FCC ID VV7-MBMF3507G-D

VV7MBMF3507G-D, VV7 MBMF3507GD, VV7-MBMF3507G-D, VV7-MBMF35O7G-D, VV7-MBMF3S07G-D

Ericsson AB 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card MBMF3507G-D

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: VV7-MBMF3507G-D is VV7. The remaining characters of the FCC ID, -MBMF3507G-D, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card

App # Purpose Date Unique ID
1 Change in Identification 2008-06-04 RA0RFE0kZ3gPNhJezVjUNg==
2 Class II Permissive Change 2008-06-26 JgXWtigFdkZFJNc4FogG5w==
3 Class II Permissive Change 2008-08-27 AN4tJbx75j8Kvm7gY9zjJw==
4 Class II Permissive Change 2008-08-30 J5AVYNgRmphXf5WXURhu5w==
5 Class II Permissive Change 2008-09-08 jk4/VkcLUz9v2LdpOdrN/Q==
6 Class II Permissive Change 2008-09-08 nsgqclrWfg1DAwo0ezCaDQ==
7 Class II Permissive Change 2008-11-04 ZovAZpn+TtvXLTgoezkEug==
8 Class II Permissive Change 2008-11-26 +9D/gYPbuJwyhZWUquNeuw==
9 Class II Permissive Change 2009-02-02 xGX+cOy3JX/8DffILKnxUw==
10 Class II Permissive Change 2009-02-17 g9sHpJRR+sKVXzqBHVBe9Q==
11 Class II Permissive Change 2009-03-05 WNMCKIYS8eEtHLKWBP1tsA==
12 Class II Permissive Change 2009-03-27 lbcBHTROase/obIkpxWhAA==
13 Class II Permissive Change 2009-07-01 FJ1AScth22Tq4vGXgYGlbQ==

Operating Frequencies

Device operates within approved frequencies overlapping with the following cellular bands: GSM 1900 PCS UP | LTE 2,1900 PCS UP | LTE 25,1900+ UP | LTE 35,TD PCS Lower DOWN | UMTS CH 2 UP | UMTS CH 25 UP | UMTS CH 35 DOWN |
Frequency RangePower OutputToleranceEmission DesignatorRule Parts App #
824.2-848.8 MHz2 Watts0.0729ppm300KGXW22H 8.4
824.2-848.8 MHz1.259 Watts0.0729ppm300KG7W22H 8.5
824.2-848.8 MHz2 Watts0.0729ppm300KGXW22H 3.4
824.2-848.8 MHz1.259 Watts0.0729ppm300KG7W22H 3.5
824.2-848.8 MHz2 Watts0.0729ppm300KGXW22H 13.4
824.2-848.8 MHz1.259 Watts0.0729ppm300KG7W22H 13.5
824.2-848.8 MHz2 Watts0.0729ppm300KGXW22H 10.4
824.2-848.8 MHz1.259 Watts0.0729ppm300KG7W22H 10.5
824.2-848.8 MHz2 Watts0.0729ppm300KGXW22H 4.4
824.2-848.8 MHz1.259 Watts0.0729ppm300KG7W22H 4.5
824.2-848.8 MHz2 Watts0.0729ppm300KGW22H 2.4
824.2-848.8 MHz1.259 Watts0.0729ppm300KGW22H 2.5
824.2-848.8 MHz2 Watts0.0729ppm300KGXW22H 5.4
824.2-848.8 MHz1.259 Watts0.0729ppm300KG7W22H 5.5
824.2-848.8 MHz2 Watts0.0729ppm300KGXW22H 12.4
824.2-848.8 MHz1.259 Watts0.0729ppm300KG7W22H 12.5
824.2-848.8 MHz2 Watts0.0729ppm300KGXW22H 6.4
824.2-848.8 MHz1.259 Watts0.0729ppm300KG7W22H 6.5
824.2-848.8 MHz2 Watts0.0729ppm300KGXW22H 1.4
824.2-848.8 MHz259 mW0.0729ppm300KG7W22H 1.5
824.2-848.8 MHz2 Watts0.0729ppm300KGXW22H 11.4
824.2-848.8 MHz1.259 Watts0.0729ppm300KG7W22H 11.5
824.2-848.8 MHz2 Watts0.0729ppm300KGXW22H 9.4
824.2-848.8 MHz1.259 Watts0.0729ppm300KG7W22H 9.5
824.2-848.8 MHz2 Watts0.0729ppm300KGXW22H 7.4
824.2-848.8 MHz1.259 Watts0.0729ppm300KG7W22H 7.5
826.4-846.6 MHz435 mW0.0394ppm4M20F9W22H 8.6
826.4-846.6 MHz435 mW0.0394ppm4M20F9W22H 3.6
826.4-846.6 MHz435 mW0.0394ppm4M20F9W22H 13.6
826.4-846.6 MHz435 mW0.0394ppm4M20F9W22H 10.6
826.4-846.6 MHz435 mW0.0394ppm4M20F9W22H 4.6
826.4-846.6 MHz435 mW0.0394ppm4M20F9W22H 2.6
826.4-846.6 MHz435 mW0.0394ppm4M20F9W22H 5.6
826.4-846.6 MHz435 mW0.0394ppm4M20F9W22H 12.6
826.4-846.6 MHz435 mW0.0394ppm4M20F9W22H 6.6
826.4-846.6 MHz435 mW0.0394ppm4M20F9W22H 1.6
826.4-846.6 MHz435 mW0.0394ppm4M20F9W22H 11.6
826.4-846.6 MHz435 mW0.0394ppm4M20F9W22H 9.6
826.4-846.6 MHz435 mW0.0394ppm4M20F9W22H 7.6
1.8502-1.9098 GHz871 mW0.0628ppm300KGXW24E 8.1
1.8502-1.9098 GHz742 mW0.0628ppm300KG7W24E 8.2
1.8502-1.9098 GHz871 mW0.0628ppm300KGXW24E 3.1
1.8502-1.9098 GHz742 mW0.0628ppm300KG7W24E 3.2
1.8502-1.9098 GHz871 mW0.0628ppm300KGXW24E 13.1
1.8502-1.9098 GHz742 mW0.0628ppm300KG7W24E 13.2
1.8502-1.9098 GHz871 mW0.0628ppm300KGXW24E 10.1
1.8502-1.9098 GHz742 mW0.0628ppm300KG7W24E 10.2
1.8502-1.9098 GHz871 mW0.0628ppm300KGXW24E 4.1
1.8502-1.9098 GHz742 mW0.0628ppm300KG7W24E 4.2
1.8502-1.9098 GHz871 mW0.0628ppm300KGXW24E 2.1
1.8502-1.9098 GHz742 mW0.0628ppm300KG7W24E 2.2
1.8502-1.9098 GHz871 mW0.0628ppm300KGXW24E 5.1
1.8502-1.9098 GHz742 mW0.0628ppm300KG7W24E 5.2
1.8502-1.9098 GHz871 mW0.0628ppm300KGXW24E 12.1
1.8502-1.9098 GHz742 mW0.0628ppm300KG7W24E 12.2
1.8502-1.9098 GHz871 mW0.0628ppm300KGXW24E 6.1
1.8502-1.9098 GHz742 mW0.0628ppm300KG7W24E 6.2
1.8502-1.9098 GHz871 mW0.0628ppm300KGXW24E 1.1
1.8502-1.9098 GHz742 mW0.0628ppm300KG7W24E 1.2
1.8502-1.9098 GHz871 mW0.0628ppm300KGXW24E 11.1
1.8502-1.9098 GHz742 mW0.0628ppm300KG7W24E 11.2
1.8502-1.9098 GHz871 mW0.0628ppm300KGXW24E 9.1
1.8502-1.9098 GHz742 mW0.0628ppm300KG7W24E 9.2
1.8502-1.9098 GHz871 mW0.0628ppm300KGXW24E 7.1
1.8502-1.9098 GHz742 mW0.0628ppm300KG7W24E 7.2
1.8524-1.9076 GHz387 mW0.0415ppm4M20F9W24E 8.3
1.8524-1.9075 GHz387 mW0.0415ppm4M20F9W24E 3.3
1.8524-1.9076 GHz387 mW0.0415ppm4M20F9W24E 13.3
1.8524-1.9076 GHz387 mW0.0415ppm4M20F9W24E 10.3
1.8524-1.9075 GHz387 mW0.0415ppm4M20F9W24E 4.3
1.8524-1.9076 GHz387 mW0.0415ppm4M20F9W24E 2.3
1.8524-1.9076 GHz387 mW0.0415ppm4M20F9W24E 5.3
1.8524-1.9076 GHz387 mW0.0415ppm4M20F9W24E 12.3
1.8524-1.9076 GHz387 mW0.0415ppm4M20F9W24E 6.3
1.8524-1.9076 GHz387 mW0.0415ppm4M20F9W24E 1.3
1.8524-1.9076 GHz387 mW0.0415ppm4M20F9W24E 11.3
1.8524-1.9076 GHz387 mW0.0415ppm4M20F9W24E 9.3
1.8524-1.9076 GHz387 mW0.0415ppm4M20F9W24E 7.3

