FCC ID VV7-MBMF33072-A
VV7MBMF33072-A, VV7 MBMF33072A, VV7-MBMF33072-A, VV7-MBMF33O72-A
Ericsson AB F3307 Ericsson Mobile Broadband Module - 850/900/1800/1900 GSM/GPRS/EDGE Mini-PCIe Wireless WAN card MBMF33072-A
An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product.
For example, the grantee code for FCC ID: VV7-MBMF33072-A is VV7. The remaining characters of the FCC ID, -MBMF33072-A, are often associated with the product model, but they can be random. These letters are chosen by the applicant.
In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.
Purchase on Amazon:
F3307 Ericsson Mobile Broadband Module - 850/900/1800/1900 GSM/GPRS/EDGE Mini-PCIe Wireless WAN card
- Application: F3307 Ericsson Mobile Broadband Module - 850/900/1800/1900 GSM/GPRS/EDGE Mini-PCIe Wireless WAN card
- Equipment Class: JBP - Part 15 Class B Computing Device Peripheral
- Short Link: fcc.id/VV7-MBMF33072-A
- Sources: FCC.gov | FCC.report
- Registered By: Ericsson AB - VV7 (Sweden)
App # | Purpose | Date | Unique ID |
---|---|---|---|
1 | Change in Identification | 2009-12-21 | e1Uwe0/9UvMihtLVHQRr6w== |
2 | Change in Identification | 2009-12-21 | sUqDDzyWJ9Uca0YBb/lQtA== |
3 | Class II Permissive Change | 2010-07-16 | rz+U8A252WG4jzpSK+U6Lw== |
4 | Class II Permissive Change | 2010-10-12 | cG0QQ5GbWcYzg/8AbUwXHA== |
5 | Class II Permissive Change | 2010-10-12 | Kx9/hgymz7iKFeZoqndzcw== |
6 | Class II Permissive Change | 2011-03-11 | f2QjjrbAKQcCAnIPEwTlFQ== |
7 | Class II Permissive Change | 2011-05-11 | lcuivqGUNWwtpI8S60PxoA== |
Operating Frequencies
- Colombia Homologation [?]: VV7-MBMF33072-A
Exhibits
Available Exhibits
App # | Document | Type | Submitted Available |
---|---|---|---|
7 | SAR Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (452 kB) |
2011-05-06 2011-11-02 |
7 | Test Report | Test Report Adobe Acrobat PDF (703 kB) |
2011-05-06 2011-05-11 |
7 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (947 kB) |
2011-05-06 2011-05-11 |
7 | RF Exposure Appendix C | RF Exposure Info Adobe Acrobat PDF (2026 kB) |
2011-05-06 2011-05-11 |
7 | RF Exposure Appendix B | RF Exposure Info Adobe Acrobat PDF (219 kB) |
2011-05-06 2011-05-11 |
7 | RF Exposure Appendix A | RF Exposure Info Adobe Acrobat PDF (217 kB) |
2011-05-06 2011-05-11 |
7 | Label Sample WWAN | ID Label/Location Info Adobe Acrobat PDF (237 kB) |
2011-05-06 2011-05-11 |
7 | Label Sample WLAN | ID Label/Location Info Adobe Acrobat PDF (83 kB) |
2011-05-06 2011-05-11 |
7 | Label Sample BT | ID Label/Location Info Adobe Acrobat PDF (625 kB) |
2011-05-06 2011-05-11 |
7 | Label Location | ID Label/Location Info Adobe Acrobat PDF (55 kB) |
2011-05-06 2011-05-11 |
7 | DOC Letter | Cover Letter(s) Adobe Acrobat PDF (92 kB) |
2011-05-06 2011-05-11 |
7 | Class II Change Letter | Cover Letter(s) Adobe Acrobat PDF (69 kB) |
2011-05-06 2011-05-11 |
7 | Short Term Confidential Letter | Cover Letter(s) Adobe Acrobat PDF (715 kB) |
2011-05-06 2011-05-11 |
7 | Letter POA | Cover Letter(s) Adobe Acrobat PDF (719 kB) |
2011-05-06 2011-05-11 |
7 | Users Manual 1 | Users Manual Adobe Acrobat PDF (2207 kB) |
2011-05-06 2011-11-02 |
7 | RF Exposure Photos | Test Setup Photos Adobe Acrobat PDF (430 kB) |
2011-05-06 2011-11-02 |
7 | Internal Photos | Internal Photos Adobe Acrobat PDF (1682 kB) |
2011-05-06 2011-11-02 |
7 | Users Manual 3 | Users Manual Adobe Acrobat PDF (572 kB) |
2011-05-06 2011-11-02 |
7 | Users Manual 2 | Users Manual Adobe Acrobat PDF (1769 kB) |
2011-05-06 2011-11-02 |
7 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (87 kB) |
2011-05-06 2011-11-02 |
7 | External Photos | External Photos Adobe Acrobat PDF (1149 kB) |
2011-05-06 2011-11-02 |
6 | Test Report | Test Report Adobe Acrobat PDF (689 kB) |
2011-03-10 2011-03-11 |
6 | Label Sample WWAN | ID Label/Location Info Adobe Acrobat PDF (196 kB) |
2011-03-10 2011-03-11 |
6 | Label Sample WLAN | ID Label/Location Info Adobe Acrobat PDF (83 kB) |
2011-03-10 2011-03-11 |
6 | Label Sample BT | ID Label/Location Info Adobe Acrobat PDF (420 kB) |
2011-03-10 2011-03-11 |
6 | Label Location | ID Label/Location Info Adobe Acrobat PDF (55 kB) |
2011-03-10 2011-03-11 |
6 | Short Term Confidential Letter | Cover Letter(s) Adobe Acrobat PDF (21 kB) |
2011-03-10 2011-03-11 |
6 | Letter POA | Cover Letter(s) Adobe Acrobat PDF (47 kB) |
2011-03-10 2011-03-11 |
6 | DOC Letter | Cover Letter(s) Adobe Acrobat PDF (16 kB) |
2011-03-10 2011-03-11 |
6 | Class II Change Letter | Cover Letter(s) Adobe Acrobat PDF (21 kB) |
2011-03-10 2011-03-11 |
6 | Users Manual | Users Manual Adobe Acrobat PDF (1562 kB) |
2011-03-10 2011-09-06 |
6 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (97 kB) |
2011-03-10 2011-09-06 |
6 | Internal Photos | Internal Photos Adobe Acrobat PDF (1722 kB) |
2011-03-10 2011-09-06 |
6 | External Photos | External Photos Adobe Acrobat PDF (1252 kB) |
2011-03-10 2011-09-06 |
5 | C2PC Letter | Cover Letter(s) Adobe Acrobat PDF (16 kB) |
2010-10-12 2010-10-12 |
5 | STC Letter | Cover Letter(s) Adobe Acrobat PDF (24 kB) |
2010-10-12 2010-10-12 |
5 | Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (16 kB) |
2010-10-12 2010-10-12 |
5 | Agents Letter | Cover Letter(s) Adobe Acrobat PDF (24 kB) |
2010-10-12 2010-10-12 |
5 | RF Exposure Report II | RF Exposure Info Adobe Acrobat PDF (699 kB) |
