FCC ID VV7-MBMC5621-D1

VV7MBMC5621-D1, VV7 MBMC5621D1, VV7-MBMC5621-D1, VV7-MBMC562I-DI

Ericsson AB PCIe WIRELESS WAN CARD

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: VV7-MBMC5621-D1 is . The remaining characters of the FCC ID, -MBMC5621-D1, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Ericsson AB

Full Company Details: Ericsson AB - VV7
Company Code: VV7
Address:
   Ericsson AB
   Mobile Broadband Modules Lindholmspiren 11
   Gothenburg, N/A SE 417 56
   Sweden
App # Purpose Date Unique ID
1 Class II Permissive Change 2012-11-05 M3iVdvPmZ3g22EFghHn1rQ==
2 Change in Identification 2012-10-09 mVH8OliKv7PluJ4+bzfQvg==
3 Change in Identification 2012-10-09 yTcNTZvShj4A82wyGlQdNw==

Approved Operating Frequencies

App # Frequency RangePower OutputToleranceEmission DesignatorRule PartsGrant Notes
1.1824.2-848.81.770.1ppm300KGXW22HBC
1.2824.2-848.81.090.1ppm300KG7W22HBC
1.3826.4-846.60.440.1ppm4M20F9W22HBC
1.41850.2-1909.80.940.04ppm300KGXW24EBC
1.51850.2-1909.80.860.04ppm300KG7W24EBC
1.61852.4-1907.60.490.04ppm4M20F9W24EBC
2.1-15B
3.1824.2-848.81.770.1ppm300KGXW22HBC
3.2824.2-848.81.090.1ppm300KG7W22HBC
3.3826.4-846.60.440.1ppm4M20F9W22HBC
3.41850.2-1909.80.940.04ppm300KGXW24EBC
3.51850.2-1909.80.860.04ppm300KG7W24EBC
3.61852.4-1907.60.490.04ppm4M20F9W24EBC

Exhibits

All Available Documents

App # Document Type Submitted / Available
1 C2PC LETTERCover Letter(s) / Adobe Acrobat PDF (32 kB) 2012-10-10 / 2012-11-05
1 INTERNAL PHOTOS ANTENNA LOCATIONInternal Photos / Adobe Acrobat PDF (112 kB) 2012-10-10 / 2013-02-07
1 RF EXPOSURE APPENDIX CRF Exposure Info / Adobe Acrobat PDF (4726 kB) 2012-10-10 / 2012-11-05
1 LONG TERM CONFIDENTIALITYCover Letter(s) / Adobe Acrobat PDF (29 kB) 2012-10-10 / 2012-11-05
1 TEST SETUP PCBTest Setup Photos / Adobe Acrobat PDF (153 kB) 2012-10-10 / 2013-02-07
1 TEST REPORTTest Report / Adobe Acrobat PDF (350 kB) 2012-10-10 / 2012-11-05
1 POACover Letter(s) / Adobe Acrobat PDF (24 kB) 2012-10-10 / 2012-11-05
1 TEST SETUP RF EXPOSURETest Setup Photos / Adobe Acrobat PDF (122 kB) 2012-10-10 / 2013-02-07
1 GRANTEE HOST AGREEMENT LETTER REVCover Letter(s) / Adobe Acrobat PDF (32 kB) 2012-11-05 / 2012-11-05
1 SHORT TERM CONFIDENTIALITYCover Letter(s) / Adobe Acrobat PDF (28 kB) 2012-10-10 / 2012-11-05
1 USERS MANUAL MODULEUsers Manual / Adobe Acrobat PDF (1169 kB) 2012-10-10 / 2013-02-07
1 EXTERNAL PHOTOSExternal Photos / Adobe Acrobat PDF (1845 kB) 2012-10-10 / 2013-02-07
1 LABEL SAMPLE AND LOCATIONID Label/Location Info / Adobe Acrobat PDF (1015 kB) 2012-10-10 / 2012-11-05
1 USERS MANUAL SYSTEMUsers Manual / Adobe Acrobat PDF (679 kB) 2012-10-10 / 2013-02-07
1 INTERNAL PHOTOSInternal Photos / Adobe Acrobat PDF (3263 kB) 2012-10-10 / 2013-02-07
1 RF EXPOSURE APPENDIX A AND APPENDIX BRF Exposure Info / Adobe Acrobat PDF (3334 kB) 2012-10-10 / 2012-11-05
2 External PhotosExternal Photos / Adobe Acrobat PDF (165 kB) 2012-10-09 / 2012-10-09
2 Label LocationID Label/Location Info / Adobe Acrobat PDF (95 kB) 2012-10-09 / 2012-10-09
2 Label SampleID Label/Location Info / Adobe Acrobat PDF (197 kB) 2012-10-09 / 2012-10-09
2 Authorization LetterCover Letter(s) / Adobe Acrobat PDF (26 kB) 2012-10-09 / 2012-10-09
2 Change in ID LetterCover Letter(s) / Adobe Acrobat PDF (56 kB) 2012-10-09 / 2012-10-09
3 Label LocationID Label/Location Info / Adobe Acrobat PDF (95 kB) 2012-10-09 / 2012-10-09
3 Label SampleID Label/Location Info / Adobe Acrobat PDF (197 kB) 2012-10-09 / 2012-10-09
3 Authorization LetterCover Letter(s) / Adobe Acrobat PDF (26 kB) 2012-10-09 / 2012-10-09
3 Change in ID LetterCover Letter(s) / Adobe Acrobat PDF (56 kB) 2012-10-09 / 2012-10-09
3 External PhotosExternal Photos / Adobe Acrobat PDF (165 kB) 2012-10-09 / 2012-10-09