Exhibits

Available Exhibits

App #Document Type Submitted
Available
13 Cover LetterCover Letter(s)
Adobe Acrobat PDF (21 kB)
2009-07-08
2009-07-01
13 MPE ReportRF Exposure Info
Adobe Acrobat PDF (711 kB)
2009-07-01
2009-07-01
13 Overall Assessment LetterCover Letter(s)
Adobe Acrobat PDF (318 kB)
2009-07-01
2009-07-01
13 Confidentiality LetterCover Letter(s)
Adobe Acrobat PDF (118 kB)
2009-07-01
2009-07-01
13 Agent LetterCover Letter(s)
Adobe Acrobat PDF (24 kB)
2009-07-01
2009-07-01
13 Cover letterCover Letter(s)
Adobe Acrobat PDF (63 kB)
2009-07-01
2009-07-01
13 Attestation StatementAttestation Statements
Adobe Acrobat PDF (63 kB)
2009-07-01
2009-07-01
12 Overall Assessment LetterCover Letter(s)
Adobe Acrobat PDF (349 kB)
2009-03-27
2009-03-27
12 Confidentiality LetterCover Letter(s)
Adobe Acrobat PDF (90 kB)
2009-03-27
2009-03-27
12 Agent LetterCover Letter(s)
Adobe Acrobat PDF (26 kB)
2009-03-27
2009-03-27
12 Cover letterCover Letter(s)
Adobe Acrobat PDF (63 kB)
2009-03-27
2009-03-27
12 Dell Latitude E6400 XFRRF Exposure Info
Adobe Acrobat PDF (439 kB)
2009-03-27
2009-03-27
12 Attestation StatementAttestation Statements
Adobe Acrobat PDF (63 kB)
2009-03-27
2009-03-27
11 Cover LetterCover Letter(s)
Adobe Acrobat PDF (62 kB)
2009-03-05
2009-03-05
11 Overall Assessment LetterCover Letter(s)
Adobe Acrobat PDF (840 kB)
2009-03-05
2009-03-05
11 Ericsson MPR LetterCover Letter(s)
Adobe Acrobat PDF (32 kB)
2009-03-05
2009-03-05
11 Regulatory Notice LetterCover Letter(s)
Adobe Acrobat PDF (29 kB)
2009-03-05
2009-03-05
11 Confidentiality LetterCover Letter(s)
Adobe Acrobat PDF (227 kB)
2009-03-05
2009-03-05
11 Agent LetterCover Letter(s)
Adobe Acrobat PDF (26 kB)
2009-03-05
2009-03-05
11 SAR Report Part 5RF Exposure Info
Adobe Acrobat PDF (801 kB)
2009-03-05
2009-03-05
11 SAR Report Part 4RF Exposure Info
Adobe Acrobat PDF (2662 kB)
2009-03-05
2009-03-05
11 SAR Report Part 3RF Exposure Info
Adobe Acrobat PDF (2562 kB)
2009-03-05
2009-03-05
11 SAR Report Part 2RF Exposure Info
Adobe Acrobat PDF (1188 kB)
2009-03-05
2009-03-05
11 SAR Report Part 1RF Exposure Info
Adobe Acrobat PDF (351 kB)
2009-03-05
2009-03-05
11 Attestation StatementAttestation Statements
Adobe Acrobat PDF (62 kB)
2009-03-05
2009-03-05
11 LabelID Label/Location Info
Adobe Acrobat PDF (1322 kB)
2009-03-05
2009-03-05
10 Overall Assessment LetterCover Letter(s)
Adobe Acrobat PDF (522 kB)
2009-02-17
2009-02-17
10 Agent LetterCover Letter(s)
Adobe Acrobat PDF (26 kB)
2009-02-17
2009-02-17
10 Cover Letter requesting C2PC and describing changesCover Letter(s)
Adobe Acrobat PDF (34 kB)
2009-02-17
2009-02-17
10 DELL VOSTRO 1520 MPE ReportRF Exposure Info
Adobe Acrobat PDF (684 kB)
2009-02-17
2009-02-17
10 DELL STUDIO 1440 MPE ReportRF Exposure Info
Adobe Acrobat PDF (664 kB)
2009-02-17
2009-02-17
10 DELL LATITUDE Z600 MPE ReportRF Exposure Info
Adobe Acrobat PDF (660 kB)
2009-02-17
2009-02-17
10 Attestation StatementAttestation Statements
Adobe Acrobat PDF (34 kB)
2009-02-17
2009-02-17
9 RFI FCC KDB 450824 SAR Probe Calibration InformationRF Exposure Info
Adobe Acrobat PDF (94 kB)
2009-02-02
2009-02-02
9 SAR Report Part 5 SupersedeRF Exposure Info
Adobe Acrobat PDF (1028 kB)
2009-01-30
2009-02-02
9 SAR Report Part 4 SupersedeRF Exposure Info
Adobe Acrobat PDF (1250 kB)
2009-01-30
2009-02-02
9 SAR Report Part 3 SupersedeRF Exposure Info
Adobe Acrobat PDF (1861 kB)
2009-01-30
2009-02-02
9 SAR Report Part 2 SupersedeRF Exposure Info
Adobe Acrobat PDF (2895 kB)
2009-01-30
2009-02-02
9 SAR Report Part 1 SupersedeRF Exposure Info
Adobe Acrobat PDF (210 kB)
2009-01-30
2009-02-02
9 Cover letter SupersedeCover Letter(s)
Adobe Acrobat PDF (58 kB)
2009-01-30
2009-02-02
9 Ericsson MPR LetterCover Letter(s)
Adobe Acrobat PDF (32 kB)
2009-01-30
2009-02-02
9 RFI Cover LetterCover Letter(s)
Adobe Acrobat PDF (102 kB)
2009-01-30
2009-02-02
9 Attestation Statement SupersedeAttestation Statements
Adobe Acrobat PDF (58 kB)
2009-01-30
2009-02-02
9 Overall Assessment LetterCover Letter(s)
Adobe Acrobat PDF (736 kB)
2009-01-09
2009-02-02
9 Confidentiality LetterCover Letter(s)
Adobe Acrobat PDF (21 kB)
2009-01-09
2009-02-02
9 Agent LetterCover Letter(s)
Adobe Acrobat PDF (26 kB)
2009-01-09
2009-02-02
9 LabelID Label/Location Info
Adobe Acrobat PDF (152 kB)
2009-01-09
2009-02-02
8 Overall Assessment LetterCover Letter(s)
Adobe Acrobat PDF (381 kB)
2008-11-26
2008-11-26
8 Agent LetterCover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-11-26
2008-11-26
8 Cover Letter requesting C2PC and describing changesCover Letter(s)
Adobe Acrobat PDF (27 kB)
2008-11-26
2008-11-26
8 Dell Adamo 13 MPE ReportRF Exposure Info
Adobe Acrobat PDF (1685 kB)
2008-11-26
2008-11-26
8 Dell Studio 1555 MPE ReportRF Exposure Info
Adobe Acrobat PDF (965 kB)
2008-11-26
2008-11-26
8 Attestation StatementAttestation Statements
Adobe Acrobat PDF (27 kB)
2008-11-26
2008-11-26
7 Condfidentiality requestCover Letter(s)
Adobe Acrobat PDF (240 kB)
2008-10-23
2008-11-04
7 Ericsson Responsibility letterCover Letter(s)
Adobe Acrobat PDF (20 kB)
2008-10-23
2008-11-04
7 Issue 2 LAtitude SAr reportRF Exposure Info
Adobe Acrobat PDF (5347 kB)
2008-10-23
2008-11-04
7 Inspiron 910 SAR ApproachRF Exposure Info
Adobe Acrobat PDF (187 kB)
2008-10-23
2008-11-04
7 INSPIRON moduleslistCover Letter(s)
Adobe Acrobat PDF (7 kB)
2008-10-08
2008-11-04
7 QiaoHong Label VV7 MBMF3507G DID Label/Location Info
Adobe Acrobat PDF (824 kB)
2008-10-08
2008-11-04
7 QDS BRCM1028ID Label/Location Info
Adobe Acrobat PDF (824 kB)
2008-10-08
2008-11-04
7 PPD AR5BXB63 DID Label/Location Info
Adobe Acrobat PDF (782 kB)
2008-10-08
2008-11-04
7 MCLBCM92046ID Label/Location Info
Adobe Acrobat PDF (765 kB)
2008-10-08
2008-11-04
7 QiaoHong SetupGuide EnglishUsers Manual
Adobe Acrobat PDF (755 kB)
2008-10-08
2008-11-04
7 Mini Cooper SQRGUsers Manual
Adobe Acrobat PDF (687 kB)
2008-10-08
2008-11-04
7 Latitude E4200modulesCover Letter(s)
Adobe Acrobat PDF (7 kB)
2008-10-08
2008-11-04
7 QDS BRCM1035ID Label/Location Info
Adobe Acrobat PDF (450 kB)
2008-10-08
2008-11-04
7 QDS BRCM1033ID Label/Location Info
Adobe Acrobat PDF (318 kB)
2008-10-08
2008-11-04
7 QDS BRCM1031ID Label/Location Info
Adobe Acrobat PDF (456 kB)
2008-10-08
2008-11-04
7 QDS BRCM1030ID Label/Location Info
Adobe Acrobat PDF (447 kB)
2008-10-08
2008-11-04
7 MiniCooper Label VV7 MBMF3507G DID Label/Location Info
Adobe Acrobat PDF (241 kB)
2008-10-08
2008-11-04
7 E2K533ANHID Label/Location Info
Adobe Acrobat PDF (427 kB)
2008-10-08
2008-11-04
7 E2K512ANHMWID Label/Location Info
Adobe Acrobat PDF (432 kB)
2008-10-08
2008-11-04
7 Output Power of Colocated modules of Latitude E4200Test Report
Adobe Acrobat PDF (5 kB)
2008-09-11
2008-11-04
7 Output Power of Colocated modules of Inspiron 910Test Report
Adobe Acrobat PDF (4 kB)
2008-09-11
2008-11-04
7 Latitude E4200 SAr ReportRF Exposure Info
Adobe Acrobat PDF (3509 kB)
2008-09-11
2008-11-04
7 INspiron SAR Part 1RF Exposure Info
Adobe Acrobat PDF (3393 kB)
2008-09-11
2008-11-04
7 INspiron SAR Part 4RF Exposure Info
Adobe Acrobat PDF (1537 kB)
2008-09-11
2008-11-04
7 INspiron SAR Part 3RF Exposure Info
Adobe Acrobat PDF (2329 kB)
2008-09-11
2008-11-04
7 INspiron SAR Part 2RF Exposure Info
Adobe Acrobat PDF (3319 kB)
2008-09-11
2008-11-04
7 Overall AssessmentCover Letter(s)
Adobe Acrobat PDF (1171 kB)
2008-09-11
2008-11-04
7 Agent Letter BABTCover Letter(s)
Adobe Acrobat PDF (15 kB)
2008-09-11
2008-11-04
7 Agent Letter AT4 WirelessCover Letter(s)
Adobe Acrobat PDF (15 kB)
2008-09-11
2008-11-04
7 Request for C2PC and Description of ChangeCover Letter(s)
Adobe Acrobat PDF (18 kB)
2008-09-11
2008-11-04
7 Attestation statementAttestation Statements
Adobe Acrobat PDF (18 kB)
2008-09-11
2008-11-04
6 Overall Assessment LetterCover Letter(s)
Adobe Acrobat PDF (549 kB)
2008-09-08
2008-09-08
6 Agents LetterCover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-09-08
2008-09-08
6 C2PC request and change descriptionCover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-09-08
2008-09-08
6 INSPIRON 1210 MPE ReportRF Exposure Info
Adobe Acrobat PDF (371 kB)
2008-09-08
2008-09-08
6 P01S MPE ReportRF Exposure Info
Adobe Acrobat PDF (268 kB)
2008-09-08
2008-09-08
6 XPS M1350 MPE ReportRF Exposure Info
Adobe Acrobat PDF (703 kB)
2008-09-08
2008-09-08
6 XPS M1330 MPE ReportRF Exposure Info
Adobe Acrobat PDF (505 kB)
2008-09-08
2008-09-08
6 Latitude D630 MPE ReportRF Exposure Info
Adobe Acrobat PDF (385 kB)
2008-09-08
2008-09-08
6 Attestation LetterAttestation Statements
Adobe Acrobat PDF (26 kB)
2008-09-08
2008-09-08
5 Overall Assessment LetterCover Letter(s)
Adobe Acrobat PDF (549 kB)
2008-09-08
5 Agents LetterCover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-09-08
5 C2PC Request and Change DescriptionCover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-09-08
4 Precision M4400 MPERF Exposure Info
Adobe Acrobat PDF (1740 kB)
2008-08-30
2008-08-30
4 Latitude E6500 MPERF Exposure Info
Adobe Acrobat PDF (1740 kB)
2008-08-30
2008-08-30
4 Precision M2400 MPERF Exposure Info
Adobe Acrobat PDF (1740 kB)
2008-08-30
2008-08-30
4 Latitude E5400 MPERF Exposure Info
Adobe Acrobat PDF (1740 kB)
2008-08-30
2008-08-30
4 Latitude ATG E6400 MPERF Exposure Info
Adobe Acrobat PDF (1740 kB)
2008-08-30
2008-08-30
4 Latitude E6400 MPERF Exposure Info
Adobe Acrobat PDF (1740 kB)
2008-08-30
2008-08-30
4 Studio 1737 MPERF Exposure Info
Adobe Acrobat PDF (1740 kB)
2008-08-30
2008-08-30
4 Overall Assessment letterCover Letter(s)
Adobe Acrobat PDF (280 kB)
2008-08-30
2008-08-30
4 Agents letterCover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-08-30
2008-08-30
4 C2PC request and Change descriptionCover Letter(s)
Adobe Acrobat PDF (42 kB)
2008-08-30
2008-08-30
4 AttestationAttestation Statements
Adobe Acrobat PDF (42 kB)
2008-08-30
2008-08-30
3 Overall Assessment LetterCover Letter(s)
Adobe Acrobat PDF (344 kB)
2008-08-27
2008-08-27
3 Agent LetterCover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-08-27
2008-08-27
3 C2PC Request and Change DescriptionCover Letter(s)
Adobe Acrobat PDF (48 kB)
2008-08-27
2008-08-27
3 Studio XPS 1640 MPE ReportRF Exposure Info
Adobe Acrobat PDF (356 kB)
2008-08-27
2008-08-27
3 Latitude E4300 MPE ReportRF Exposure Info
Adobe Acrobat PDF (359 kB)
2008-08-27
2008-08-27
3 Studio 1435 MPE ReportRF Exposure Info
Adobe Acrobat PDF (363 kB)
2008-08-27
2008-08-27
3 Precision M6400 MPE ReportRF Exposure Info
Adobe Acrobat PDF (351 kB)
2008-08-27
2008-08-27
3 Studio XPS 1340 MPE ReportRF Exposure Info
Adobe Acrobat PDF (521 kB)
2008-08-27
2008-08-27
3 Studio 1735 MPE ReportRF Exposure Info
Adobe Acrobat PDF (1810 kB)
2008-08-27
2008-08-27
3 Studio 1537 MPE reportRF Exposure Info
Adobe Acrobat PDF (1810 kB)
2008-08-27
2008-08-27
3 Studio 1535 MPE ReportRF Exposure Info
Adobe Acrobat PDF (1810 kB)
2008-08-27
2008-08-27
3 AttestationAttestation Statements
Adobe Acrobat PDF (48 kB)
2008-08-27
2008-08-27
2 M4400 ReportRF Exposure Info
Adobe Acrobat PDF (1407 kB)
2008-06-26
2008-06-26
2 M4300 ReportRF Exposure Info
Adobe Acrobat PDF (1408 kB)
2008-06-26
2008-06-26
2 D830 ReportRF Exposure Info
Adobe Acrobat PDF (1408 kB)
2008-06-26
2008-06-26
2 D430 ReportRF Exposure Info
Adobe Acrobat PDF (1408 kB)
2008-06-26
2008-06-26
2 ATG D630 ReportRF Exposure Info
Adobe Acrobat PDF (1408 kB)
2008-06-26
2008-06-26
2 D630 ReportRF Exposure Info
Adobe Acrobat PDF (1408 kB)
2008-06-26
2008-06-26
2 E6500 ReportRF Exposure Info
Adobe Acrobat PDF (1407 kB)
2008-06-26
2008-06-26
2 M2400 ReportRF Exposure Info
Adobe Acrobat PDF (1408 kB)
2008-06-26
2008-06-26
2 E5400 ReportRF Exposure Info
Adobe Acrobat PDF (1407 kB)
2008-06-26
2008-06-26
2 ATG E6400 ReportRF Exposure Info
Adobe Acrobat PDF (1407 kB)
2008-06-26
2008-06-26
2 E6400 ReportRF Exposure Info
Adobe Acrobat PDF (1407 kB)
2008-06-26
2008-06-26
2 Studio 1737 ReportRF Exposure Info
Adobe Acrobat PDF (1408 kB)
2008-06-26
2008-06-26
2 Studio 1735 ReportRF Exposure Info
Adobe Acrobat PDF (1407 kB)
2008-06-26
2008-06-26
2 Studio 1537 ReportRF Exposure Info
Adobe Acrobat PDF (1407 kB)
2008-06-26
2008-06-26
2 Studio 1536 ReportRF Exposure Info
Adobe Acrobat PDF (1407 kB)
2008-06-26
2008-06-26
2 Studio 1535 ReportRF Exposure Info
Adobe Acrobat PDF (1407 kB)
2008-06-26
2008-06-26
2 Assessment letterCover Letter(s)
Adobe Acrobat PDF (358 kB)
2008-06-26
2008-06-26
2 Agent LetterCover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-06-26
2008-06-26
2 C2PC request and dEscription of ChangeCover Letter(s)
Adobe Acrobat PDF (40 kB)
2008-06-26
2008-06-26
2 Attestation statementAttestation Statements
Adobe Acrobat PDF (40 kB)
2008-06-26
2008-06-26
1 Overall Assessment LetterCover Letter(s)
Adobe Acrobat PDF (224 kB)
2008-06-04
2008-06-04
1 Short term ConfidentialityCover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-06-04
2008-06-04
1 Agent LetterCover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-06-04
2008-06-04
1 Cover LetterCover Letter(s)
Adobe Acrobat PDF (25 kB)
2008-06-04
2008-06-04
1 External PhotosExternal Photos
Adobe Acrobat PDF (75 kB)
2008-06-04
2008-11-30
1 LabelID Label/Location Info
Adobe Acrobat PDF (108 kB)
2008-06-04
2008-06-04

APP # 13 (2009-07-01)

App # Document Type Submitted
Available
13 Cover Letter Cover Letter(s)
Adobe Acrobat PDF (21 kB)
2009-07-08 00:00:00
2009-07-01 00:00:00
13 MPE Report RF Exposure Info
Adobe Acrobat PDF (711 kB)
2009-07-01 00:00:00
2009-07-01 00:00:00
13 Overall Assessment Letter Cover Letter(s)
Adobe Acrobat PDF (318 kB)
2009-07-01 00:00:00
2009-07-01 00:00:00
13 Confidentiality Letter Cover Letter(s)
Adobe Acrobat PDF (118 kB)
2009-07-01 00:00:00
2009-07-01 00:00:00
13 Agent Letter Cover Letter(s)
Adobe Acrobat PDF (24 kB)
2009-07-01 00:00:00
2009-07-01 00:00:00
13 Cover letter Cover Letter(s)
Adobe Acrobat PDF (63 kB)
2009-07-01 00:00:00
2009-07-01 00:00:00
13 Attestation Statement Attestation Statements
Adobe Acrobat PDF (63 kB)
2009-07-01 00:00:00
2009-07-01 00:00:00

APP # 12 (2009-03-27)

App # Document Type Submitted
Available
12 Overall Assessment Letter Cover Letter(s)
Adobe Acrobat PDF (349 kB)
2009-03-27 00:00:00
2009-03-27 00:00:00
12 Confidentiality Letter Cover Letter(s)
Adobe Acrobat PDF (90 kB)
2009-03-27 00:00:00
2009-03-27 00:00:00
12 Agent Letter Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2009-03-27 00:00:00
2009-03-27 00:00:00
12 Cover letter Cover Letter(s)
Adobe Acrobat PDF (63 kB)
2009-03-27 00:00:00
2009-03-27 00:00:00
12 Dell Latitude E6400 XFR RF Exposure Info
Adobe Acrobat PDF (439 kB)
2009-03-27 00:00:00
2009-03-27 00:00:00
12 Attestation Statement Attestation Statements
Adobe Acrobat PDF (63 kB)
2009-03-27 00:00:00
2009-03-27 00:00:00

APP # 11 (2009-03-05)

App # Document Type Submitted
Available
11 Cover Letter Cover Letter(s)
Adobe Acrobat PDF (62 kB)
2009-03-05 00:00:00
2009-03-05 00:00:00
11 Overall Assessment Letter Cover Letter(s)
Adobe Acrobat PDF (840 kB)
2009-03-05 00:00:00
2009-03-05 00:00:00
11 Ericsson MPR Letter Cover Letter(s)
Adobe Acrobat PDF (32 kB)
2009-03-05 00:00:00
2009-03-05 00:00:00
11 Regulatory Notice Letter Cover Letter(s)
Adobe Acrobat PDF (29 kB)
2009-03-05 00:00:00
2009-03-05 00:00:00
11 Confidentiality Letter Cover Letter(s)
Adobe Acrobat PDF (227 kB)
2009-03-05 00:00:00
2009-03-05 00:00:00
11 Agent Letter Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2009-03-05 00:00:00
2009-03-05 00:00:00
11 SAR Report Part 5 RF Exposure Info
Adobe Acrobat PDF (801 kB)
2009-03-05 00:00:00
2009-03-05 00:00:00
11 SAR Report Part 4 RF Exposure Info
Adobe Acrobat PDF (2662 kB)
2009-03-05 00:00:00
2009-03-05 00:00:00
11 SAR Report Part 3 RF Exposure Info
Adobe Acrobat PDF (2562 kB)
2009-03-05 00:00:00
2009-03-05 00:00:00
11 SAR Report Part 2 RF Exposure Info
Adobe Acrobat PDF (1188 kB)
2009-03-05 00:00:00
2009-03-05 00:00:00
11 SAR Report Part 1 RF Exposure Info
Adobe Acrobat PDF (351 kB)
2009-03-05 00:00:00
2009-03-05 00:00:00
11 Attestation Statement Attestation Statements
Adobe Acrobat PDF (62 kB)
2009-03-05 00:00:00
2009-03-05 00:00:00
11 Label ID Label/Location Info
Adobe Acrobat PDF (1322 kB)
2009-03-05 00:00:00
2009-03-05 00:00:00

APP # 10 (2009-02-17)

App # Document Type Submitted
Available
10 Overall Assessment Letter Cover Letter(s)
Adobe Acrobat PDF (522 kB)
2009-02-17 00:00:00
2009-02-17 00:00:00
10 Agent Letter Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2009-02-17 00:00:00
2009-02-17 00:00:00
10 Cover Letter requesting C2PC and describing changes Cover Letter(s)
Adobe Acrobat PDF (34 kB)
2009-02-17 00:00:00
2009-02-17 00:00:00
10 DELL VOSTRO 1520 MPE Report RF Exposure Info
Adobe Acrobat PDF (684 kB)
2009-02-17 00:00:00
2009-02-17 00:00:00
10 DELL STUDIO 1440 MPE Report RF Exposure Info
Adobe Acrobat PDF (664 kB)
2009-02-17 00:00:00
2009-02-17 00:00:00
10 DELL LATITUDE Z600 MPE Report RF Exposure Info
Adobe Acrobat PDF (660 kB)
2009-02-17 00:00:00
2009-02-17 00:00:00
10 Attestation Statement Attestation Statements
Adobe Acrobat PDF (34 kB)
2009-02-17 00:00:00
2009-02-17 00:00:00

APP # 9 (2009-02-02)

App # Document Type Submitted
Available
9 RFI FCC KDB 450824 SAR Probe Calibration Information RF Exposure Info
Adobe Acrobat PDF (94 kB)
2009-02-02 00:00:00
2009-02-02 00:00:00
9 SAR Report Part 5 Supersede RF Exposure Info
Adobe Acrobat PDF (1028 kB)
2009-01-30 00:00:00
2009-02-02 00:00:00
9 SAR Report Part 4 Supersede RF Exposure Info
Adobe Acrobat PDF (1250 kB)
2009-01-30 00:00:00
2009-02-02 00:00:00
9 SAR Report Part 3 Supersede RF Exposure Info
Adobe Acrobat PDF (1861 kB)
2009-01-30 00:00:00
2009-02-02 00:00:00
9 SAR Report Part 2 Supersede RF Exposure Info
Adobe Acrobat PDF (2895 kB)
2009-01-30 00:00:00
2009-02-02 00:00:00
9 SAR Report Part 1 Supersede RF Exposure Info
Adobe Acrobat PDF (210 kB)
2009-01-30 00:00:00
2009-02-02 00:00:00
9 Cover letter Supersede Cover Letter(s)
Adobe Acrobat PDF (58 kB)
2009-01-30 00:00:00
2009-02-02 00:00:00
9 Ericsson MPR Letter Cover Letter(s)
Adobe Acrobat PDF (32 kB)
2009-01-30 00:00:00
2009-02-02 00:00:00
9 RFI Cover Letter Cover Letter(s)
Adobe Acrobat PDF (102 kB)
2009-01-30 00:00:00
2009-02-02 00:00:00
9 Attestation Statement Supersede Attestation Statements
Adobe Acrobat PDF (58 kB)
2009-01-30 00:00:00
2009-02-02 00:00:00
9 Overall Assessment Letter Cover Letter(s)
Adobe Acrobat PDF (736 kB)
2009-01-09 00:00:00
2009-02-02 00:00:00
9 Confidentiality Letter Cover Letter(s)
Adobe Acrobat PDF (21 kB)
2009-01-09 00:00:00
2009-02-02 00:00:00
9 Agent Letter Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2009-01-09 00:00:00
2009-02-02 00:00:00
9 Label ID Label/Location Info
Adobe Acrobat PDF (152 kB)
2009-01-09 00:00:00
2009-02-02 00:00:00

APP # 8 (2008-11-26)

App # Document Type Submitted
Available
8 Overall Assessment Letter Cover Letter(s)
Adobe Acrobat PDF (381 kB)
2008-11-26 00:00:00
2008-11-26 00:00:00
8 Agent Letter Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-11-26 00:00:00
2008-11-26 00:00:00
8 Cover Letter requesting C2PC and describing changes Cover Letter(s)
Adobe Acrobat PDF (27 kB)
2008-11-26 00:00:00
2008-11-26 00:00:00
8 Dell Adamo 13 MPE Report RF Exposure Info
Adobe Acrobat PDF (1685 kB)
2008-11-26 00:00:00
2008-11-26 00:00:00
8 Dell Studio 1555 MPE Report RF Exposure Info
Adobe Acrobat PDF (965 kB)
2008-11-26 00:00:00
2008-11-26 00:00:00
8 Attestation Statement Attestation Statements
Adobe Acrobat PDF (27 kB)
2008-11-26 00:00:00
2008-11-26 00:00:00

APP # 7 (2008-11-04)

App # Document Type Submitted
Available
7 Condfidentiality request Cover Letter(s)
Adobe Acrobat PDF (240 kB)
2008-10-23 00:00:00
2008-11-04 00:00:00
7 Ericsson Responsibility letter Cover Letter(s)
Adobe Acrobat PDF (20 kB)
2008-10-23 00:00:00
2008-11-04 00:00:00
7 Issue 2 LAtitude SAr report RF Exposure Info
Adobe Acrobat PDF (5347 kB)
2008-10-23 00:00:00
2008-11-04 00:00:00
7 Inspiron 910 SAR Approach RF Exposure Info
Adobe Acrobat PDF (187 kB)
2008-10-23 00:00:00
2008-11-04 00:00:00
7 INSPIRON moduleslist Cover Letter(s)
Adobe Acrobat PDF (7 kB)
2008-10-08 00:00:00
2008-11-04 00:00:00
7 QiaoHong Label VV7 MBMF3507G D ID Label/Location Info
Adobe Acrobat PDF (824 kB)
2008-10-08 00:00:00
2008-11-04 00:00:00
7 QDS BRCM1028 ID Label/Location Info
Adobe Acrobat PDF (824 kB)
2008-10-08 00:00:00
2008-11-04 00:00:00
7 PPD AR5BXB63 D ID Label/Location Info
Adobe Acrobat PDF (782 kB)
2008-10-08 00:00:00
2008-11-04 00:00:00
7 MCLBCM92046 ID Label/Location Info
Adobe Acrobat PDF (765 kB)
2008-10-08 00:00:00
2008-11-04 00:00:00
7 QiaoHong SetupGuide English Users Manual
Adobe Acrobat PDF (755 kB)
2008-10-08 00:00:00
2008-11-04 00:00:00
7 Mini Cooper SQRG Users Manual
Adobe Acrobat PDF (687 kB)
2008-10-08 00:00:00
2008-11-04 00:00:00
7 Latitude E4200modules Cover Letter(s)
Adobe Acrobat PDF (7 kB)
2008-10-08 00:00:00
2008-11-04 00:00:00
7 QDS BRCM1035 ID Label/Location Info
Adobe Acrobat PDF (450 kB)
2008-10-08 00:00:00
2008-11-04 00:00:00
7 QDS BRCM1033 ID Label/Location Info
Adobe Acrobat PDF (318 kB)
2008-10-08 00:00:00
2008-11-04 00:00:00
7 QDS BRCM1031 ID Label/Location Info
Adobe Acrobat PDF (456 kB)
2008-10-08 00:00:00
2008-11-04 00:00:00
7 QDS BRCM1030 ID Label/Location Info
Adobe Acrobat PDF (447 kB)
2008-10-08 00:00:00
2008-11-04 00:00:00
7 MiniCooper Label VV7 MBMF3507G D ID Label/Location Info
Adobe Acrobat PDF (241 kB)
2008-10-08 00:00:00
2008-11-04 00:00:00
7 E2K533ANH ID Label/Location Info
Adobe Acrobat PDF (427 kB)
2008-10-08 00:00:00
2008-11-04 00:00:00
7 E2K512ANHMW ID Label/Location Info
Adobe Acrobat PDF (432 kB)
2008-10-08 00:00:00
2008-11-04 00:00:00
7 Output Power of Colocated modules of Latitude E4200 Test Report
Adobe Acrobat PDF (5 kB)
2008-09-11 00:00:00
2008-11-04 00:00:00
7 Output Power of Colocated modules of Inspiron 910 Test Report
Adobe Acrobat PDF (4 kB)
2008-09-11 00:00:00
2008-11-04 00:00:00
7 Latitude E4200 SAr Report RF Exposure Info
Adobe Acrobat PDF (3509 kB)
2008-09-11 00:00:00
2008-11-04 00:00:00
7 INspiron SAR Part 1 RF Exposure Info
Adobe Acrobat PDF (3393 kB)
2008-09-11 00:00:00
2008-11-04 00:00:00
7 INspiron SAR Part 4 RF Exposure Info
Adobe Acrobat PDF (1537 kB)
2008-09-11 00:00:00
2008-11-04 00:00:00
7 INspiron SAR Part 3 RF Exposure Info
Adobe Acrobat PDF (2329 kB)
2008-09-11 00:00:00
2008-11-04 00:00:00
7 INspiron SAR Part 2 RF Exposure Info
Adobe Acrobat PDF (3319 kB)
2008-09-11 00:00:00
2008-11-04 00:00:00
7 Overall Assessment Cover Letter(s)
Adobe Acrobat PDF (1171 kB)
2008-09-11 00:00:00
2008-11-04 00:00:00
7 Agent Letter BABT Cover Letter(s)
Adobe Acrobat PDF (15 kB)
2008-09-11 00:00:00
2008-11-04 00:00:00
7 Agent Letter AT4 Wireless Cover Letter(s)
Adobe Acrobat PDF (15 kB)
2008-09-11 00:00:00
2008-11-04 00:00:00
7 Request for C2PC and Description of Change Cover Letter(s)
Adobe Acrobat PDF (18 kB)
2008-09-11 00:00:00
2008-11-04 00:00:00
7 Attestation statement Attestation Statements
Adobe Acrobat PDF (18 kB)
2008-09-11 00:00:00
2008-11-04 00:00:00

APP # 6 (2008-09-08)

App # Document Type Submitted
Available
6 Overall Assessment Letter Cover Letter(s)
Adobe Acrobat PDF (549 kB)
2008-09-08 00:00:00
2008-09-08 00:00:00
6 Agents Letter Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-09-08 00:00:00
2008-09-08 00:00:00
6 C2PC request and change description Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-09-08 00:00:00
2008-09-08 00:00:00
6 INSPIRON 1210 MPE Report RF Exposure Info
Adobe Acrobat PDF (371 kB)
2008-09-08 00:00:00
2008-09-08 00:00:00
6 P01S MPE Report RF Exposure Info
Adobe Acrobat PDF (268 kB)
2008-09-08 00:00:00
2008-09-08 00:00:00
6 XPS M1350 MPE Report RF Exposure Info
Adobe Acrobat PDF (703 kB)
2008-09-08 00:00:00
2008-09-08 00:00:00
6 XPS M1330 MPE Report RF Exposure Info
Adobe Acrobat PDF (505 kB)
2008-09-08 00:00:00
2008-09-08 00:00:00
6 Latitude D630 MPE Report RF Exposure Info
Adobe Acrobat PDF (385 kB)
2008-09-08 00:00:00
2008-09-08 00:00:00
6 Attestation Letter Attestation Statements
Adobe Acrobat PDF (26 kB)
2008-09-08 00:00:00
2008-09-08 00:00:00

APP # 5 (2008-09-08)

App # Document Type Submitted
Available
5 Overall Assessment Letter Cover Letter(s)
Adobe Acrobat PDF (549 kB)
2008-09-08 00:00:00
N/A
5 Agents Letter Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-09-08 00:00:00
N/A
5 C2PC Request and Change Description Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-09-08 00:00:00
N/A

APP # 4 (2008-08-30)

App # Document Type Submitted
Available
4 Precision M4400 MPE RF Exposure Info
Adobe Acrobat PDF (1740 kB)
2008-08-30 00:00:00
2008-08-30 00:00:00
4 Latitude E6500 MPE RF Exposure Info
Adobe Acrobat PDF (1740 kB)
2008-08-30 00:00:00
2008-08-30 00:00:00
4 Precision M2400 MPE RF Exposure Info
Adobe Acrobat PDF (1740 kB)
2008-08-30 00:00:00
2008-08-30 00:00:00
4 Latitude E5400 MPE RF Exposure Info
Adobe Acrobat PDF (1740 kB)
2008-08-30 00:00:00
2008-08-30 00:00:00
4 Latitude ATG E6400 MPE RF Exposure Info
Adobe Acrobat PDF (1740 kB)
2008-08-30 00:00:00
2008-08-30 00:00:00
4 Latitude E6400 MPE RF Exposure Info
Adobe Acrobat PDF (1740 kB)
2008-08-30 00:00:00
2008-08-30 00:00:00
4 Studio 1737 MPE RF Exposure Info
Adobe Acrobat PDF (1740 kB)
2008-08-30 00:00:00
2008-08-30 00:00:00
4 Overall Assessment letter Cover Letter(s)
Adobe Acrobat PDF (280 kB)
2008-08-30 00:00:00
2008-08-30 00:00:00
4 Agents letter Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-08-30 00:00:00
2008-08-30 00:00:00
4 C2PC request and Change description Cover Letter(s)
Adobe Acrobat PDF (42 kB)
2008-08-30 00:00:00
2008-08-30 00:00:00
4 Attestation Attestation Statements
Adobe Acrobat PDF (42 kB)
2008-08-30 00:00:00
2008-08-30 00:00:00

APP # 3 (2008-08-27)

App # Document Type Submitted
Available
3 Overall Assessment Letter Cover Letter(s)
Adobe Acrobat PDF (344 kB)
2008-08-27 00:00:00
2008-08-27 00:00:00
3 Agent Letter Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-08-27 00:00:00
2008-08-27 00:00:00
3 C2PC Request and Change Description Cover Letter(s)
Adobe Acrobat PDF (48 kB)
2008-08-27 00:00:00
2008-08-27 00:00:00
3 Studio XPS 1640 MPE Report RF Exposure Info
Adobe Acrobat PDF (356 kB)
2008-08-27 00:00:00
2008-08-27 00:00:00
3 Latitude E4300 MPE Report RF Exposure Info
Adobe Acrobat PDF (359 kB)
2008-08-27 00:00:00
2008-08-27 00:00:00
3 Studio 1435 MPE Report RF Exposure Info
Adobe Acrobat PDF (363 kB)
2008-08-27 00:00:00
2008-08-27 00:00:00
3 Precision M6400 MPE Report RF Exposure Info
Adobe Acrobat PDF (351 kB)
2008-08-27 00:00:00
2008-08-27 00:00:00
3 Studio XPS 1340 MPE Report RF Exposure Info
Adobe Acrobat PDF (521 kB)
2008-08-27 00:00:00
2008-08-27 00:00:00
3 Studio 1735 MPE Report RF Exposure Info
Adobe Acrobat PDF (1810 kB)
2008-08-27 00:00:00
2008-08-27 00:00:00
3 Studio 1537 MPE report RF Exposure Info
Adobe Acrobat PDF (1810 kB)
2008-08-27 00:00:00
2008-08-27 00:00:00
3 Studio 1535 MPE Report RF Exposure Info
Adobe Acrobat PDF (1810 kB)
2008-08-27 00:00:00
2008-08-27 00:00:00
3 Attestation Attestation Statements
Adobe Acrobat PDF (48 kB)
2008-08-27 00:00:00
2008-08-27 00:00:00

APP # 2 (2008-06-26)

App # Document Type Submitted
Available
2 M4400 Report RF Exposure Info
Adobe Acrobat PDF (1407 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00
2 M4300 Report RF Exposure Info
Adobe Acrobat PDF (1408 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00
2 D830 Report RF Exposure Info
Adobe Acrobat PDF (1408 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00
2 D430 Report RF Exposure Info
Adobe Acrobat PDF (1408 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00
2 ATG D630 Report RF Exposure Info
Adobe Acrobat PDF (1408 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00
2 D630 Report RF Exposure Info
Adobe Acrobat PDF (1408 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00
2 E6500 Report RF Exposure Info
Adobe Acrobat PDF (1407 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00
2 M2400 Report RF Exposure Info
Adobe Acrobat PDF (1408 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00
2 E5400 Report RF Exposure Info
Adobe Acrobat PDF (1407 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00
2 ATG E6400 Report RF Exposure Info
Adobe Acrobat PDF (1407 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00
2 E6400 Report RF Exposure Info
Adobe Acrobat PDF (1407 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00
2 Studio 1737 Report RF Exposure Info
Adobe Acrobat PDF (1408 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00
2 Studio 1735 Report RF Exposure Info
Adobe Acrobat PDF (1407 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00
2 Studio 1537 Report RF Exposure Info
Adobe Acrobat PDF (1407 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00
2 Studio 1536 Report RF Exposure Info
Adobe Acrobat PDF (1407 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00
2 Studio 1535 Report RF Exposure Info
Adobe Acrobat PDF (1407 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00
2 Assessment letter Cover Letter(s)
Adobe Acrobat PDF (358 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00
2 Agent Letter Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00
2 C2PC request and dEscription of Change Cover Letter(s)
Adobe Acrobat PDF (40 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00
2 Attestation statement Attestation Statements
Adobe Acrobat PDF (40 kB)
2008-06-26 00:00:00
2008-06-26 00:00:00

APP # 1 (2008-06-04)

App # Document Type Submitted
Available
1 Overall Assessment Letter Cover Letter(s)
Adobe Acrobat PDF (224 kB)
2008-06-04 00:00:00
2008-06-04 00:00:00
1 Short term Confidentiality Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-06-04 00:00:00
2008-06-04 00:00:00
1 Agent Letter Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2008-06-04 00:00:00
2008-06-04 00:00:00
1 Cover Letter Cover Letter(s)
Adobe Acrobat PDF (25 kB)
2008-06-04 00:00:00
2008-06-04 00:00:00
1 External Photos External Photos
Adobe Acrobat PDF (75 kB)
2008-06-04 00:00:00
2008-11-30 00:00:00
1 Label ID Label/Location Info
Adobe Acrobat PDF (108 kB)
2008-06-04 00:00:00
2008-06-04 00:00:00

APP # 9 (2009-02-02)

App # Document Type Submitted
Available
9 Antenna Location Notebook Mode Operational Description
Adobe Acrobat PDF (278 kB)
2009-01-09 00:00:00
N/A

APP # 13 (2009-07-01)

App # Document Type Submitted
Available
13 WLAN Antenna 3 Operational Description
Adobe Acrobat PDF (509 kB)
2009-07-01 00:00:00
N/A
13 WWAN Antenna 8 Operational Description
Adobe Acrobat PDF (2269 kB)
2009-07-01 00:00:00
N/A
13 WWAN Antenna 11 Operational Description
Adobe Acrobat PDF (945 kB)
2009-07-01 00:00:00
N/A

APP # 7 (2008-11-04)

App # Document Type Submitted
Available
7 Configuration Info Operational Description
Adobe Acrobat PDF (45 kB)
2008-10-23 00:00:00
N/A

APP # 5 (2008-09-08)

App # Document Type Submitted
Available
5 Latitude D630 MPE Report RF Exposure Info
Adobe Acrobat PDF (385 kB)
2008-09-08 00:00:00
N/A

APP # 12 (2009-03-27)

App # Document Type Submitted
Available
12 WWAN Antenna Information Operational Description
Adobe Acrobat PDF (5817 kB)
2009-03-27 00:00:00
N/A
12 Antenna Location Operational Description
Adobe Acrobat PDF (870 kB)
2009-03-27 00:00:00
N/A

APP # 9 (2009-02-02)

App # Document Type Submitted
Available
9 Attestation Statement Attestation Statements
Adobe Acrobat PDF (24 kB)
2009-01-09 00:00:00
2009-02-02 00:00:00

APP # 13 (2009-07-01)

App # Document Type Submitted
Available
13 WLAN Antenna 5 Operational Description
Adobe Acrobat PDF (3447 kB)
2009-07-01 00:00:00
N/A
13 WLAN Antenna 10 Operational Description
Adobe Acrobat PDF (1011 kB)
2009-07-01 00:00:00
N/A
13 WWAN Antenna 3 Operational Description
Adobe Acrobat PDF (1027 kB)
2009-07-01 00:00:00
N/A

APP # 5 (2008-09-08)

App # Document Type Submitted
Available
5 P01S MPE Report RF Exposure Info
Adobe Acrobat PDF (268 kB)
2008-09-08 00:00:00
N/A

APP # 9 (2009-02-02)

App # Document Type Submitted
Available
9 BIOS Description Operational Description
Adobe Acrobat PDF (351 kB)
2009-01-09 00:00:00
N/A
9 Yageo Antenna Details Notebook Mode Operational Description
Adobe Acrobat PDF (1327 kB)
2009-01-09 00:00:00
N/A

APP # 13 (2009-07-01)

App # Document Type Submitted
Available
13 WLAN Antenna 7 Operational Description
Adobe Acrobat PDF (801 kB)
2009-07-01 00:00:00
N/A

APP # 9 (2009-02-02)

App # Document Type Submitted
Available
9 SAR Report Part 1 RF Exposure Info
Adobe Acrobat PDF (3027 kB)
2009-01-09 00:00:00
2009-02-02 00:00:00

APP # 13 (2009-07-01)

App # Document Type Submitted
Available
13 WLAN Antenna 12 Operational Description
Adobe Acrobat PDF (2883 kB)
2009-07-01 00:00:00
N/A
13 WWAN Antenna 5 Operational Description
Adobe Acrobat PDF (868 kB)
2009-07-01 00:00:00
N/A

APP # 7 (2008-11-04)

App # Document Type Submitted
Available
7 INSPIRON 910 Antenna Position Diagram Operational Description
Adobe Acrobat PDF (132 kB)
2008-09-11 00:00:00
N/A

APP # 11 (2009-03-05)

App # Document Type Submitted
Available
11 WLAN Antenna Information Operational Description
Adobe Acrobat PDF (671 kB)
2009-03-05 00:00:00
N/A

APP # 5 (2008-09-08)

App # Document Type Submitted
Available
5 XPS M1530 MPE Report RF Exposure Info
Adobe Acrobat PDF (420 kB)
2008-09-08 00:00:00
N/A

APP # 7 (2008-11-04)

App # Document Type Submitted
Available
7 Antenna Distances Information Operational Description
Adobe Acrobat PDF (4 kB)
2008-09-11 00:00:00
N/A

APP # 5 (2008-09-08)

App # Document Type Submitted
Available
5 Attestation Letter Attestation Statements
Adobe Acrobat PDF (26 kB)
2008-09-08 00:00:00
N/A

APP # 7 (2008-11-04)

App # Document Type Submitted
Available
7 Latitude E4200 Antenna Position Diagram Operational Description
Adobe Acrobat PDF (32 kB)
2008-09-11 00:00:00
N/A

APP # 9 (2009-02-02)

App # Document Type Submitted
Available
9 Cover Letter requesting C2PC Cover Letter(s)
Adobe Acrobat PDF (24 kB)
2009-01-09 00:00:00
2009-02-02 00:00:00

APP # 13 (2009-07-01)

App # Document Type Submitted
Available
13 WLAN Antenna 9 Operational Description
Adobe Acrobat PDF (1817 kB)
2009-07-01 00:00:00
N/A

APP # 9 (2009-02-02)

App # Document Type Submitted
Available
9 Amphenol Antenna Details Tablet Mode Operational Description
Adobe Acrobat PDF (2955 kB)
2009-01-09 00:00:00
N/A
9 SAR Report Part 2 RF Exposure Info
Adobe Acrobat PDF (3974 kB)
2009-01-09 00:00:00
2009-02-02 00:00:00

APP # 13 (2009-07-01)

App # Document Type Submitted
Available
13 WLAN Antenna 2 Operational Description
Adobe Acrobat PDF (545 kB)
2009-07-01 00:00:00
N/A
13 WWAN Antenna 7 Operational Description
Adobe Acrobat PDF (674 kB)
2009-07-01 00:00:00
N/A

APP # 11 (2009-03-05)

App # Document Type Submitted
Available
11 Antenna Location Operational Description
Adobe Acrobat PDF (142 kB)
2009-03-05 00:00:00
N/A
11 WWAN Antenna Information Part 2 Operational Description
Adobe Acrobat PDF (5333 kB)
2009-03-05 00:00:00
N/A

APP # 13 (2009-07-01)

App # Document Type Submitted
Available
13 WWAN Antenna 10 Operational Description
Adobe Acrobat PDF (1400 kB)
2009-07-01 00:00:00
N/A

APP # 5 (2008-09-08)

App # Document Type Submitted
Available
5 INSPIRON 1210 MPE Report RF Exposure Info
Adobe Acrobat PDF (371 kB)
2008-09-08 00:00:00
N/A

APP # 12 (2009-03-27)

App # Document Type Submitted
Available
12 WLAN Antenna Information Operational Description
Adobe Acrobat PDF (1214 kB)
2009-03-27 00:00:00
N/A

APP # 9 (2009-02-02)

App # Document Type Submitted
Available
9 Antenna Location Tablet Mode Operational Description
Adobe Acrobat PDF (414 kB)
2009-01-09 00:00:00
N/A

APP # 13 (2009-07-01)

App # Document Type Submitted
Available
13 WLAN Antenna 4 Operational Description
Adobe Acrobat PDF (3615 kB)
2009-07-01 00:00:00
N/A
13 WWAN Antenna 9 Operational Description
Adobe Acrobat PDF (436 kB)
2009-07-01 00:00:00
N/A

APP # 11 (2009-03-05)

App # Document Type Submitted
Available
11 Co Located Output Power Operational Description
Adobe Acrobat PDF (4 kB)
2009-03-05 00:00:00
N/A

APP # 13 (2009-07-01)

App # Document Type Submitted
Available
13 WLAN Antenna 1 Operational Description
Adobe Acrobat PDF (1441 kB)
2009-07-01 00:00:00
N/A
13 WWAN Antenna 2 Operational Description
Adobe Acrobat PDF (717 kB)
2009-07-01 00:00:00
N/A
13 WLAN Antenna 6 Operational Description
Adobe Acrobat PDF (709 kB)
2009-07-01 00:00:00
N/A
13 WLAN Antenna 11 Operational Description
Adobe Acrobat PDF (1637 kB)
2009-07-01 00:00:00
N/A
13 WWAN Antenna 4 Operational Description
Adobe Acrobat PDF (868 kB)
2009-07-01 00:00:00
N/A

APP # 5 (2008-09-08)

App # Document Type Submitted
Available
5 XPS 1330 MPE Report RF Exposure Info
Adobe Acrobat PDF (405 kB)
2008-09-08 00:00:00
N/A

APP # 7 (2008-11-04)

App # Document Type Submitted
Available
7 Latitude and Inspiron Configs Operational Description
Adobe Acrobat PDF (7 kB)
2008-10-23 00:00:00
N/A

APP # 9 (2009-02-02)

App # Document Type Submitted
Available
9 Yageo Antenna Details Tablet Mode Operational Description
Adobe Acrobat PDF (1436 kB)
2009-01-09 00:00:00
N/A

APP # 13 (2009-07-01)

App # Document Type Submitted
Available
13 WLAN Antenna 8 Operational Description
Adobe Acrobat PDF (3456 kB)
2009-07-01 00:00:00
N/A
13 WLAN Antenna 13 Operational Description
Adobe Acrobat PDF (2633 kB)
2009-07-01 00:00:00
N/A
13 WWAN Antenna 6 Operational Description
Adobe Acrobat PDF (2048 kB)
2009-07-01 00:00:00
N/A

APP # 11 (2009-03-05)

App # Document Type Submitted
Available
11 WWAN Antenna Information Part 1 Operational Description
Adobe Acrobat PDF (845 kB)
2009-03-05 00:00:00
N/A

APP # 9 (2009-02-02)

App # Document Type Submitted
Available
9 Amphenol Antenna Details Notebook Mode Operational Description
Adobe Acrobat PDF (2961 kB)
2009-01-09 00:00:00
N/A

APP # 13 (2009-07-01)

App # Document Type Submitted
Available
13 WWAN Antenna 1 Operational Description
Adobe Acrobat PDF (948 kB)
2009-07-01 00:00:00
N/A

Correspondence

All Correspondence

App # Document Date
13 [Re-Sent]Email Correspondence generated [Jul 8 2009] 2009-07-08 12:23:46
5 [Re-Sent]Dismissal By TCB Request generated [Sep 8 2008]
1 [Re-Sent]Short-Term Confidential Expiration Email generated [Oct 8 2008]
1 [Re-Sent]Short-Term Confidential Expiration Email generated [Nov 22 2008] 2008-11-22 04:17:53
1 [Re-Sent]Short-Term Confidential Expiration Email generated [Jul 11 2008]
1 [Re-Sent]Short-Term Confidential Expiration Email generated [Nov 22 2008] 2008-11-22 04:29:35
1 [Re-Sent]Short-Term Confidential Expiration Email generated [Jul 11 2008]
1 [Re-Sent]Short-Term Confidential Expiration Email generated [Aug 24 2008]
1 [Re-Sent]Short-Term Confidential Expiration Email generated [Aug 24 2008]
1 [Re-Sent]Short-Term Confidential Expiration Email generated [Oct 8 2008]
9 TCB Automated Correspondence generated [Jan 29 2009] 2009-01-29 19:02:42
9 TCB Automated Correspondence generated [Jan 20 2009] 2009-01-21 11:37:07
9 TCB Automated Correspondence generated [Jan 22 2009] 2009-01-22 19:07:14
9 TCB Automated Correspondence generated [Jan 27 2009] 2009-01-27 19:05:58
7 Incoming Correspondence generated [Oct 23 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 Incoming Correspondence generated [Oct 28 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 Incoming Correspondence generated [Oct 23 2008]
7 [Re-Sent]E-Mail generated [Oct 1 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 [Re-Sent]E-Mail generated [Oct 28 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 Incoming Correspondence generated [Oct 23 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7    Incoming Correspondence generated [Oct 8 2008]
7 [Re-Sent]E-Mail generated [Oct 28 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 Incoming Correspondence generated [Oct 23 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7    Incoming Correspondence generated [Oct 8 2008]
7 [Re-Sent]Confidential letter to applicant generated [Oct 28 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 Incoming Correspondence generated [Oct 23 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 Incoming Correspondence generated [Nov 4 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 Incoming Correspondence generated [Oct 23 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 [Re-Sent]E-Mail generated [Oct 17 2008]
7 [Re-Sent]Confidential letter to lawyer/agent generated [Nov 4 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 Incoming Correspondence generated [Oct 23 2008]
7 Incoming Correspondence generated [Oct 8 2008]

APP # 13 (2009-07-01)

App # Document Type
13 [Re-Sent]Email Correspondence generated [Jul 8 2009] 2009-07-08 12:23:46

APP # 5 (2008-09-08)

App # Document Type
5 [Re-Sent]Dismissal By TCB Request generated [Sep 8 2008]

APP # 7 (2008-11-04)

App # Document Type
7 Incoming Correspondence generated [Oct 23 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 Incoming Correspondence generated [Oct 28 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 Incoming Correspondence generated [Oct 23 2008]
7 [Re-Sent]E-Mail generated [Oct 1 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 [Re-Sent]E-Mail generated [Oct 28 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 Incoming Correspondence generated [Oct 23 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7    Incoming Correspondence generated [Oct 8 2008]
7 [Re-Sent]E-Mail generated [Oct 28 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 Incoming Correspondence generated [Oct 23 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7    Incoming Correspondence generated [Oct 8 2008]
7 [Re-Sent]Confidential letter to applicant generated [Oct 28 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 Incoming Correspondence generated [Oct 23 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 Incoming Correspondence generated [Nov 4 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 Incoming Correspondence generated [Oct 23 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 [Re-Sent]E-Mail generated [Oct 17 2008]
7 [Re-Sent]Confidential letter to lawyer/agent generated [Nov 4 2008]
7 Incoming Correspondence generated [Oct 8 2008]
7 Incoming Correspondence generated [Oct 23 2008]
7 Incoming Correspondence generated [Oct 8 2008]

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ericsson AB
FCC Registration Number (FRN): 0017216037
Alphanumeric FCC ID: VV7MBMF3507GD
Unique Application Identifier: RA0RFE0kZ3gPNhJezVjUNg==
Line one: Mobile Broadband Modules
Line two: Lindholmspiren 11
City: Gothenburg
State: N/A
Country: Sweden
Zip Code: SE 417 56

TCB Information
TCB Application Email Address: Vina.Kerai@babt.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: VV7
Product Code: -MBMF3507G-D

Person at the applicant's address to receive grant or for contact
Name: Bernie Fuller
Title: Certification Approval Manager
Telephone Number: +46 107124371 Extension:
Fax Number: +46 107126033
Email: bernie.fuller@ericsson.com

Technical Contact
Firm Name:
Centro de Tecnologia de las Comunicaciones S.A.
First Name: Ricardo
Last Name: Orejas
Line 1:
Parque Tecnologia de Andalucia, C/ Severo Ochoa 2
Line 2:
E-29590 Campanillas-Malaga
Country:
Spain
Telephone Number:
+34952619317

Extension:
Fax Number: +34952619113
E-Mail:

Non Technical Contact
Firm Name: Centro de Tecnologia de las Comunicaciones S.A.
First Name: Ricardo
Last Name: Orejas
Line 1: Parque Tecnologia de Andalucia, C/ Severo Ochoa 2
Line 2: E-29590 Campanillas-Malaga
Country: Spain
Telephone Number: +34952619317 Extension:
Fax Number: +34952619113
E-Mail: rorejas@at4wireless.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   11/30/2008
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Dell Wireless 5530 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Change in identification of presently authorized equipment. Original FCC ID: VV7-MBMF3507G Grant Date: 04/20/2008

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Modular Transmitter. Output power listed is conducted. Highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Modular transmitter for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Bernie Fuller
Title of authorized signature:  Cert. ProjectTeam, Integration & Verification Eng.

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ericsson AB
FCC Registration Number (FRN): 0017216037
Alphanumeric FCC ID: VV7MBMF3507GD
Unique Application Identifier: JgXWtigFdkZFJNc4FogG5w==
Line one: Mobile Broadband Modules
Line two: Lindholmspiren 11
City: Gothenburg
State: N/A
Country: Sweden
Zip Code: SE 417 56

TCB Information
TCB Application Email Address: Hilton.carr@BABT.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: VV7
Product Code: -MBMF3507G-D

Person at the applicant's address to receive grant or for contact
Name: Bernie Fuller
Title: Certification Approval Manager
Telephone Number: +46 107124371 Extension:
Fax Number: +46 107126033
Email: bernie.fuller@ericsson.com

Technical Contact
Firm Name:
Centro de Tecnologia de las Comunicaciones S.A
First Name: Ricardo
Last Name: Orejas
Line 1:
Parque Tecnologia de Andalucia, C/ Severo Ochoa 2
Line 2:
E-29590 Campanillas-Malaga
Country:
Spain
Telephone Number:
+34952619317

Extension:
Fax Number: +34952619113
E-Mail:

Non Technical Contact
Firm Name: Centro de Tecnologia de las Comunicaciones S.A
First Name: Ricardo
Last Name: Orejas
Line 1: Parque Tecnologia de Andalucia, C/ Severo Ochoa 2
Line 2: E-29590 Campanillas-Malaga
Country: Spain
Telephone Number: +34952619317 Extension:
Fax Number: +34952619113
E-Mail: rorejas@at4wireless.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA wireless Wan card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Ricardo Orejas
Title of authorized signature:  Worldwide Compliances Services

Complete items below if agent signs the application:

Firm Name:  Centro de Tecnologia de las Comumicaciones S.A.
Name:  Ricardo Ricardo Ricardo
Line 1:  Ricardo
Line 2:  Ricardo
P.O. Box:  Ricardo
City:  Ricardo
State:  Ricardo
Country:  Ricardo
Zip Code:  Ricardo
Telephone Number:  +34952619317
Fax Number:  +34952619313
E-mail:  rorejas@at4wireless.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ericsson AB
FCC Registration Number (FRN): 0017216037
Alphanumeric FCC ID: VV7MBMF3507GD
Unique Application Identifier: AN4tJbx75j8Kvm7gY9zjJw==
Line one: Mobile Broadband Modules
Line two: Lindholmspiren 11
City: Gothenburg
State: N/A
Country: Sweden
Zip Code: SE 417 56

TCB Information
TCB Application Email Address: hilton.carr@babt.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: VV7
Product Code: -MBMF3507G-D

Person at the applicant's address to receive grant or for contact
Name: Bernie Fuller
Title: Certification Approval Manager
Telephone Number: +46 107124371 Extension:
Fax Number: +46 107126033
Email: bernie.fuller@ericsson.com

Technical Contact
Firm Name:
Centro de Tecnologia de las Comunicaciones S.A
First Name: Ricardo
Last Name: Orejas
Line 1:
Parque Tecnologia de Andalucia, C/ Severo Ochoa 2
Line 2:
E-29590 Campanillas-Malaga
Country:
Spain
Telephone Number:
+34952619317

Extension:
Fax Number: +34952619113
E-Mail:

Non Technical Contact
Firm Name: Centro de Tecnologia de las Comunicaciones S.A
First Name: Ricardo
Last Name: Orejas
Line 1: Parque Tecnologia de Andalucia, C/ Severo Ochoa 2
Line 2: E-29590 Campanillas-Malaga
Country: Spain
Telephone Number: +34952619317 Extension:
Fax Number: +34952619113
E-Mail: rojejas@at4wireless.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA wireless

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Ricardo Orejas
Title of authorized signature:  Worldwide Compliance Services

Complete items below if agent signs the application:

Firm Name:  Centro de Tecnologia de las Comunicaciones S.A
Name:  Ricardo Ricardo Ricardo
Line 1:  Ricardo
Line 2:  Ricardo
P.O. Box:  Ricardo
City:  Ricardo
State:  Ricardo
Country:  Ricardo
Zip Code:  Ricardo
Telephone Number:  +34952619317
Fax Number:  +34952619113
E-mail:  rorejas@at4wireless.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ericsson AB
FCC Registration Number (FRN): 0017216037
Alphanumeric FCC ID: VV7MBMF3507GD
Unique Application Identifier: J5AVYNgRmphXf5WXURhu5w==
Line one: Mobile Broadband Modules
Line two: Lindholmspiren 11
City: Gothenburg
State: N/A
Country: Sweden
Zip Code: SE 417 56

TCB Information
TCB Application Email Address: hilton.carr@babt.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: VV7
Product Code: -MBMF3507G-D

Person at the applicant's address to receive grant or for contact
Name: Bernie Fuller
Title: Certification Approval Manager
Telephone Number: +46 107124371 Extension:
Fax Number: +46 107126033
Email: bernie.fuller@ericsson.com

Technical Contact
Firm Name:
Centro de Tecnologia de las Comunicaciones S.A.
First Name: Ricardo
Last Name: Orejas
Line 1:
Parque Tecnicologia de Andalucia, C/ Severo Ochoa
Line 2:
E-29590 Campanillas-Malaga
Country:
Spain
Telephone Number:
+34952619317

Extension:
Fax Number: +34952619113
E-Mail:

Non Technical Contact
Firm Name: Centro de Tecnologia de las Comunicaciones S.A.
First Name: Ricardo
Last Name: Orejas
Line 1: Parque Tecnicologia de Andalucia, C/ Severo Ochoa
Line 2: E-29590 Campanillas-Malaga
Country: Spain
Telephone Number: +34952619317 Extension:
Fax Number: +34952619113
E-Mail: rorejas@at4wireless.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 850/900/1800/1900/2100MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Wireless

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Ricardo Orejas
Title of authorized signature:  Worldwide Compliance Services

Complete items below if agent signs the application:

Firm Name:  Centro de Tecnologia de las Comunicaciones S.A.
Name:  Ricardo Ricardo Ricardo
Line 1:  Ricardo
Line 2:  Ricardo
P.O. Box:  Ricardo
City:  Ricardo
State:  Ricardo
Country:  Ricardo
Zip Code:  Ricardo
Telephone Number:  +34952619317
Fax Number:  +34952619113
E-mail:  Rorejas@at4wireless.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ericsson AB
FCC Registration Number (FRN): 0017216037
Alphanumeric FCC ID: VV7MBMF3507GD
Unique Application Identifier: jk4/VkcLUz9v2LdpOdrN/Q==
Line one: Mobile Broadband Modules
Line two: Lindholmspiren 11
City: Gothenburg
State: N/A
Country: Sweden
Zip Code: SE 417 56

TCB Information
TCB Application Email Address: hilton.carr@babt.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: VV7
Product Code: -MBMF3507G-D

Person at the applicant's address to receive grant or for contact
Name: Bernie Fuller
Title: Certification Approval Manager
Telephone Number: +46 107124371 Extension:
Fax Number: +46 107126033
Email: bernie.fuller@ericsson.com

Technical Contact
Firm Name:
Centro de Tecnologia de las Comunicaciones S.A.
First Name: Ricardo
Last Name: Orejas
Line 1:
Parque Technologico de Andalucia, C/ Severo Ochoa
Line 2:
E-29590 Campanillas-Malaga
Country:
Spain
Telephone Number:
+34952619317

Extension:
Fax Number: +34952619113
E-Mail:

Non Technical Contact
Firm Name: Centro de Tecnologia de las Comunicaciones S.A.
First Name: Ricardo
Last Name: Orejas
Line 1: Parque Technologico de Andalucia, C/ Severo Ochoa
Line 2: E-29590 Campanillas-Malaga
Country: Spain
Telephone Number: +34952619317 Extension:
Fax Number: +34952619113
E-Mail: rorejas@at4wireless.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Wireless device

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Reissued by FCC
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Ricardo Orejas
Title of authorized signature:  Worldwide Compliance Services

Complete items below if agent signs the application:

Firm Name:  Centro de Tecnologia de las Comunicaciones S.A.
Name:  Ricardo Ricardo Ricardo
Line 1:  Ricardo
Line 2:  Ricardo
P.O. Box:  Ricardo
City:  Ricardo
State:  Ricardo
Country:  Ricardo
Zip Code:  Ricardo
Telephone Number:  +34952619317
Fax Number:  +34952619113
E-mail:  rorejas@At4Wireless.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ericsson AB
FCC Registration Number (FRN): 0017216037
Alphanumeric FCC ID: VV7MBMF3507GD
Unique Application Identifier: nsgqclrWfg1DAwo0ezCaDQ==
Line one: Mobile Broadband Modules
Line two: Lindholmspiren 11
City: Gothenburg
State: N/A
Country: Sweden
Zip Code: SE 417 56

TCB Information
TCB Application Email Address: hilton.Carr@babt.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: VV7
Product Code: -MBMF3507G-D

Person at the applicant's address to receive grant or for contact
Name: Bernie Fuller
Title: Certification Approval Manager
Telephone Number: +46 107124371 Extension:
Fax Number: +46 107126033
Email: bernie.fuller@ericsson.com

Technical Contact
Firm Name:
Centro de Tecnologia de las Comunicaciones S.A.
First Name: Ricardo
Last Name: Orejas
Line 1:
Parque Tecnologico de Andalucia, C/Severo Ochoa 2
Line 2:
E-29590 Campanillas-Malaga
Country:
Spain
Telephone Number:
+34952619317

Extension:
Fax Number: +34952619113
E-Mail:

Non Technical Contact
Firm Name: Centro de Tecnologia de las Comunicaciones S.A.
First Name: Ricardo
Last Name: Orejas
Line 1: Parque Tecnologico de Andalucia, C/Severo Ochoa 2
Line 2: E-29590 Campanillas-Malaga
Country: Spain
Telephone Number: +34952619317 Extension:
Fax Number: +34952619113
E-Mail: rorejas@at4wireless.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA wireless module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Ricardo Orejas
Title of authorized signature:  Worldwide Compliance Services

Complete items below if agent signs the application:

Firm Name:  Centro de Tecnologia de las Comunicaciones S.A.
Name:  Ricardo Ricardo Ricardo
Line 1:  Ricardo
Line 2:  Ricardo
P.O. Box:  Ricardo
City:  Ricardo
State:  Ricardo
Country:  Ricardo
Zip Code:  Ricardo
Telephone Number:  +34952619317
Fax Number:  +34952619113
E-mail:  rorejas@AT4wireless.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ericsson AB
FCC Registration Number (FRN): 0017216037
Alphanumeric FCC ID: VV7MBMF3507GD
Unique Application Identifier: ZovAZpn+TtvXLTgoezkEug==
Line one: Mobile Broadband Modules
Line two: Lindholmspiren 11
City: Gothenburg
State: N/A
Country: Sweden
Zip Code: SE 417 56

TCB Information

FCC ID
Grantee Code: VV7
Product Code: -MBMF3507G-D

Person at the applicant's address to receive grant or for contact
Name: Bernie Fuller
Title: Certification Approval Manager
Telephone Number: +46 107124371 Extension:
Fax Number: +46 107126033
Email: bernie.fuller@ericsson.com

Technical Contact
Firm Name:
Centro de Tecnologia de las Comunicaciones S.A.
First Name: Ricardo
Last Name: Orejas
Line 1:
Parque Tecnologica de Andalucia, C/Severo Ochoa 2
Line 2:
E-29590 Campanillas-Malaga
Country:
Spain
Telephone Number:
+34952619317

Extension:
Fax Number: +34952619113
E-Mail:

Non Technical Contact
Firm Name: Centro de Tecnologia de las Comunicaciones S.A.
First Name: Ricardo
Last Name: Orejas
Line 1: Parque Tecnologica de Andalucia, C/Severo Ochoa 2
Line 2: E-29590 Campanillas-Malaga
Country: Spain
Telephone Number: +34952619317 Extension:
Fax Number: +34952619113
E-Mail: Rorejas@AT4wireless.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA wireless module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Hilton Carr
Title of authorized signature:  Deputy Certification Manager

Complete items below if agent signs the application:

Firm Name:  BABT
Name:  Hilton Hilton Hilton
Line 1:  Hilton
Line 2:  Hilton
P.O. Box:  Hilton
City:  Hilton
State:  Hilton
Country:  Hilton
Zip Code:  Hilton
Telephone Number:  +44 1932251227
Fax Number:  +44 1932251201
E-mail:  hilton.carr@babt.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ericsson AB
FCC Registration Number (FRN): 0017216037
Alphanumeric FCC ID: VV7MBMF3507GD
Unique Application Identifier: +9D/gYPbuJwyhZWUquNeuw==
Line one: Mobile Broadband Modules
Line two: Lindholmspiren 11
City: Gothenburg
State: N/A
Country: Sweden
Zip Code: SE 417 56

TCB Information
TCB Application Email Address: Vina.Kerai@babt.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: VV7
Product Code: -MBMF3507G-D

Person at the applicant's address to receive grant or for contact
Name: Bernie Fuller
Title: Certification Approval Manager
Telephone Number: +46 107124371 Extension:
Fax Number: +46 107126033
Email: bernie.fuller@ericsson.com

Technical Contact
Firm Name:
AT4 Wireless S.A.
First Name: Ricardo
Last Name: Orejas
Line 1:
Parque Tecnologico de Andalucia, C/ Severo Ochoa 2
Line 2:
E-29590 Campanillas
City: Malaga
Country:
Spain
Telephone Number:
+34952619317

Extension:
Fax Number: +34952619113
E-Mail:

Non Technical Contact
Firm Name: AT4 Wireless S.A.
First Name: Ricardo
Last Name: Orejas
Line 1: Parque Tecnologico de Andalucia, C/ Severo Ochoa 2
Line 2: E-29590 Campanillas
City: Malaga
Country: Spain
Telephone Number: +34952619317 Extension:
Fax Number: +34952619113
E-Mail: rorejas@at4wireless.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Bernie Fuller
Title of authorized signature:  Certification Project Team

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ericsson AB
FCC Registration Number (FRN): 0017216037
Alphanumeric FCC ID: VV7MBMF3507GD
Unique Application Identifier: xGX+cOy3JX/8DffILKnxUw==
Line one: Mobile Broadband Modules
Line two: Lindholmspiren 11
City: Gothenburg
State: N/A
Country: Sweden
Zip Code: SE 417 56

TCB Information
TCB Application Email Address: Vina.Kerai@babt.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: VV7
Product Code: -MBMF3507G-D

Person at the applicant's address to receive grant or for contact
Name: Bernie Fuller
Title: Certification Approval Manager
Telephone Number: +46 107124371 Extension:
Fax Number: +46 107126033
Email: bernie.fuller@ericsson.com

Technical Contact
Firm Name:
AT4 Wireless S.A.
First Name: Ricardo
Last Name: Orejas
Line 1:
Parque Tecnologico de Andalucia, C/ Severo Ochoa 2
Line 2:
E-29590 Campanillas
City: Malaga
Country:
Spain
Telephone Number:
+34 952619317

Extension:
Fax Number: +34 952619113
E-Mail:

Non Technical Contact
Firm Name: AT4 Wireless S.A.
First Name: Ricardo
Last Name: Orejas
Line 1: Parque Tecnologico de Andalucia, C/ Severo Ochoa 2
Line 2: E-29590 Campanillas
City: Malaga
Country: Spain
Telephone Number: +34 952619317 Extension:
Fax Number: +34 952619113
E-Mail: rorejas@at4wireless.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  Yes

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Modular Transmitter. Output power listed is conducted. Highest radiated powers measured in specific configurations shown in filings under this FCCID are: Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in US Territories; this filing is applicable only for US operations. For use as a module in mobile or fixed exposure conditions only: antenna gain including cable loss must not exceed as documented in filings under this FCCID, for purposes of 2.1043, 2.1091, and radio service radiated power limits; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 1.32 W/kg; Part 24 - 1.19 W/kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Bernie Fuller
Title of authorized signature:  Certification, Integration & Verification

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ericsson AB
FCC Registration Number (FRN): 0017216037
Alphanumeric FCC ID: VV7MBMF3507GD
Unique Application Identifier: g9sHpJRR+sKVXzqBHVBe9Q==
Line one: Mobile Broadband Modules
Line two: Lindholmspiren 11
City: Gothenburg
State: N/A
Country: Sweden
Zip Code: SE 417 56

TCB Information
TCB Application Email Address: Vina.Kerai@babt.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: VV7
Product Code: -MBMF3507G-D

Person at the applicant's address to receive grant or for contact
Name: Bernie Fuller
Title: Certification Approval Manager
Telephone Number: +46 107124371 Extension:
Fax Number: +46 107126033
Email: bernie.fuller@ericsson.com

Technical Contact
Firm Name:
AT4 wireless S.A.
First Name: Ricardo
Last Name: Orejas
Line 1:
Parque Tecnológico de Andalucía, C/ Seve
Line 2:
E-29590 Campanillas
City: Málaga
Country:
Spain
Telephone Number:
+34952619317

Extension:
Fax Number: +34952619113
E-Mail:

Non Technical Contact
Firm Name: AT4 wireless S.A.
First Name: Ricardo
Last Name: Orejas
Line 1: Parque Tecnológico de Andalucía, C/ Seve
Line 2: E-29590 Campanillas
City: Málaga
Country: Spain
Telephone Number: +34952619317 Extension:
Fax Number: +34952619113
E-Mail: rorejas@at4wireless.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Modular Transmitter. Output power listed is conducted. Highest radiated powers measured in specific configurations shown in filings under this FCCID are: Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in US Territories; this filing is applicable only for US operations. For use as a module in mobile or fixed exposure conditions only: antenna gain including cable loss must not exceed as documented in filings under this FCCID, for purposes of 2.1043, 2.1091, and radio service radiated power limits; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 1.32 W/kg; Part 24 - 1.19 W/kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Mr. Bernie Fuller
Title of authorized signature:  Certification, Integration & Verification

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ericsson AB
FCC Registration Number (FRN): 0017216037
Alphanumeric FCC ID: VV7MBMF3507GD
Unique Application Identifier: WNMCKIYS8eEtHLKWBP1tsA==
Line one: Mobile Broadband Modules
Line two: Lindholmspiren 11
City: Gothenburg
State: N/A
Country: Sweden
Zip Code: SE 417 56

TCB Information
TCB Application Email Address: Vina.Kerai@babt.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: VV7
Product Code: -MBMF3507G-D

Person at the applicant's address to receive grant or for contact
Name: Bernie Fuller
Title: Certification Approval Manager
Telephone Number: +46 107124371 Extension:
Fax Number: +46 107126033
Email: bernie.fuller@ericsson.com

Technical Contact
Firm Name:
AT4 wireless
First Name: Ricardo
Last Name: Orejas
Line 1:
Centro de Tecnología de las Comunicaciones S.
Line 2:
Parque Tecnológico de Andalucía, C/ Seve
City: Campanillas-Málaga
Country:
Spain
Zip Code: E-29590
Telephone Number:
+34952619317

Extension:
Fax Number: +34952619113
E-Mail:

Non Technical Contact
Firm Name: AT4 wireless
First Name: Ricardo
Last Name: Orejas
Line 1: Centro de Tecnología de las Comunicaciones S.
Line 2: Parque Tecnológico de Andalucía, C/ Seve
City: Campanillas-Málaga
Country: Spain
Zip Code: E-29590
Telephone Number: +34952619317 Extension:
Fax Number: +34952619113
E-Mail: rorejas@at4wireless.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  Yes

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Modular Transmitter. Output power listed is conducted. Highest radiated powers measured in specific configurations shown in filings under this FCCID are: Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in US Territories; this filing is applicable only for US operations. For use as a module in mobile or fixed exposure conditions only: antenna gain including cable loss must not exceed as documented in filings under this FCCID, for purposes of 2.1043, 2.1091, and radio service radiated power limits; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 1.32 W/kg; Part 24 - 1.19 W/kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Bernie Fuller
Title of authorized signature:  Certification, Integration & Verification

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ericsson AB
FCC Registration Number (FRN): 0017216037
Alphanumeric FCC ID: VV7MBMF3507GD
Unique Application Identifier: lbcBHTROase/obIkpxWhAA==
Line one: Mobile Broadband Modules
Line two: Lindholmspiren 11
City: Gothenburg
State: N/A
Country: Sweden
Zip Code: SE 417 56

TCB Information
TCB Application Email Address: Vina.Kerai@babt.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: VV7
Product Code: -MBMF3507G-D

Person at the applicant's address to receive grant or for contact
Name: Bernie Fuller
Title: Certification Approval Manager
Telephone Number: +46 107124371 Extension:
Fax Number: +46 107126033
Email: bernie.fuller@ericsson.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Modular Transmitter. Output power listed is conducted. Highest radiated powers measured in specific configurations shown in filings under this FCCID are: Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in US Territories; this filing is applicable only for US operations. For use as a module in mobile or fixed exposure conditions only: antenna gain including cable loss must not exceed as documented in filings under this FCCID, for purposes of 2.1043, 2.1091, and radio service radiated power limits; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 1.32 W/kg; Part 24 - 1.19 W/kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Bernie Fuller
Title of authorized signature:  Certification, Integration & Verification

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ericsson AB
FCC Registration Number (FRN): 0017216037
Alphanumeric FCC ID: VV7MBMF3507GD
Unique Application Identifier: FJ1AScth22Tq4vGXgYGlbQ==
Line one: Mobile Broadband Modules
Line two: Lindholmspiren 11
City: Gothenburg
State: N/A
Country: Sweden
Zip Code: SE 417 56

TCB Information
TCB Application Email Address: Vina.Kerai@babt.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: VV7
Product Code: -MBMF3507G-D

Person at the applicant's address to receive grant or for contact
Name: Bernie Fuller
Title: Certification Approval Manager
Telephone Number: +46 107124371 Extension:
Fax Number: +46 107126033
Email: bernie.fuller@ericsson.com