2010-10-12 2010-10-12 |
5 | RF Exposure Report | RF Exposure Info Adobe Acrobat PDF (28 kB) |
2010-10-12 2010-10-12 |
5 | Internal Photos | Internal Photos Adobe Acrobat PDF (188 kB) |
2010-10-12 2011-04-10 |
5 | User Manual | Users Manual Adobe Acrobat PDF (506 kB) |
2010-10-12 2011-04-10 |
5 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (787 kB) |
2010-10-12 2011-04-10 |
5 | Test Report | Test Report Adobe Acrobat PDF (2070 kB) |
2010-10-12 2010-10-12 |
5 | External Photos | External Photos Adobe Acrobat PDF (162 kB) |
2010-10-12 2011-04-10 |
5 | Label II | ID Label/Location Info Adobe Acrobat PDF (28 kB) |
2010-10-12 2010-10-12 |
5 | Label | ID Label/Location Info Adobe Acrobat PDF (51 kB) |
2010-10-12 2010-10-12 |
4 | C2PC Letter | Cover Letter(s) Adobe Acrobat PDF (16 kB) |
2010-10-12 2010-10-12 |
4 | STC Letter | Cover Letter(s) Adobe Acrobat PDF (24 kB) |
2010-10-12 2010-10-12 |
4 | Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (16 kB) |
2010-10-12 2010-10-12 |
4 | Agents Letter | Cover Letter(s) Adobe Acrobat PDF (24 kB) |
2010-10-12 2010-10-12 |
4 | Internal Photos | Internal Photos Adobe Acrobat PDF (188 kB) |
2010-10-12 2011-04-10 |
4 | User Manual | Users Manual Adobe Acrobat PDF (506 kB) |
2010-10-12 2011-04-10 |
4 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (305 kB) |
2010-10-12 2011-04-10 |
4 | Test Report | Test Report Adobe Acrobat PDF (1609 kB) |
2010-10-12 2010-10-12 |
4 | External Photos | External Photos Adobe Acrobat PDF (162 kB) |
2010-10-12 2011-04-10 |
4 | Label II | ID Label/Location Info Adobe Acrobat PDF (28 kB) |
2010-10-12 2010-10-12 |
4 | Label | ID Label/Location Info Adobe Acrobat PDF (51 kB) |
2010-10-12 2010-10-12 |
3 | Cover Letter C2PC | Attestation Statements Adobe Acrobat PDF (23 kB) |
2010-07-16 2010-07-16 |
3 | Tecknical_description_and_userguide_F3307 | Users Manual Adobe Acrobat PDF (717 kB) |
2010-07-13 2010-07-16 |
3 | Technical description and User guide addendum | Users Manual Adobe Acrobat PDF (47 kB) |
2010-07-13 2010-07-16 |
3 | FCC SAR report-Photo | Test Setup Photos Adobe Acrobat PDF (161 kB) |
2010-07-13 2011-01-10 |
3 | Part 22H+24_Setup Photo | Test Setup Photos Adobe Acrobat PDF (267 kB) |
2010-07-13 2011-01-10 |
3 | Part 22H+24_Report_V02 | Test Report Adobe Acrobat PDF (321 kB) |
2010-07-13 2010-07-16 |
3 | FCC SAR report_V02 | RF Exposure Info Adobe Acrobat PDF (1930 kB) |
2010-07-13 2010-07-16 |
3 | Host Label Location_F3307-900_V01 | ID Label/Location Info Adobe Acrobat PDF (27 kB) |
2010-07-13 2010-07-16 |
3 | Internal Photo_V01 | Internal Photos Adobe Acrobat PDF (738 kB) |
2010-07-13 2011-01-10 |
3 | External Photo | External Photos Adobe Acrobat PDF (626 kB) |
2010-07-13 2011-01-10 |
3 | Confidentiality request_F3307 _3_ | Cover Letter(s) Adobe Acrobat PDF (25 kB) |
2010-07-13 2010-07-16 |
3 | Authorization Letter _4_ | Cover Letter(s) Adobe Acrobat PDF (22 kB) |
2010-07-13 2010-07-16 |
3 | C2PC letter - VV7-MBM33072-A | Cover Letter(s) Adobe Acrobat PDF (44 kB) |
2010-07-12 2010-07-16 |
1 | STC Letter | Cover Letter(s) Adobe Acrobat PDF (55 kB) |
2009-12-21 2009-12-21 |
1 | Agent Letter | Cover Letter(s) Adobe Acrobat PDF (68 kB) |
2009-12-21 2009-12-21 |
1 | Change ID Letter | Cover Letter(s) Adobe Acrobat PDF (51 kB) |
2009-12-21 2009-12-21 |
1 | External Photos | External Photos Adobe Acrobat PDF (95 kB) |
2009-12-21 2010-06-19 |
1 | Label 2 | ID Label/Location Info Adobe Acrobat PDF (26 kB) |
2009-12-21 2009-12-21 |
1 | Label 1 | ID Label/Location Info Adobe Acrobat PDF (94 kB) |
2009-12-21 2009-12-21 |
2 | STC Letter | Cover Letter(s) Adobe Acrobat PDF (55 kB) |
2009-12-21 2009-12-21 |
2 | Agent Letter | Cover Letter(s) Adobe Acrobat PDF (68 kB) |
2009-12-21 2009-12-21 |
2 | Change ID Letter | Cover Letter(s) Adobe Acrobat PDF (51 kB) |
2009-12-21 2009-12-21 |
2 | External Photos | External Photos Adobe Acrobat PDF (95 kB) |
2009-12-21 2010-06-19 |
2 | Label 2 | ID Label/Location Info Adobe Acrobat PDF (26 kB) |
2009-12-21 2009-12-21 |
2 | Label 1 | ID Label/Location Info Adobe Acrobat PDF (94 kB) |
2009-12-21 2009-12-21 |
APP # 7 (2011-05-11)
App # | Document | Type | Submitted Available |
---|---|---|---|
7 | SAR Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (452 kB) |
2011-05-06 00:00:00 2011-11-02 00:00:00 |
7 | Test Report | Test Report Adobe Acrobat PDF (703 kB) |
2011-05-06 00:00:00 2011-05-11 00:00:00 |
7 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (947 kB) |
2011-05-06 00:00:00 2011-05-11 00:00:00 |
7 | RF Exposure Appendix C | RF Exposure Info Adobe Acrobat PDF (2026 kB) |
2011-05-06 00:00:00 2011-05-11 00:00:00 |
7 | RF Exposure Appendix B | RF Exposure Info Adobe Acrobat PDF (219 kB) |
2011-05-06 00:00:00 2011-05-11 00:00:00 |
7 | RF Exposure Appendix A | RF Exposure Info Adobe Acrobat PDF (217 kB) |
2011-05-06 00:00:00 2011-05-11 00:00:00 |
7 | Label Sample WWAN | ID Label/Location Info Adobe Acrobat PDF (237 kB) |
2011-05-06 00:00:00 2011-05-11 00:00:00 |
7 | Label Sample WLAN | ID Label/Location Info Adobe Acrobat PDF (83 kB) |
2011-05-06 00:00:00 2011-05-11 00:00:00 |
7 | Label Sample BT | ID Label/Location Info Adobe Acrobat PDF (625 kB) |
2011-05-06 00:00:00 2011-05-11 00:00:00 |
7 | Label Location | ID Label/Location Info Adobe Acrobat PDF (55 kB) |