APP # 1 (2012-11-05) Documents

SCHEMATICS SYSTEM
 2012-10-10 / N/A Schematics / Adobe Acrobat PDF (2187 kB)
C2PC LETTER
 2012-10-10 / 2012-11-05 Cover Letter(s) / Adobe Acrobat PDF (32 kB)
Operational Description Power Reduction
 2012-10-11 / N/A Operational Description / Adobe Acrobat PDF (1261 kB)
INTERNAL PHOTOS ANTENNA LOCATION
 2012-10-10 / 2013-02-07 Internal Photos / Adobe Acrobat PDF (112 kB)
TUNE UP PROCEDURE
 2012-10-10 / N/A Parts List/Tune Up Info / Adobe Acrobat PDF (258 kB)
RF EXPOSURE APPENDIX C
 2012-10-10 / 2012-11-05 RF Exposure Info / Adobe Acrobat PDF (4726 kB)
GRANTEE HOST AGREEMENT LETTER REV
 2012-11-05 / 2012-11-05 Cover Letter(s) / Adobe Acrobat PDF (32 kB)
SHORT TERM CONFIDENTIALITY
 2012-10-10 / 2012-11-05 Cover Letter(s) / Adobe Acrobat PDF (28 kB)
LONG TERM CONFIDENTIALITY
 2012-10-10 / 2012-11-05 Cover Letter(s) / Adobe Acrobat PDF (29 kB)
OPERATIONAL DESCRIPTION TWO WAY AUTHENTICATION
 2012-10-10 / N/A Operational Description / Adobe Acrobat PDF (29 kB)
TEST SETUP PCB
 2012-10-10 / 2013-02-07 Test Setup Photos / Adobe Acrobat PDF (153 kB)
USERS MANUAL MODULE
 2012-10-10 / 2013-02-07 Users Manual / Adobe Acrobat PDF (1169 kB)
TEST REPORT
 2012-10-10 / 2012-11-05 Test Report / Adobe Acrobat PDF (350 kB)
INTERNAL PHOTOS
 2012-10-10 / 2013-02-07 Internal Photos / Adobe Acrobat PDF (3263 kB)
ANTENNA SPECIFICATIONS
 2012-10-10 / N/A Operational Description / Adobe Acrobat PDF (3230 kB)
TECHNICAL JUSTIFICATION OF NETWORKING PRIORITY
 2012-11-05 / N/A Operational Description / Adobe Acrobat PDF (262 kB)
POA
 2012-10-10 / 2012-11-05 Cover Letter(s) / Adobe Acrobat PDF (24 kB)
POA
 2012-10-10 / 2012-11-05 Cover Letter(s) / Adobe Acrobat PDF (24 kB)
TEST SETUP RF EXPOSURE
 2012-10-10 / 2013-02-07 Test Setup Photos / Adobe Acrobat PDF (122 kB)
INTERNAL PHOTOS ANTENNA LOCATION
 2012-10-10 / 2013-02-07 Internal Photos / Adobe Acrobat PDF (112 kB)
USERS MANUAL SYSTEM
 2012-10-10 / 2013-02-07 Users Manual / Adobe Acrobat PDF (679 kB)
GRANTEE HOST AGREEMENT LETTER REV
 2012-11-05 / 2012-11-05 Cover Letter(s) / Adobe Acrobat PDF (32 kB)
SHORT TERM CONFIDENTIALITY
 2012-10-10 / 2012-11-05 Cover Letter(s) / Adobe Acrobat PDF (28 kB)
C2PC LETTER
 2012-10-10 / 2012-11-05 Cover Letter(s) / Adobe Acrobat PDF (32 kB)
TEST REPORT
 2012-10-10 / 2012-11-05 Test Report / Adobe Acrobat PDF (350 kB)
RF EXPOSURE APPENDIX A AND APPENDIX B
 2012-10-10 / 2012-11-05 RF Exposure Info / Adobe Acrobat PDF (3334 kB)
USERS MANUAL MODULE
 2012-10-10 / 2013-02-07 Users Manual / Adobe Acrobat PDF (1169 kB)
LABEL SAMPLE AND LOCATION
 2012-10-10 / 2012-11-05 ID Label/Location Info / Adobe Acrobat PDF (1015 kB)
EXTERNAL PHOTOS
 2012-10-10 / 2013-02-07 External Photos / Adobe Acrobat PDF (1845 kB)
LABEL SAMPLE AND LOCATION
 2012-10-10 / 2012-11-05 ID Label/Location Info / Adobe Acrobat PDF (1015 kB)
EXTERNAL PHOTOS
 2012-10-10 / 2013-02-07 External Photos / Adobe Acrobat PDF (1845 kB)
TEST SETUP PCB
 2012-10-10 / 2013-02-07 Test Setup Photos / Adobe Acrobat PDF (153 kB)
RF EXPOSURE APPENDIX C
 2012-10-10 / 2012-11-05 RF Exposure Info / Adobe Acrobat PDF (4726 kB)
USERS MANUAL SYSTEM
 2012-10-10 / 2013-02-07 Users Manual / Adobe Acrobat PDF (679 kB)
LONG TERM CONFIDENTIALITY
 2012-10-10 / 2012-11-05 Cover Letter(s) / Adobe Acrobat PDF (29 kB)
INTERNAL PHOTOS
 2012-10-10 / 2013-02-07 Internal Photos / Adobe Acrobat PDF (3263 kB)
TEST SETUP RF EXPOSURE
 2012-10-10 / 2013-02-07 Test Setup Photos / Adobe Acrobat PDF (122 kB)
RF EXPOSURE APPENDIX A AND APPENDIX B
 2012-10-10 / 2012-11-05 RF Exposure Info / Adobe Acrobat PDF (3334 kB)
GRANTEE HOST AGREEMENT
 2012-11-05 / 2012-11-05 Cover Letter(s) / Adobe Acrobat PDF (32 kB)

APP # 2 (2012-10-09) Documents

External Photos
 2012-10-09 / 2012-10-09 External Photos / Adobe Acrobat PDF (165 kB)
External Photos
 2012-10-09 / 2012-10-09 External Photos / Adobe Acrobat PDF (165 kB)
Label Location
 2012-10-09 / 2012-10-09 ID Label/Location Info / Adobe Acrobat PDF (95 kB)
Label Location
 2012-10-09 / 2012-10-09 ID Label/Location Info / Adobe Acrobat PDF (95 kB)
Label Sample
 2012-10-09 / 2012-10-09 ID Label/Location Info / Adobe Acrobat PDF (197 kB)
Label Sample
 2012-10-09 / 2012-10-09 ID Label/Location Info / Adobe Acrobat PDF (197 kB)
Authorization Letter
 2012-10-09 / 2012-10-09 Cover Letter(s) / Adobe Acrobat PDF (26 kB)
Authorization Letter
 2012-10-09 / 2012-10-09 Cover Letter(s) / Adobe Acrobat PDF (26 kB)
Change in ID Letter
 2012-10-09 / 2012-10-09 Cover Letter(s) / Adobe Acrobat PDF (56 kB)
Change in ID Letter
 2012-10-09 / 2012-10-09 Cover Letter(s) / Adobe Acrobat PDF (56 kB)

APP # 3 (2012-10-09) Documents

Label Location
 2012-10-09 / 2012-10-09 ID Label/Location Info / Adobe Acrobat PDF (95 kB)
Label Location
 2012-10-09 / 2012-10-09 ID Label/Location Info / Adobe Acrobat PDF (95 kB)
Label Sample
 2012-10-09 / 2012-10-09 ID Label/Location Info / Adobe Acrobat PDF (197 kB)
Label Sample
 2012-10-09 / 2012-10-09 ID Label/Location Info / Adobe Acrobat PDF (197 kB)
Authorization Letter
 2012-10-09 / 2012-10-09 Cover Letter(s) / Adobe Acrobat PDF (26 kB)
Authorization Letter
 2012-10-09 / 2012-10-09 Cover Letter(s) / Adobe Acrobat PDF (26 kB)
Change in ID Letter
 2012-10-09 / 2012-10-09 Cover Letter(s) / Adobe Acrobat PDF (56 kB)
Change in ID Letter
 2012-10-09 / 2012-10-09 Cover Letter(s) / Adobe Acrobat PDF (56 kB)
External Photos
 2012-10-09 / 2012-10-09 External Photos / Adobe Acrobat PDF (165 kB)
External Photos
 2012-10-09 / 2012-10-09 External Photos / Adobe Acrobat PDF (165 kB)

Grants

TCB Grant from App #1 (2012-11-05)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 11/05/2012

Application Dated: 10/10/2012
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMC5621-D1
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: PCIe WIRELESS WAN CARD
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.77 0.1  PM 300KGXW
BC 22H 824.2  -  848.8 1.09 0.1  PM 300KG7W
BC 22H 826.4  -  846.6 0.44 0.1  PM 4M20F9W
BC 24E 1850.2  -  1909.8 0.94 0.04  PM 300KGXW
BC 24E 1850.2  -  1909.8 0.86 0.04  PM 300KG7W
BC 24E 1852.4  -  1907.6 0.49 0.04  PM 4M20F9W

Single Modular Approval. Power out is conducted at the antenna terminal. This filling only covers the device to be used for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing, except in accordance with FCC multi-transmitter product procedures. This device has been approved for use in specific co-location configurations, as described in this filing. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. Antennas used for this module must not exceed 7.2 dBi gain in the 850 MHz band and 3.5 dBi in the 1900 MHz band, for mobile and fixed operating configurations. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM/WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz and 1900 MHz operations. (Original grant date 10/09/2012)

Class II Permissive Change: This Class II Permissive Change is to have this module installed into the Dell Latitude 10 – ST2 tablet PC. The maximum measured radiated powers are 1.48W ERP and 1.64W EIRP for part 22 and 24, respectively. The highest reported SAR value is 1.41W/kg.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant from App #1 (2012-11-05)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
  Date of Grant: 11/05/2012

Application Dated: 10/10/2012
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMC5621-D1
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: PCIe WIRELESS WAN CARD
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.77 0.1  PM 300KGXW
BC 22H 824.2  -  848.8 1.09 0.1  PM 300KG7W
BC 22H 826.4  -  846.6 0.44 0.1  PM 4M20F9W
BC 24E 1850.2  -  1909.8 0.94 0.04  PM 300KGXW
BC 24E 1850.2  -  1909.8 0.86 0.04  PM 300KG7W
BC 24E 1852.4  -  1907.6 0.49 0.04  PM 4M20F9W

Single Modular Approval. Power out is conducted at the antenna terminal. This filling only covers the device to be used for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing, except in accordance with FCC multi-transmitter product procedures. This device has been approved for use in specific co-location configurations, as described in this filing. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. Antennas used for this module must not exceed 7.2 dBi gain in the 850 MHz band and 3.5 dBi in the 1900 MHz band, for mobile and fixed operating configurations. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM/WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz and 1900 MHz operations. (Original grant date 10/09/2012)

Class II Permissive Change: This Class II Permissive Change is to have this module installed into the Dell Latitude 10 – ST2 tablet PC. The maximum measured radiated powers are 1.48W ERP and 1.64W EIRP for part 22 and 24, respectively. The highest reported SAR value is 1.41W/kg.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To:


EA232708

TCB Grant from App #2 (2012-10-09)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 10/09/2012

Application Dated: 10/09/2012
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMC5621-D1
Name of Grantee:  Ericsson AB
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: PCIE WIRELESS WAN CARD
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  -       

GSM/WCDMA Modular transmitter

EAS Grant from App #2 (2012-10-09)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
  Date of Grant: 10/09/2012

Application Dated: 10/09/2012
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMC5621-D1
Name of Grantee:  Ericsson AB
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: PCIE WIRELESS WAN CARD
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  -       

GSM/WCDMA Modular transmitter



Mail To:


EA166388

TCB Grant from App #3 (2012-10-09)

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 10/09/2012

Application Dated: 10/09/2012
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMC5621-D1
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: PCIE WIRELESS WAN CARD
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.77 0.1  PM 300KGXW
BC 22H 824.2  -  848.8 1.09 0.1  PM 300KG7W
BC 22H 826.4  -  846.6 0.44 0.1  PM 4M20F9W
BC 24E 1850.2  -  1909.8 0.94 0.04  PM 300KGXW
BC 24E 1850.2  -  1909.8 0.86 0.04  PM 300KG7W
BC 24E 1852.4  -  1907.6 0.49 0.04  PM 4M20F9W

Single Modular Approval. Power out is conducted at the antenna terminal. This filling only covers the device to be used for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing, except in accordance with FCC multi-transmitter product procedures. This device has been approved for use in specific co-location configurations, as described in this filing. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance.

Antennas used for this module must not exceed 7.2 dBi gain in the 850 MHz band and 3.5 dBi in the 1900 MHz band, for mobile and fixed operating configurations. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM/WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz and 1900 MHz operations.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant from App #3 (2012-10-09)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
  Date of Grant: 10/09/2012

Application Dated: 10/09/2012
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMC5621-D1
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: PCIE WIRELESS WAN CARD
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.2  -  848.8 1.77 0.1  PM 300KGXW
BC 22H 824.2  -  848.8 1.09 0.1  PM 300KG7W
BC 22H 826.4  -  846.6 0.44 0.1  PM 4M20F9W
BC 24E 1850.2  -  1909.8 0.94 0.04  PM 300KGXW
BC 24E 1850.2  -  1909.8 0.86 0.04  PM 300KG7W
BC 24E 1852.4  -  1907.6 0.49 0.04  PM 4M20F9W

Single Modular Approval. Power out is conducted at the antenna terminal. This filling only covers the device to be used for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing, except in accordance with FCC multi-transmitter product procedures. This device has been approved for use in specific co-location configurations, as described in this filing. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance.

Antennas used for this module must not exceed 7.2 dBi gain in the 850 MHz band and 3.5 dBi in the 1900 MHz band, for mobile and fixed operating configurations. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM/WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz and 1900 MHz operations.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To:


EA206616

Applications for this FCC ID

Form App # 1 (2012-11-05)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ericsson AB
FCC Registration Number (FRN): 0017216037
Alphanumeric FCC ID: VV7MBMC5621D1
Unique Application Identifier: M3iVdvPmZ3g22EFghHn1rQ==
Line one: Mobile Broadband Modules
Line two: Lindholmspiren 11
City: Gothenburg
State: N/A
Country: Sweden
Zip Code: SE 417 56

TCB Information
TCB Application Email Address: TEI@TIMCOENGR.COM
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: VV7
Product Code: -MBMC5621-D1

Person at the applicant's address to receive grant or for contact
Name: Bernie Fuller
Title: Certification Approval Manager
Telephone Number: +46 107124371 Extension:
Fax Number: +46 107126033
Email: bernie.fuller@ericsson.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   02/07/2013
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): PCIe WIRELESS WAN CARD

