

Single Modular Approval. Power out is conducted at the antenna terminal. This filling only covers the device to be used for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing, except in accordance with FCC multi-transmitter product procedures. This device has been approved for use in specific co-location configurations, as described in this filing. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. Antennas used for this module must not exceed 7.2 dBi gain in the 850 MHz band and 3.5 dBi in the 1900 MHz band, for mobile and fixed operating configurations. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM/WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz and 1900 MHz operations. (Original grant date 10/09/2012)

Class II Permissive Change: This Class II Permissive Change is to have this module installed into the Dell Latitude 10 – ST2 tablet PC. The maximum measured radiated powers are 1.48W ERP and 1.64W EIRP for part 22 and 24, respectively. The highest reported SAR value is 1.41W/kg.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application M3iVdvPmZ3g22EFghHn1rQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
  Date of Grant: 11/05/2012

Application Dated: 10/10/2012
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMC5621-D1
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: PCIe WIRELESS WAN CARD
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.77 0.1  PM 300KGXW
BC 22H 824.2  -  848.8 1.09 0.1  PM 300KG7W
BC 22H 826.4  -  846.6 0.44 0.1  PM 4M20F9W
BC 24E 1850.2  -  1909.8 0.94 0.04  PM 300KGXW
BC 24E 1850.2  -  1909.8 0.86 0.04  PM 300KG7W
BC 24E 1852.4  -  1907.6 0.49 0.04  PM 4M20F9W

Single Modular Approval. Power out is conducted at the antenna terminal. This filling only covers the device to be used for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing, except in accordance with FCC multi-transmitter product procedures. This device has been approved for use in specific co-location configurations, as described in this filing. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. Antennas used for this module must not exceed 7.2 dBi gain in the 850 MHz band and 3.5 dBi in the 1900 MHz band, for mobile and fixed operating configurations. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM/WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz and 1900 MHz operations. (Original grant date 10/09/2012)

Class II Permissive Change: This Class II Permissive Change is to have this module installed into the Dell Latitude 10 – ST2 tablet PC. The maximum measured radiated powers are 1.48W ERP and 1.64W EIRP for part 22 and 24, respectively. The highest reported SAR value is 1.41W/kg.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To: