FCC ID VV7-MBMF3607GW1-D

This device is approved for use in specific co-located configurations in generic and specific host platforms as documented in filings under this FCCID.

This device is approved for use in specific co-located configurations in generic and specific host platforms as documented in filings under this FCCID.

This device is approved for use in specific co-located configurations in generic and specific host platforms as documented in filings under this FCCID.

This device is approved for use in specific co-located configurations in generic and specific host platforms as documented in filings under this FCCID.

Output power is conducted. Antenna gain including cable loss must not exceed 5.75 dBi in the 850 MHz Cellular band and 4.71 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use as a module in mobile or fixed exposure conditions and in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.35 dBi in the 850 MHz Cellular band and 4.70 dBi in the PCS 1900 MHz band. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment

authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 0.137 W/kg; Part 24 - 0.178 W/kg.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Output power is conducted. Antenna gain including cable loss must not exceed 5.75 dBi in the 850 MHz Cellular band and 4.71 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use as a module in mobile or fixed exposure conditions and in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.35 dBi in the 850 MHz Cellular band and 4.70 dBi in the PCS 1900 MHz band. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment

authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 0.137 W/kg; Part 24 - 0.178 W/kg.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Output power is conducted. Antenna gain including cable loss must not exceed 5.75 dBi in the 850 MHz Cellular band and 4.71 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use as a module in mobile or fixed exposure conditions and in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.35 dBi in the 850 MHz Cellular band and 4.70 dBi in the PCS 1900 MHz band. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment

authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 0.137 W/kg; Part 24 - 0.049 W/kg.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Output power is conducted. Antenna gain including cable loss must not exceed 5.75 dBi in the 850 MHz Cellular band and 4.71 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use as a module in mobile or fixed exposure conditions and in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.35 dBi in the 850 MHz Cellular band and 4.70 dBi in the PCS 1900 MHz band. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment

authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 0.137 W/kg; Part 24 - 0.049 W/kg.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 5.75 dBi in the 850 MHz Cellular band and 4.71 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.35 dBi in the 850 MHz Cellular band and 4.70 dBi in the PCS 1900 MHz band.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 5.75 dBi in the 850 MHz Cellular band and 4.71 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.35 dBi in the 850 MHz Cellular band and 4.70 dBi in the PCS 1900 MHz band.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Output power is conducted. Antenna gain including cable loss must not exceed 5.75 dBi in the 850 MHz Cellular band and 4.71 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use as a module in mobile or fixed exposure conditions and in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.35 dBi in the 850 MHz Cellular band and 4.70 dBi in the PCS 1900 MHz band. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment

authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 – 0.137 W/kg; Part 24 - 0.178 W/kg.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Output power is conducted. Antenna gain including cable loss must not exceed 5.75 dBi in the 850 MHz Cellular band and 4.71 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use as a module in mobile or fixed exposure conditions and in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.35 dBi in the 850 MHz Cellular band and 4.70 dBi in the PCS 1900 MHz band. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment

authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 – 0.137 W/kg; Part 24 - 0.178 W/kg.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 2.10 dBi in the 850 MHz Cellular band and 4.98 dBi in the PCS 1900 MHz band. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 – 0.137 W/kg; Part 24 - 0.178 W/kg.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 2.10 dBi in the 850 MHz Cellular band and 4.98 dBi in the PCS 1900 MHz band. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 – 0.137 W/kg; Part 24 - 0.178 W/kg.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Output power is conducted. For use as a module in mobile or fixed exposure conditions only .Antenna gain including cable loss must not exceed 5.75 dBi in the 850 MHz Cellular band and 4.71 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.35 dBi in the 850 MHz Cellular band and 4.70 dBi in the PCS 1900 MHz band. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 0.108 W/kg; Part 24 - 0.038 W/kg.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Output power is conducted. For use as a module in mobile or fixed exposure conditions only .Antenna gain including cable loss must not exceed 5.75 dBi in the 850 MHz Cellular band and 4.71 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 3.35 dBi in the 850 MHz Cellular band and 4.70 dBi in the PCS 1900 MHz band. For use in portable RF exposure conditions, SAR was evaluated for specific final product co-located configurations described in filings under this FCCID; additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest reported body SAR values are: Part 22 - 0.108 W/kg; Part 24 - 0.038 W/kg.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products, and/or for specific co-located use configurations, requires the submission of a Class II permissive change application, where appropriate in accordance with FCC multi-transmitter product procedures, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

This device is approved for use in specific co-located configurations in generic and specific host platforms as documented in filings under this FCCID.

This device is approved for use in specific co-located configurations in generic and specific host platforms as documented in filings under this FCCID.