2011-05-06 00:00:00 2011-05-11 00:00:00 |
7 | DOC Letter | Cover Letter(s) Adobe Acrobat PDF (92 kB) |
2011-05-06 00:00:00 2011-05-11 00:00:00 |
7 | Class II Change Letter | Cover Letter(s) Adobe Acrobat PDF (69 kB) |
2011-05-06 00:00:00 2011-05-11 00:00:00 |
7 | Short Term Confidential Letter | Cover Letter(s) Adobe Acrobat PDF (715 kB) |
2011-05-06 00:00:00 2011-05-11 00:00:00 |
7 | Letter POA | Cover Letter(s) Adobe Acrobat PDF (719 kB) |
2011-05-06 00:00:00 2011-05-11 00:00:00 |
7 | Users Manual 1 | Users Manual Adobe Acrobat PDF (2207 kB) |
2011-05-06 00:00:00 2011-11-02 00:00:00 |
7 | RF Exposure Photos | Test Setup Photos Adobe Acrobat PDF (430 kB) |
2011-05-06 00:00:00 2011-11-02 00:00:00 |
7 | Internal Photos | Internal Photos Adobe Acrobat PDF (1682 kB) |
2011-05-06 00:00:00 2011-11-02 00:00:00 |
7 | Users Manual 3 | Users Manual Adobe Acrobat PDF (572 kB) |
2011-05-06 00:00:00 2011-11-02 00:00:00 |
7 | Users Manual 2 | Users Manual Adobe Acrobat PDF (1769 kB) |
2011-05-06 00:00:00 2011-11-02 00:00:00 |
7 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (87 kB) |
2011-05-06 00:00:00 2011-11-02 00:00:00 |
7 | External Photos | External Photos Adobe Acrobat PDF (1149 kB) |
2011-05-06 00:00:00 2011-11-02 00:00:00 |
APP # 6 (2011-03-11)
App # | Document | Type | Submitted Available |
---|---|---|---|
6 | Test Report | Test Report Adobe Acrobat PDF (689 kB) |
2011-03-10 00:00:00 2011-03-11 00:00:00 |
6 | Label Sample WWAN | ID Label/Location Info Adobe Acrobat PDF (196 kB) |
2011-03-10 00:00:00 2011-03-11 00:00:00 |
6 | Label Sample WLAN | ID Label/Location Info Adobe Acrobat PDF (83 kB) |
2011-03-10 00:00:00 2011-03-11 00:00:00 |
6 | Label Sample BT | ID Label/Location Info Adobe Acrobat PDF (420 kB) |
2011-03-10 00:00:00 2011-03-11 00:00:00 |
6 | Label Location | ID Label/Location Info Adobe Acrobat PDF (55 kB) |
2011-03-10 00:00:00 2011-03-11 00:00:00 |
6 | Short Term Confidential Letter | Cover Letter(s) Adobe Acrobat PDF (21 kB) |
2011-03-10 00:00:00 2011-03-11 00:00:00 |
6 | Letter POA | Cover Letter(s) Adobe Acrobat PDF (47 kB) |
2011-03-10 00:00:00 2011-03-11 00:00:00 |
6 | DOC Letter | Cover Letter(s) Adobe Acrobat PDF (16 kB) |
2011-03-10 00:00:00 2011-03-11 00:00:00 |
6 | Class II Change Letter | Cover Letter(s) Adobe Acrobat PDF (21 kB) |
2011-03-10 00:00:00 2011-03-11 00:00:00 |
6 | Users Manual | Users Manual Adobe Acrobat PDF (1562 kB) |
2011-03-10 00:00:00 2011-09-06 00:00:00 |
6 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (97 kB) |
2011-03-10 00:00:00 2011-09-06 00:00:00 |
6 | Internal Photos | Internal Photos Adobe Acrobat PDF (1722 kB) |
2011-03-10 00:00:00 2011-09-06 00:00:00 |
6 | External Photos | External Photos Adobe Acrobat PDF (1252 kB) |
2011-03-10 00:00:00 2011-09-06 00:00:00 |
APP # 5 (2010-10-12)
App # | Document | Type | Submitted Available |
---|---|---|---|
5 | C2PC Letter | Cover Letter(s) Adobe Acrobat PDF (16 kB) |
2010-10-12 00:00:00 2010-10-12 00:00:00 |
5 | STC Letter | Cover Letter(s) Adobe Acrobat PDF (24 kB) |
2010-10-12 00:00:00 2010-10-12 00:00:00 |
5 | Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (16 kB) |
2010-10-12 00:00:00 2010-10-12 00:00:00 |
5 | Agents Letter | Cover Letter(s) Adobe Acrobat PDF (24 kB) |
2010-10-12 00:00:00 2010-10-12 00:00:00 |
5 | RF Exposure Report II | RF Exposure Info Adobe Acrobat PDF (699 kB) |
2010-10-12 00:00:00 2010-10-12 00:00:00 |
5 | RF Exposure Report | RF Exposure Info Adobe Acrobat PDF (28 kB) |
2010-10-12 00:00:00 2010-10-12 00:00:00 |
5 | Internal Photos | Internal Photos Adobe Acrobat PDF (188 kB) |
2010-10-12 00:00:00 2011-04-10 00:00:00 |
5 | User Manual | Users Manual Adobe Acrobat PDF (506 kB) |
2010-10-12 00:00:00 2011-04-10 00:00:00 |
5 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (787 kB) |
2010-10-12 00:00:00 2011-04-10 00:00:00 |
5 | Test Report | Test Report Adobe Acrobat PDF (2070 kB) |
2010-10-12 00:00:00 2010-10-12 00:00:00 |
5 | External Photos | External Photos Adobe Acrobat PDF (162 kB) |
2010-10-12 00:00:00 2011-04-10 00:00:00 |
5 | Label II | ID Label/Location Info Adobe Acrobat PDF (28 kB) |
2010-10-12 00:00:00 2010-10-12 00:00:00 |
5 | Label | ID Label/Location Info Adobe Acrobat PDF (51 kB) |
2010-10-12 00:00:00 2010-10-12 00:00:00 |
APP # 4 (2010-10-12)
App # | Document | Type | Submitted Available |
---|---|---|---|
4 | C2PC Letter | Cover Letter(s) Adobe Acrobat PDF (16 kB) |
2010-10-12 00:00:00 2010-10-12 00:00:00 |
4 | STC Letter | Cover Letter(s) Adobe Acrobat PDF (24 kB) |
2010-10-12 00:00:00 2010-10-12 00:00:00 |
4 | Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (16 kB) |
2010-10-12 00:00:00 2010-10-12 00:00:00 |
4 | Agents Letter | Cover Letter(s) Adobe Acrobat PDF (24 kB) |
2010-10-12 00:00:00 2010-10-12 00:00:00 |
4 | Internal Photos | Internal Photos Adobe Acrobat PDF (188 kB) |
2010-10-12 00:00:00 2011-04-10 00:00:00 |
4 | User Manual | Users Manual Adobe Acrobat PDF (506 kB) |
2010-10-12 00:00:00 2011-04-10 00:00:00 |
4 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (305 kB) |
2010-10-12 00:00:00 2011-04-10 00:00:00 |
4 | Test Report | Test Report Adobe Acrobat PDF (1609 kB) |
2010-10-12 00:00:00 2010-10-12 00:00:00 |
4 | External Photos | External Photos Adobe Acrobat PDF (162 kB) |
2010-10-12 00:00:00 2011-04-10 00:00:00 |