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  Yes

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Sporton International Inc.
First Name:   Alex
Last Name:   Chen
Telephone Number: 886-3-327-3456 Extension: 650
Fax Number:  886-3-327-0973
E-mail:  alex@sporton.com.tw

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular Approval. Power out is conducted at the antenna terminal. This filling only covers the device to be used for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing, except in accordance with FCC multi-transmitter product procedures. This device has been approved for use in specific co-location configurations, as described in this filing. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. Antennas used for this module must not exceed 7.2 dBi gain in the 850 MHz band and 3.5 dBi in the 1900 MHz band, for mobile and fixed operating configurations. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM/WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz and 1900 MHz operations. (Original grant date 10/09/2012) Class II Permissive Change: This Class II Permissive Change is to have this module installed into the Dell Latitude 10 – ST2 tablet PC. The maximum measured radiated powers are 1.48W ERP and 1.64W EIRP for part 22 and 24, respectively. The highest reported SAR value is 1.41W/kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  JONES TSAI
Title of authorized signature: 

Form App # 2 (2012-10-09)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ericsson AB
FCC Registration Number (FRN): 0017216037
Alphanumeric FCC ID: VV7MBMC5621D1
Unique Application Identifier: mVH8OliKv7PluJ4+bzfQvg==
Line one: Mobile Broadband Modules
Line two: Lindholmspiren 11
City: Gothenburg
State: N/A
Country: Sweden
Zip Code: SE 417 56

TCB Information
TCB Application Email Address: tei@timcoengr.com
TCB Scope: A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices

FCC ID
Grantee Code: VV7
Product Code: -MBMC5621-D1

Person at the applicant's address to receive grant or for contact
Name: Bernie Fuller
Title: Certification Approval Manager
Telephone Number: +46 107124371 Extension:
Fax Number: +46 107126033
Email: bernie.fuller@ericsson.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   JBP - Part 15 Class B Computing Device Peripheral
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): PCIE WIRELESS WAN CARD

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Change in identification of presently authorized equipment. Original FCC ID: VV7-MBMC5621 Grant Date: 11/28/2011

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Sporton International Inc.
First Name:   Alex
Last Name:   Chen
Telephone Number: 886-3-327-3456 Extension: 650
Fax Number:  886-3-327-0973
E-mail:  alex@sporton.com.tw

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
GSM/WCDMA Modular transmitter
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Jones Tsai
Title of authorized signature:  Director

Form App # 3 (2012-10-09)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ericsson AB
FCC Registration Number (FRN): 0017216037
Alphanumeric FCC ID: VV7MBMC5621D1
Unique Application Identifier: yTcNTZvShj4A82wyGlQdNw==
Line one: Mobile Broadband Modules
Line two: Lindholmspiren 11
City: Gothenburg
State: N/A
Country: Sweden
Zip Code: SE 417 56

TCB Information
TCB Application Email Address: tei@timcoengr.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: VV7
Product Code: -MBMC5621-D1

Person at the applicant's address to receive grant or for contact
Name: Bernie Fuller
Title: Certification Approval Manager
Telephone Number: +46 107124371 Extension:
Fax Number: +46 107126033
Email: bernie.fuller@ericsson.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): PCIE WIRELESS WAN CARD

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Change in identification of presently authorized equipment. Original FCC ID: VV7-MBMC5621 Grant Date: 11/28/2011

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Sporton International Inc.
First Name:   Alex
Last Name:   Chen
Telephone Number: 886-3-327-3456 Extension: 650
Fax Number:  886-3-327-0973
E-mail:  alex@sporton.com.tw

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular Approval. Power out is conducted at the antenna terminal. This filling only covers the device to be used for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing, except in accordance with FCC multi-transmitter product procedures. This device has been approved for use in specific co-location configurations, as described in this filing. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. Antennas used for this module must not exceed 7.2 dBi gain in the 850 MHz band and 3.5 dBi in the 1900 MHz band, for mobile and fixed operating configurations. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM/WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz and 1900 MHz operations.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Jones Tsai
Title of authorized signature:  Director

Applications are submitted for FCC ID and Grant requests. Click an above application to view details


© FCCID.io 2025