Technical Contact
Firm Name:
Centro de Tecnologia de las Comunicaciones S.A.
First Name: Ricardo
Last Name: Orejas
Line 1:
Parque Tecnologico de Andalucia, C/Severo Ochoa 2
Line 2:
E-29590 Campanillas-Malaga
Country:
Spain
Telephone Number:
+34952619317

Extension:
Fax Number: +34952619113
E-Mail:

Non Technical Contact
Firm Name: Centro de Tecnologia de las Comunicaciones S.A.
First Name: Ricardo
Last Name: Orejas
Line 1: Parque Tecnologico de Andalucia, C/Severo Ochoa 2
Line 2: E-29590 Campanillas-Malaga
Country: Spain
Telephone Number: +34952619317 Extension:
Fax Number: +34952619113
E-Mail: rorejas@at4wireless.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Modular Transmitter. Output power listed is conducted. Highest radiated powers measured in specific configurations shown in filings under this FCCID are: Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in US Territories; this filing is applicable only for US operations. For use as a module in mobile or fixed exposure conditions only: antenna gain including cable loss must not exceed as documented in filings under this FCCID, for purposes of 2.1043, 2.1091, and radio service radiated power limits; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 1.32 W/kg; Part 24 - 1.19 W/kg.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Bernie Fuller
Title of authorized signature:  CA Manager

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom
Date of Grant: 11/26/2008

Application Dated: 11/26/2008
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.6 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 1.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated powers measured in specific configurations shown in filings under this FCCID are: Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in US Territories; this filing is applicable only for US operations. For use as a module in mobile or fixed exposure conditions only: antenna gain including cable loss must not exceed as documented in filings under this FCCID, for purposes of 2.1043, 2.1091, and radio service radiated power limits; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 1.32 W/kg; Part 24 - 1.19 W/kg.
Single Modular

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
  Date of Grant: 11/26/2008

Application Dated: 11/26/2008
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.6 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 1.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated powers measured in specific configurations shown in filings under this FCCID are: Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in US Territories; this filing is applicable only for US operations. For use as a module in mobile or fixed exposure conditions only: antenna gain including cable loss must not exceed as documented in filings under this FCCID, for purposes of 2.1043, 2.1091, and radio service radiated power limits; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 1.32 W/kg; Part 24 - 1.19 W/kg.

Single Modular



Mail To:


EA627588
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom
Date of Grant: 08/27/2008

Application Dated: 08/27/2008
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA wireless
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.5 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 1.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Modular transmitter for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operated in conjunction with other antennas or transmitters not listed in this filing.

This transmitter is approved for use in configurations specified in this filing and may be installed in the host devices listed in this filing. This transmitter may be co-located and operated with the listed Radio Modules in this filing when installed in the listed hosts. These hosts provide a minimum separation distance of 20cms from all persons.

Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Single Modular

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
  Date of Grant: 08/27/2008

Application Dated: 08/27/2008
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA wireless
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.5 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 1.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Modular transmitter for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operated in conjunction with other antennas or transmitters not listed in this filing.

This transmitter is approved for use in configurations specified in this filing and may be installed in the host devices listed in this filing. This transmitter may be co-located and operated with the listed Radio Modules in this filing when installed in the listed hosts. These hosts provide a minimum separation distance of 20cms from all persons.

Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Single Modular



Mail To:


EA302959
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom
Date of Grant: 07/01/2009

Application Dated: 07/01/2009
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.6 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 1.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated powers measured in specific configurations shown in filings under this FCCID are: Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in US Territories; this filing is applicable only for US operations. For use as a module in mobile or fixed exposure conditions only: antenna gain including cable loss must not exceed as documented in filings under this FCCID, for purposes of 2.1043, 2.1091, and radio service radiated power limits; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 1.32 W/kg; Part 24 - 1.19 W/kg.

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
  Date of Grant: 07/01/2009

Application Dated: 07/01/2009
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.6 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 1.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated powers measured in specific configurations shown in filings under this FCCID are: Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in US Territories; this filing is applicable only for US operations. For use as a module in mobile or fixed exposure conditions only: antenna gain including cable loss must not exceed as documented in filings under this FCCID, for purposes of 2.1043, 2.1091, and radio service radiated power limits; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 1.32 W/kg; Part 24 - 1.19 W/kg.



Mail To:


EA180622
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom
Date of Grant: 02/17/2009

Application Dated: 02/17/2009
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.6 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 1.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated powers measured in specific configurations shown in filings under this FCCID are: Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in US Territories; this filing is applicable only for US operations. For use as a module in mobile or fixed exposure conditions only: antenna gain including cable loss must not exceed as documented in filings under this FCCID, for purposes of 2.1043, 2.1091, and radio service radiated power limits; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 1.32 W/kg; Part 24 - 1.19 W/kg.

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
  Date of Grant: 02/17/2009

Application Dated: 02/17/2009
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.6 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 1.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated powers measured in specific configurations shown in filings under this FCCID are: Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in US Territories; this filing is applicable only for US operations. For use as a module in mobile or fixed exposure conditions only: antenna gain including cable loss must not exceed as documented in filings under this FCCID, for purposes of 2.1043, 2.1091, and radio service radiated power limits; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 1.32 W/kg; Part 24 - 1.19 W/kg.



Mail To:


EA751387
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom
Date of Grant: 08/30/2008

Application Dated: 08/30/2008
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: 850/900/1800/1900/2100MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Wireless
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.5 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 1.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Modular transmitter for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operated in conjunction with other antennas or transmitters not listed in this filing.

This transmitter is approved for use in configurations specified in this filing and may be installed in the host devices listed in this filing. This transmitter may be co-located and operated with the listed Radio Modules in this filing when installed in the listed hosts. These hosts provide a minimum separation distance of 20cms from all persons.

Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Single Modular

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
  Date of Grant: 08/30/2008

Application Dated: 08/30/2008
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: 850/900/1800/1900/2100MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Wireless
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.5 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 1.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Modular transmitter for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operated in conjunction with other antennas or transmitters not listed in this filing.

This transmitter is approved for use in configurations specified in this filing and may be installed in the host devices listed in this filing. This transmitter may be co-located and operated with the listed Radio Modules in this filing when installed in the listed hosts. These hosts provide a minimum separation distance of 20cms from all persons.

Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Single Modular



Mail To:


EA737029
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom
Date of Grant: 06/26/2008

Application Dated: 06/26/2008
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA wireless Wan card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.6 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGW
22H 824.2  -  848.8 1.259 0.0729  PM 300KGW
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Modular transmitter for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operated in conjunction with other antennas or transmitters not listed in this filing.

This transmitter is approved for use in configurations specified in this filing and may be installed in the host devices listed in this filing. This transmitter may be co-located and operated with the listed Radio Modules in this filing when installed in the listed hosts. These hosts provide a minimum separation distance of 20cms from all persons.

Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Single Modular

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
  Date of Grant: 06/26/2008

Application Dated: 06/26/2008
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA wireless Wan card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.6 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGW
22H 824.2  -  848.8 1.259 0.0729  PM 300KGW
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Modular transmitter for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operated in conjunction with other antennas or transmitters not listed in this filing.

This transmitter is approved for use in configurations specified in this filing and may be installed in the host devices listed in this filing. This transmitter may be co-located and operated with the listed Radio Modules in this filing when installed in the listed hosts. These hosts provide a minimum separation distance of 20cms from all persons.

Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Single Modular



Mail To:


EA311504
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom
Date of Grant: 03/27/2009

Application Dated: 03/27/2009
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.6 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 1.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated powers measured in specific configurations shown in filings under this FCCID are: Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in US Territories; this filing is applicable only for US operations. For use as a module in mobile or fixed exposure conditions only: antenna gain including cable loss must not exceed as documented in filings under this FCCID, for purposes of 2.1043, 2.1091, and radio service radiated power limits; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 1.32 W/kg; Part 24 - 1.19 W/kg.

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
  Date of Grant: 03/27/2009

Application Dated: 03/27/2009
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.6 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 1.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated powers measured in specific configurations shown in filings under this FCCID are: Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in US Territories; this filing is applicable only for US operations. For use as a module in mobile or fixed exposure conditions only: antenna gain including cable loss must not exceed as documented in filings under this FCCID, for purposes of 2.1043, 2.1091, and radio service radiated power limits; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 1.32 W/kg; Part 24 - 1.19 W/kg.



Mail To:


EA197380
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom
Date of Grant: 09/08/2008

Application Dated: 09/08/2008
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA wireless module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.6 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 1.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Modular transmitter for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operated in conjunction with other antennas or transmitters not listed in this filing. This transmitter is approved for use in configurations specified in this filing and may be installed in the host devices listed in this filing. This transmitter may be co-located and operated with the listed Radio Modules in this filing when installed in the listed hosts. These hosts provide a minimum separation distance of 20cms from all persons. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Single Modular

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
  Date of Grant: 09/08/2008

Application Dated: 09/08/2008
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA wireless module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.6 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 1.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Modular transmitter for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operated in conjunction with other antennas or transmitters not listed in this filing. This transmitter is approved for use in configurations specified in this filing and may be installed in the host devices listed in this filing. This transmitter may be co-located and operated with the listed Radio Modules in this filing when installed in the listed hosts. These hosts provide a minimum separation distance of 20cms from all persons. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Single Modular



Mail To:


EA410140
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom
Date of Grant: 06/04/2008

Application Dated: 06/04/2008
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: Dell Wireless 5530 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.6 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 0.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Single Modular
Modular Transmitter. Output power listed is conducted. Highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Modular transmitter for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters.

Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
  Date of Grant: 06/04/2008

Application Dated: 06/04/2008
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: Dell Wireless 5530 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.6 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 0.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Single Modular

Modular Transmitter. Output power listed is conducted. Highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Modular transmitter for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters.

Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To:


EA937173
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom
Date of Grant: 03/05/2009

Application Dated: 03/05/2009
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.6 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 1.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated powers measured in specific configurations shown in filings under this FCCID are: Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in US Territories; this filing is applicable only for US operations. For use as a module in mobile or fixed exposure conditions only: antenna gain including cable loss must not exceed as documented in filings under this FCCID, for purposes of 2.1043, 2.1091, and radio service radiated power limits; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 1.32 W/kg; Part 24 - 1.19 W/kg.

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
  Date of Grant: 03/05/2009

Application Dated: 03/05/2009
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.6 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 1.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated powers measured in specific configurations shown in filings under this FCCID are: Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in US Territories; this filing is applicable only for US operations. For use as a module in mobile or fixed exposure conditions only: antenna gain including cable loss must not exceed as documented in filings under this FCCID, for purposes of 2.1043, 2.1091, and radio service radiated power limits; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 1.32 W/kg; Part 24 - 1.19 W/kg.



Mail To:


EA954350
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom
Date of Grant: 02/02/2009

Application Dated: 01/09/2009
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.6 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 1.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated powers measured in specific configurations shown in filings under this FCCID are: Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in US Territories; this filing is applicable only for US operations. For use as a module in mobile or fixed exposure conditions only: antenna gain including cable loss must not exceed as documented in filings under this FCCID, for purposes of 2.1043, 2.1091, and radio service radiated power limits; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 1.32 W/kg; Part 24 - 1.19 W/kg.

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
  Date of Grant: 02/02/2009

Application Dated: 01/09/2009
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.6 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 1.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated powers measured in specific configurations shown in filings under this FCCID are: Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in US Territories; this filing is applicable only for US operations. For use as a module in mobile or fixed exposure conditions only: antenna gain including cable loss must not exceed as documented in filings under this FCCID, for purposes of 2.1043, 2.1091, and radio service radiated power limits; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 1.32 W/kg; Part 24 - 1.19 W/kg.



Mail To:


EA410756
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
  Date of Grant: 11/04/2008

Application Dated: 09/11/2008
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF3507G-D
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA wireless module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.871 0.0628  PM 300KGXW
24E 1850.2  -  1909.8 0.742 0.0628  PM 300KG7W
24E 1852.4  -  1907.6 0.387 0.0415  PM 4M20F9W
22H 824.2  -  848.8 2.0 0.0729  PM 300KGXW
22H 824.2  -  848.8 1.259 0.0729  PM 300KG7W
22H 826.4  -  846.6 0.435 0.0394  PM 4M20F9W

Modular Transmitter. Output power listed is conducted. Highest radiated powers measured in specific configurations shown in filings under this FCCID are: Part 22 ERP 1.5 W, Part 24 EIRP 0.81 W. This device contains functions that are not operational in US Territories; this filing is applicable only for US operations. For use as a module in mobile or fixed exposure conditions only: antenna gain including cable loss must not exceed as documented in filings under this FCCID, for purposes of 2.1043, 2.1091, and radio service radiated power limits; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 1.32 W/kg; Part 24 - 1.19 W/kg.

Single Modular



Mail To:


EA850358

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details