4 | Label II | ID Label/Location Info Adobe Acrobat PDF (28 kB) |
2010-10-12 00:00:00 2010-10-12 00:00:00 |
4 | Label | ID Label/Location Info Adobe Acrobat PDF (51 kB) |
2010-10-12 00:00:00 2010-10-12 00:00:00 |
APP # 3 (2010-07-16)
App # | Document | Type | Submitted Available |
---|---|---|---|
3 | Cover Letter C2PC | Attestation Statements Adobe Acrobat PDF (23 kB) |
2010-07-16 00:00:00 2010-07-16 00:00:00 |
3 | Tecknical_description_and_userguide_F3307 | Users Manual Adobe Acrobat PDF (717 kB) |
2010-07-13 00:00:00 2010-07-16 00:00:00 |
3 | Technical description and User guide addendum | Users Manual Adobe Acrobat PDF (47 kB) |
2010-07-13 00:00:00 2010-07-16 00:00:00 |
3 | FCC SAR report-Photo | Test Setup Photos Adobe Acrobat PDF (161 kB) |
2010-07-13 00:00:00 2011-01-10 00:00:00 |
3 | Part 22H+24_Setup Photo | Test Setup Photos Adobe Acrobat PDF (267 kB) |
2010-07-13 00:00:00 2011-01-10 00:00:00 |
3 | Part 22H+24_Report_V02 | Test Report Adobe Acrobat PDF (321 kB) |
2010-07-13 00:00:00 2010-07-16 00:00:00 |
3 | FCC SAR report_V02 | RF Exposure Info Adobe Acrobat PDF (1930 kB) |
2010-07-13 00:00:00 2010-07-16 00:00:00 |
3 | Host Label Location_F3307-900_V01 | ID Label/Location Info Adobe Acrobat PDF (27 kB) |
2010-07-13 00:00:00 2010-07-16 00:00:00 |
3 | Internal Photo_V01 | Internal Photos Adobe Acrobat PDF (738 kB) |
2010-07-13 00:00:00 2011-01-10 00:00:00 |
3 | External Photo | External Photos Adobe Acrobat PDF (626 kB) |
2010-07-13 00:00:00 2011-01-10 00:00:00 |
3 | Confidentiality request_F3307 _3_ | Cover Letter(s) Adobe Acrobat PDF (25 kB) |
2010-07-13 00:00:00 2010-07-16 00:00:00 |
3 | Authorization Letter _4_ | Cover Letter(s) Adobe Acrobat PDF (22 kB) |
2010-07-13 00:00:00 2010-07-16 00:00:00 |
3 | C2PC letter - VV7-MBM33072-A | Cover Letter(s) Adobe Acrobat PDF (44 kB) |
2010-07-12 00:00:00 2010-07-16 00:00:00 |
APP # 1 (2009-12-21)
App # | Document | Type | Submitted Available |
---|---|---|---|
1 | STC Letter | Cover Letter(s) Adobe Acrobat PDF (55 kB) |
2009-12-21 00:00:00 2009-12-21 00:00:00 |
1 | Agent Letter | Cover Letter(s) Adobe Acrobat PDF (68 kB) |
2009-12-21 00:00:00 2009-12-21 00:00:00 |
1 | Change ID Letter | Cover Letter(s) Adobe Acrobat PDF (51 kB) |
2009-12-21 00:00:00 2009-12-21 00:00:00 |
1 | External Photos | External Photos Adobe Acrobat PDF (95 kB) |
2009-12-21 00:00:00 2010-06-19 00:00:00 |
1 | Label 2 | ID Label/Location Info Adobe Acrobat PDF (26 kB) |
2009-12-21 00:00:00 2009-12-21 00:00:00 |
1 | Label 1 | ID Label/Location Info Adobe Acrobat PDF (94 kB) |
2009-12-21 00:00:00 2009-12-21 00:00:00 |
APP # 2 (2009-12-21)
App # | Document | Type | Submitted Available |
---|---|---|---|
2 | STC Letter | Cover Letter(s) Adobe Acrobat PDF (55 kB) |
2009-12-21 00:00:00 2009-12-21 00:00:00 |
2 | Agent Letter | Cover Letter(s) Adobe Acrobat PDF (68 kB) |
2009-12-21 00:00:00 2009-12-21 00:00:00 |
2 | Change ID Letter | Cover Letter(s) Adobe Acrobat PDF (51 kB) |
2009-12-21 00:00:00 2009-12-21 00:00:00 |
2 | External Photos | External Photos Adobe Acrobat PDF (95 kB) |
2009-12-21 00:00:00 2010-06-19 00:00:00 |
2 | Label 2 | ID Label/Location Info Adobe Acrobat PDF (26 kB) |
2009-12-21 00:00:00 2009-12-21 00:00:00 |
2 | Label 1 | ID Label/Location Info Adobe Acrobat PDF (94 kB) |
2009-12-21 00:00:00 2009-12-21 00:00:00 |
APP # 5 (2010-10-12)
App # | Document | Type | Submitted Available |
---|---|---|---|
5 | Operating Description HW Changes | Operational Description Adobe Acrobat PDF (46 kB) |
2010-10-12 00:00:00 N/A |
APP # 4 (2010-10-12)
App # | Document | Type | Submitted Available |
---|---|---|---|
4 | Operating Description | Operational Description Adobe Acrobat PDF (506 kB) |
2010-10-12 00:00:00 N/A |
4 | Block Diagram | Block Diagram Adobe Acrobat PDF (31 kB) |
2010-10-12 00:00:00 N/A |
APP # 5 (2010-10-12)
App # | Document | Type | Submitted Available |
---|---|---|---|
5 | Schematics | Schematics Adobe Acrobat PDF (836 kB) |
2010-10-12 00:00:00 N/A |
5 | Operating Description | Operational Description Adobe Acrobat PDF (506 kB) |
2010-10-12 00:00:00 N/A |
5 | Block Diagram | Block Diagram Adobe Acrobat PDF (31 kB) |
2010-10-12 00:00:00 N/A |
5 | Tune Up | Parts List/Tune Up Info Adobe Acrobat PDF (35 kB) |
2010-10-12 00:00:00 N/A |
APP # 3 (2010-07-16)
App # | Document | Type | Submitted Available |
---|---|---|---|
3 | Antenna Information | Operational Description Adobe Acrobat PDF (544 kB) |
2010-07-13 00:00:00 N/A |
APP # 5 (2010-10-12)
App # | Document | Type | Submitted Available |
---|---|---|---|
5 | Parts List | Parts List/Tune Up Info Adobe Acrobat PDF (12 kB) |
2010-10-12 00:00:00 N/A |
APP # 4 (2010-10-12)
App # | Document | Type | Submitted Available |
---|---|---|---|
4 | Operating Description HW Changes | Operational Description Adobe Acrobat PDF (46 kB) |
2010-10-12 00:00:00 N/A |
Correspondence
All Correspondence
App # | Document | Date |
---|---|---|
6 | [Re-Sent]Short-Term Confidential Expiration Email generated [Aug 29 2011] | 2011-08-29 09:48:58 oeteascv |
6 | [Re-Sent]Short-Term Confidential Expiration Email generated [Aug 29 2011] | 2011-08-29 09:49:49 oeteascv |
7 | [Re-Sent]Short-Term Confidential Expiration Email generated [Oct 25 2011] | 2011-10-25 10:28:03 oeteascv |
7 | [Re-Sent]Short-Term Confidential Expiration Email generated [Oct 25 2011] | 2011-10-25 10:32:49 oeteascv |
3 | [Re-Sent]Short-Term Confidential Expiration Email generated [Jan 2 2011] | 2011-01-02 06:11:11 |
3 | [Re-Sent]Short-Term Confidential Expiration Email generated [Jan 2 2011] | 2011-01-02 06:24:42 |
APP # 6 (2011-03-11)
App # | Document | Type |
---|---|---|
6 | [Re-Sent]Short-Term Confidential Expiration Email generated [Aug 29 2011] | 2011-08-29 09:48:58 oeteascv |
6 | [Re-Sent]Short-Term Confidential Expiration Email generated [Aug 29 2011] | 2011-08-29 09:49:49 oeteascv |
APP # 7 (2011-05-11)
App # | Document | Type |
---|---|---|
7 | [Re-Sent]Short-Term Confidential Expiration Email generated [Oct 25 2011] | 2011-10-25 10:28:03 oeteascv |
7 | [Re-Sent]Short-Term Confidential Expiration Email generated [Oct 25 2011] | 2011-10-25 10:32:49 oeteascv |
APP # 3 (2010-07-16)
App # | Document | Type |
---|---|---|
3 | [Re-Sent]Short-Term Confidential Expiration Email generated [Jan 2 2011] | 2011-01-02 06:11:11 |
3 | [Re-Sent]Short-Term Confidential Expiration Email generated [Jan 2 2011] | 2011-01-02 06:24:42 |
Application Forms
Application for Equipment Authorization FCC Form 731 TCB Version |
Application for Equipment Authorization FCC Form 731 TCB Version |
Application for Equipment Authorization FCC Form 731 TCB Version |
Application for Equipment Authorization FCC Form 731 TCB Version |
Application for Equipment Authorization FCC Form 731 TCB Version |
Application for Equipment Authorization FCC Form 731 TCB Version |
Application for Equipment Authorization FCC Form 731 TCB Version |
Applications are submitted for FCC ID and Grant requests. Click an above application to view details
Grants
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 10/12/2010 |
Ericsson AB |
Mobile Broadband Modules |
Lindholmspiren 11 |
Gothenburg, SE 417 56 Sweden |
Attention: Bernie Fuller , Certification Approval Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | VV7-MBMF33072-A |
Name of Grantee: | Ericsson AB |
Equipment Class: | Part 15 Class B Computing Device Peripheral |
Notes: | F3307 Ericsson Mobile Broadband Module - 850/900/1800/1900 GSM/GPRS/EDGE Mini-PCIe Wireless WAN card |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
15B | - |
Single Modular Approval. Class II permissive change filing for changes as detailed in this filing. This device is approved for use in specific co-located configurations in generic host platforms as described in this filing. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
Ericsson AB Mobile Broadband Modules Lindholmspiren 11 Gothenburg, SE 417 56 Sweden |
Date of Grant: 10/12/2010 |
Attention: Bernie Fuller , Certification Approval Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | VV7-MBMF33072-A |
Name of Grantee: | Ericsson AB |
Equipment Class: | Part 15 Class B Computing Device Peripheral |
Notes: | F3307 Ericsson Mobile Broadband Module - 850/900/1800/1900 GSM/GPRS/EDGE Mini-PCIe Wireless WAN card |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
15B | - |
Single Modular Approval. Class II permissive change filing for changes as detailed in this filing. This device is approved for use in specific co-located configurations in generic host platforms as described in this filing. |
Mail To: |
EA595805 |
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 12/21/2009 |
Ericsson AB |
Mobile Broadband Modules |
Lindholmspiren 11 |
Gothenburg, SE 417 56 Sweden |
Attention: Bernie Fuller , Certification Approval Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | VV7-MBMF33072-A |
Name of Grantee: | Ericsson AB |
Equipment Class: | Part 15 Class B Computing Device Peripheral |
Notes: | F3307 Ericsson Mobile Broadband Module - 850/900/1800/1900 GSM/GPRS/EDGE Mini-PCIe Wireless WAN card |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
15B | - |
Single Modular Approval.. This device is approved for use in specific co-located configurations in generic host platforms as described in this filing. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
Ericsson AB Mobile Broadband Modules Lindholmspiren 11 Gothenburg, SE 417 56 Sweden |
Date of Grant: 12/21/2009 |
Attention: Bernie Fuller , Certification Approval Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | VV7-MBMF33072-A |
Name of Grantee: | Ericsson AB |
Equipment Class: | Part 15 Class B Computing Device Peripheral |
Notes: | F3307 Ericsson Mobile Broadband Module - 850/900/1800/1900 GSM/GPRS/EDGE Mini-PCIe Wireless WAN card |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
15B | - |
Single Modular Approval.. This device is approved for use in specific co-located configurations in generic host platforms as described in this filing. |
Mail To: |
EA250328 |
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 03/11/2011 |
Ericsson AB |
Mobile Broadband Modules |
Lindholmspiren 11 |
Gothenburg, SE 417 56 Sweden |
Attention: Bernie Fuller , Certification Approval Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | VV7-MBMF33072-A |
Name of Grantee: | Ericsson AB |
Equipment Class: | PCS Licensed Transmitter |
Notes: | F3307 ERICSSON MOBILE BROADBAND MODULE-850/900/1800/1900 GSM/GPRS/EDGE MINI-PCIE WIRELESS WAN CARD |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
22H | 824.2 - 848.8 | 2.24 | 0.0323 PM | 300KGXW | |
22H | 824.2 - 848.8 | 2.24 | 0.043 PM | 300KG7W | |
24E | 1850.2 - 1909.8 | 1.03 | 0.0372 PM | 300KGXW | |
24E | 1850.2 - 1909.8 | 1.02 | 0.0314 PM | 300KG7W |
Single Modular Approval. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.02 dBi in the 850 MHz Cellular band and 9.85 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. This device is approved for use in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.90 dBi in the 850 MHz Cellular band and 4.98 dBi in the PCS 1900 MHz band. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. (Date: 12/21/2009) --------------------------------------- Single Modular Approval. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed that documented in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. This C2PC adds a new laptop host configuration model NAV70. This device was evaluated for collocation with approved Bluetooth module FCC ID: MCLBCM92046 and WLAN module FCC ID: HLZ-AR5B95 or QDS-BRCM1050. This module must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The highest reported Body SAR is 0.051 W/kg. (Date: 07/16/2010) ----------------------------------------------------------
Single Modular Approval. Class II permissive change filing for changes as detailed in this filing. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 6.93 dBi in the 850 MHz Cellular band and 2.90 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. This device is approved for use in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.35 dBi in the 850 MHz Cellular band and 2.90 dBi in the PCS 1900 MHz band. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. (Date: 10/12/2010) ------------------------------------------------------------------ Class II Change: This Class II Change adds a new laptop host configuration Ericsson/Model F3307. This device was evaluated for collocation with approved Bluetooth module FCC ID: MCLBCM92046 and WLAN module FCC ID: HLZ-AR5B95 in the new Host with Model Names: ZQ1B, Zq1C, ZQ1, ZQ1A, with Trade Names: Acer, Gateway, and Packard Bell. This module must be installed by the OEM or OEM integrator only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions for end-users and installers to satisfy RF exposure compliance requirements. Radiated Output Power Measurements were: Part 22H ERP: 0.89W, Part 24E EIRP: 1.21W. (Date: 03/11/2011)
|
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
Ericsson AB Mobile Broadband Modules Lindholmspiren 11 Gothenburg, SE 417 56 Sweden |
Date of Grant: 03/11/2011 |
Attention: Bernie Fuller , Certification Approval Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | VV7-MBMF33072-A |
Name of Grantee: | Ericsson AB |
Equipment Class: | PCS Licensed Transmitter |
Notes: | F3307 ERICSSON MOBILE BROADBAND MODULE-850/900/1800/1900 GSM/GPRS/EDGE MINI-PCIE WIRELESS WAN CARD |
Modular Type: | Does not apply |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
22H | 824.2 - 848.8 | 2.24 | 0.0323 PM | 300KGXW | |
22H | 824.2 - 848.8 | 2.24 | 0.043 PM | 300KG7W | |
24E | 1850.2 - 1909.8 | 1.03 | 0.0372 PM | 300KGXW | |
24E | 1850.2 - 1909.8 | 1.02 | 0.0314 PM | 300KG7W |
Single Modular Approval. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.02 dBi in the 850 MHz Cellular band and 9.85 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. This device is approved for use in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.90 dBi in the 850 MHz Cellular band and 4.98 dBi in the PCS 1900 MHz band. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. (Date: 12/21/2009) --------------------------------------- Single Modular Approval. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed that documented in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. This C2PC adds a new laptop host configuration model NAV70. This device was evaluated for collocation with approved Bluetooth module FCC ID: MCLBCM92046 and WLAN module FCC ID: HLZ-AR5B95 or QDS-BRCM1050. This module must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The highest reported Body SAR is 0.051 W/kg. (Date: 07/16/2010) ----------------------------------------------------------
Single Modular Approval. Class II permissive change filing for changes as detailed in this filing. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 6.93 dBi in the 850 MHz Cellular band and 2.90 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. This device is approved for use in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.35 dBi in the 850 MHz Cellular band and 2.90 dBi in the PCS 1900 MHz band. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. (Date: 10/12/2010) ------------------------------------------------------------------ Class II Change: This Class II Change adds a new laptop host configuration Ericsson/Model F3307. This device was evaluated for collocation with approved Bluetooth module FCC ID: MCLBCM92046 and WLAN module FCC ID: HLZ-AR5B95 in the new Host with Model Names: ZQ1B, Zq1C, ZQ1, ZQ1A, with Trade Names: Acer, Gateway, and Packard Bell. This module must be installed by the OEM or OEM integrator only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions for end-users and installers to satisfy RF exposure compliance requirements. Radiated Output Power Measurements were: Part 22H ERP: 0.89W, Part 24E EIRP: 1.21W. (Date: 03/11/2011)
|
Mail To: |
EA655242 |
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 10/12/2010 |
Ericsson AB |
Mobile Broadband Modules |
Lindholmspiren 11 |
Gothenburg, SE 417 56 Sweden |
Attention: Bernie Fuller , Certification Approval Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | VV7-MBMF33072-A |
Name of Grantee: | Ericsson AB |
Equipment Class: | PCS Licensed Transmitter |
Notes: | F3307 Ericsson Mobile Broadband Module - 850/900/1800/1900 GSM/GPRS/EDGE Mini-PCIe Wireless WAN card |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
22H | 824.2 - 848.8 | 2.24 | 0.0323 PM | 300KGXW | |
22H | 824.2 - 848.8 | 2.24 | 0.043 PM | 300KG7W | |
24E | 1850.2 - 1909.8 | 1.03 | 0.0372 PM | 300KGXW | |
24E | 1850.2 - 1909.8 | 1.02 | 0.0314 PM | 300KG7W |
Single Modular Approval. Class II permissive change filing for changes as detailed in this filing. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 6.93 dBi in the 850 MHz Cellular band and 2.90 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. This device is approved for use in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.35 dBi in the 850 MHz Cellular band and 2.90 dBi in the PCS 1900 MHz band. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
Ericsson AB Mobile Broadband Modules Lindholmspiren 11 Gothenburg, SE 417 56 Sweden |
Date of Grant: 10/12/2010 |
Attention: Bernie Fuller , Certification Approval Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | VV7-MBMF33072-A |
Name of Grantee: | Ericsson AB |
Equipment Class: | PCS Licensed Transmitter |
Notes: | F3307 Ericsson Mobile Broadband Module - 850/900/1800/1900 GSM/GPRS/EDGE Mini-PCIe Wireless WAN card |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
22H | 824.2 - 848.8 | 2.24 | 0.0323 PM | 300KGXW | |
22H | 824.2 - 848.8 | 2.24 | 0.043 PM | 300KG7W | |
24E | 1850.2 - 1909.8 | 1.03 | 0.0372 PM | 300KGXW | |
24E | 1850.2 - 1909.8 | 1.02 | 0.0314 PM | 300KG7W |
Single Modular Approval. Class II permissive change filing for changes as detailed in this filing. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 6.93 dBi in the 850 MHz Cellular band and 2.90 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. This device is approved for use in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.35 dBi in the 850 MHz Cellular band and 2.90 dBi in the PCS 1900 MHz band. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. |
Mail To: |
EA363021 |
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 05/11/2011 |
Ericsson AB |
Mobile Broadband Modules |
Lindholmspiren 11 |
Gothenburg, SE 417 56 Sweden |
Attention: Bernie Fuller , Certification Approval Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | VV7-MBMF33072-A |
Name of Grantee: | Ericsson AB |
Equipment Class: | PCS Licensed Transmitter |
Notes: | F3307 ERICSSON MOBILE BROADBAND MODULE-850/900/1800/1900 GSM/GPRS/EDGE MINI-PCIE WIRELESS WAN CARD |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
22H | 824.2 - 848.8 | 2.24 | 0.0323 PM | 300KGXW | |
22H | 824.2 - 848.8 | 2.24 | 0.043 PM | 300KG7W | |
24E | 1850.2 - 1909.8 | 1.03 | 0.0372 PM | 300KGXW | |
24E | 1850.2 - 1909.8 | 1.02 | 0.0314 PM | 300KG7W |
Single Modular Approval. Class II permissive change filing for changes as detailed in this filing. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 6.93 dBi in the 850 MHz Cellular band and 2.90 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. This device is approved for use in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.35 dBi in the 850 MHz Cellular band and 2.90 dBi in the PCS 1900 MHz band. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. (Date: 10/12/2010) Class II Change: This Class II Change adds a new laptop host configuration models PAV70 and PAV80 under the trade names Acer, Gateway, and Packard Bell. This device was evaluated for collocation with approved Bluetooth module FCC ID: PPDT77H056 and WLAN module FCC ID: HLZ-AR5B95. The maximum measured ERP for Part 22H is: 0.34W. The maximum measured EIRP for Part 24: 0.66W. The highest reported Body SAR is: 0.07 W/kg. (05/06/2011) |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
Ericsson AB Mobile Broadband Modules Lindholmspiren 11 Gothenburg, SE 417 56 Sweden |
Date of Grant: 05/11/2011 |
Attention: Bernie Fuller , Certification Approval Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | VV7-MBMF33072-A |
Name of Grantee: | Ericsson AB |
Equipment Class: | PCS Licensed Transmitter |
Notes: | F3307 ERICSSON MOBILE BROADBAND MODULE-850/900/1800/1900 GSM/GPRS/EDGE MINI-PCIE WIRELESS WAN CARD |
Modular Type: | Does not apply |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
22H | 824.2 - 848.8 | 2.24 | 0.0323 PM | 300KGXW | |
22H | 824.2 - 848.8 | 2.24 | 0.043 PM | 300KG7W | |
24E | 1850.2 - 1909.8 | 1.03 | 0.0372 PM | 300KGXW | |
24E | 1850.2 - 1909.8 | 1.02 | 0.0314 PM | 300KG7W |
Single Modular Approval. Class II permissive change filing for changes as detailed in this filing. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 6.93 dBi in the 850 MHz Cellular band and 2.90 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. This device is approved for use in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.35 dBi in the 850 MHz Cellular band and 2.90 dBi in the PCS 1900 MHz band. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. (Date: 10/12/2010) Class II Change: This Class II Change adds a new laptop host configuration models PAV70 and PAV80 under the trade names Acer, Gateway, and Packard Bell. This device was evaluated for collocation with approved Bluetooth module FCC ID: PPDT77H056 and WLAN module FCC ID: HLZ-AR5B95. The maximum measured ERP for Part 22H is: 0.34W. The maximum measured EIRP for Part 24: 0.66W. The highest reported Body SAR is: 0.07 W/kg. (05/06/2011) |
Mail To: |
EA637818 |
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/16/2010 |
Ericsson AB |
Mobile Broadband Modules |
Lindholmspiren 11 |
Gothenburg, SE 417 56 Sweden |
Attention: Bernie Fuller , Certification Approval Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | VV7-MBMF33072-A |
Name of Grantee: | Ericsson AB |
Equipment Class: | PCS Licensed Transmitter |
Notes: | 3.5G Wireless PCI Express Module |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
22H | 824.2 - 848.8 | 2.24 | 0.0287 PM | 300KGXW | |
24E | 1850.2 - 1909.8 | 1.03 | 0.041 PM | 300KGXW | |
22H | 824.2 - 848.8 | 2.24 | 0.0311 PM | 300KG7W | |
24E | 1850.2 - 1909.8 | 1.02 | 0.0218 PM | 300KG7W |
Single Modular Approval. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed that documented in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. Thisdevice contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. This C2PC adds a new laptop host configuration model NAV70. This device was evaluated for collocation with approved Bluetooth module FCC ID: MCLBCM92046 and WLAN module FCC ID: HLZ-AR5B95 or QDS-BRCM1050. This module must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The highest reported Body SAR is 0.051 W/kg. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
Ericsson AB Mobile Broadband Modules Lindholmspiren 11 Gothenburg, SE 417 56 Sweden |
Date of Grant: 07/16/2010 |
Attention: Bernie Fuller , Certification Approval Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | VV7-MBMF33072-A |
Name of Grantee: | Ericsson AB |
Equipment Class: | PCS Licensed Transmitter |
Notes: | 3.5G Wireless PCI Express Module |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
22H | 824.2 - 848.8 | 2.24 | 0.0287 PM | 300KGXW | |
24E | 1850.2 - 1909.8 | 1.03 | 0.041 PM | 300KGXW | |
22H | 824.2 - 848.8 | 2.24 | 0.0311 PM | 300KG7W | |
24E | 1850.2 - 1909.8 | 1.02 | 0.0218 PM | 300KG7W |
Single Modular Approval. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed that documented in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. Thisdevice contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. This C2PC adds a new laptop host configuration model NAV70. This device was evaluated for collocation with approved Bluetooth module FCC ID: MCLBCM92046 and WLAN module FCC ID: HLZ-AR5B95 or QDS-BRCM1050. This module must be installed by the OEM or OEM integrator only. Instructions on installation of this module may not be provided to the end user. The highest reported Body SAR is 0.051 W/kg. |
Mail To: |
EA502588 |
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 12/21/2009 |
Ericsson AB |
Mobile Broadband Modules |
Lindholmspiren 11 |
Gothenburg, SE 417 56 Sweden |
Attention: Bernie Fuller , Certification Approval Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | VV7-MBMF33072-A |
Name of Grantee: | Ericsson AB |
Equipment Class: | PCS Licensed Transmitter |
Notes: | F3307 Ericsson Mobile Broadband Module - 850/900/1800/1900 GSM/GPRS/EDGE Mini-PCIe Wireless WAN card |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
22H | 824.2 - 848.8 | 2.24 | 0.0287 PM | 300KGXW | |
22H | 824.2 - 848.8 | 2.24 | 0.0311 PM | 300KG7W | |
24E | 1850.2 - 1909.8 | 1.03 | 0.041 PM | 300KGXW | |
24E | 1850.2 - 1909.8 | 1.02 | 0.0218 PM | 300KG7W |
Single Modular Approval. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.02 dBi in the 850 MHz Cellular band and 9.85 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. This device is approved for use in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.90 dBi in the 850 MHz Cellular band and 4.98 dBi in the PCS 1900 MHz band. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
Ericsson AB Mobile Broadband Modules Lindholmspiren 11 Gothenburg, SE 417 56 Sweden |
Date of Grant: 12/21/2009 |
Attention: Bernie Fuller , Certification Approval Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | VV7-MBMF33072-A |
Name of Grantee: | Ericsson AB |
Equipment Class: | PCS Licensed Transmitter |
Notes: | F3307 Ericsson Mobile Broadband Module - 850/900/1800/1900 GSM/GPRS/EDGE Mini-PCIe Wireless WAN card |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
22H | 824.2 - 848.8 | 2.24 | 0.0287 PM | 300KGXW | |
22H | 824.2 - 848.8 | 2.24 | 0.0311 PM | 300KG7W | |
24E | 1850.2 - 1909.8 | 1.03 | 0.041 PM | 300KGXW | |
24E | 1850.2 - 1909.8 | 1.02 | 0.0218 PM | 300KG7W |
Single Modular Approval. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.02 dBi in the 850 MHz Cellular band and 9.85 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. This device is approved for use in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.90 dBi in the 850 MHz Cellular band and 4.98 dBi in the PCS 1900 MHz band. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. |
Mail To: |
EA840622 |