FCC ID VV7-MBMF5321

VV7MBMF5321, VV7 MBMF5321, VV7-MBMF5321, VV7-MBMF532I

Ericsson AB F5321 Ericsson Mobile Broadband Module

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: VV7-MBMF5321 is . The remaining characters of the FCC ID, -MBMF5321, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Ericsson AB

Full Company Details: Ericsson AB - VV7
Company Code: VV7
Address:
   Ericsson AB
   Mobile Broadband Modules Lindholmspiren 11
   Gothenburg, N/A SE 417 56
   Sweden
App # Purpose Date Unique ID
1 Original Equipment 2011-10-03 2uWM3cGNF8zm8TBU4ITNWA==
2 Original Equipment 2011-10-03 NY7lISBW8cPAjix+I2g9gA==
3 Class II Permissive Change 2012-05-21 tsZblZrLDV5z1I5q0GVDYQ==

Approved Operating Frequencies

App # Frequency RangePower OutputToleranceEmission DesignatorRule PartsGrant Notes
1.1-15B
2.1824.2-848.82.12320.1ppm300KGXW22HBC
2.2824.2-848.81.26180.1ppm300KG7W22HBC
2.3826.4-846.60.62370.1ppm4M20F9W22HBC
2.41850.2-1909.81.16680.04ppm300KGXW24EBC
2.51850.2-1909.81.02090.04ppm300KG7W24EBC
2.61852.4-1907.60.40550.04ppm4M20F9W24EBC
3.1824.2-848.82.12320.1ppm300KGXW22HBC
3.2824.2-848.81.26180.1ppm300KG7W22HBC
3.3826.4-846.60.62370.1ppm4M20F9W22HBC
3.41850.2-1909.81.16680.04ppm300KGXW24EBC
3.51850.2-1909.81.02090.04ppm300KG7W24EBC
3.61852.4-1907.60.40550.04ppm4M20F9W24EBC

Exhibits

All Available Documents

App # Document Type Submitted / Available
1 Internal photosInternal Photos / Adobe Acrobat PDF (197 kB) 2011-10-03 / 2012-03-31
1 LabelID Label/Location Info / Adobe Acrobat PDF (253 kB) 2011-10-03 / 2011-10-03
1 Test reportTest Report / Adobe Acrobat PDF (1048 kB) 2011-10-03 / 2011-10-03
1 AgentCover Letter(s) / Adobe Acrobat PDF (80 kB) 2011-10-03 / 2011-10-03
1 Test photosTest Setup Photos / Adobe Acrobat PDF (450 kB) 2011-10-03 / 2012-03-31
1 ConfidentialityCover Letter(s) / Adobe Acrobat PDF (82 kB) 2011-10-03 / 2011-10-03
1 User manualUsers Manual / Adobe Acrobat PDF (325 kB) 2011-10-03 / 2012-03-31
1 External photosExternal Photos / Adobe Acrobat PDF (247 kB) 2011-10-03 / 2012-03-31
2 RF Exposure colocationRF Exposure Info / Adobe Acrobat PDF (704 kB) 2011-10-03 / 2011-10-03
2 Modular ApprovalCover Letter(s) / Adobe Acrobat PDF (53 kB) 2011-10-03 / 2011-10-03
2 Test ReportTest Report / Adobe Acrobat PDF (1174 kB) 2011-10-03 / 2011-10-03
2 External photosExternal Photos / Adobe Acrobat PDF (247 kB) 2011-10-03 / 2012-03-31
2 Test photosTest Setup Photos / Adobe Acrobat PDF (747 kB) 2011-10-03 / 2012-03-31
2 Internal photosInternal Photos / Adobe Acrobat PDF (197 kB) 2011-10-03 / 2012-03-31
2 User manualUsers Manual / Adobe Acrobat PDF (325 kB) 2011-10-03 / 2012-03-31
2 LabelID Label/Location Info / Adobe Acrobat PDF (253 kB) 2011-10-03 / 2011-10-03
2 AgentCover Letter(s) / Adobe Acrobat PDF (80 kB) 2011-10-03 / 2011-10-03
2 RF Exposure of moduleRF Exposure Info / Adobe Acrobat PDF (29 kB) 2011-10-03 / 2011-10-03
2 ConfidentialityCover Letter(s) / Adobe Acrobat PDF (82 kB) 2011-10-03 / 2011-10-03
3 CoLocation Cover LetterCover Letter(s) / Adobe Acrobat PDF (28 kB) 2012-05-11 / 2012-05-21
3 CoLocated Module SAR level 04RF Exposure Info / Adobe Acrobat PDF (516 kB) 2012-05-11 / 2012-05-21
3 SAR Report Part 1RF Exposure Info / Adobe Acrobat PDF (1891 kB) 2012-05-11 / 2012-05-21
3 RF Test ReportTest Report / Adobe Acrobat PDF (2544 kB) 2012-05-11 / 2012-05-21
3 SAR Report Part 2RF Exposure Info / Adobe Acrobat PDF (5238 kB) 2012-05-11 / 2012-05-21
3 Test PhotosTest Setup Photos / Adobe Acrobat PDF (1464 kB) 2012-05-11 / 2012-05-21
3 CoLocated Module SAR level 01RF Exposure Info / Adobe Acrobat PDF (323 kB) 2012-05-11 / 2012-05-21
3 SAR PhotosTest Setup Photos / Adobe Acrobat PDF (5238 kB) 2012-05-11 / 2012-05-21
3 CoLocated Module SAR level 02RF Exposure Info / Adobe Acrobat PDF (713 kB) 2012-05-11 / 2012-05-21
3 C2PC Cover LetterCover Letter(s) / Adobe Acrobat PDF (28 kB) 2012-05-11 / 2012-05-21
3 CoLocated Module SAR level 03RF Exposure Info / Adobe Acrobat PDF (532 kB) 2012-05-11 / 2012-05-21

APP # 1 (2011-10-03) Documents

Internal photos
 2011-10-03 / 2012-03-31 Internal Photos / Adobe Acrobat PDF (197 kB)
Confidentiality
 2011-10-03 / 2011-10-03 Cover Letter(s) / Adobe Acrobat PDF (82 kB)
Test report
 2011-10-03 / 2011-10-03 Test Report / Adobe Acrobat PDF (1048 kB)
Operation Description 03
 2011-10-03 / N/A Operational Description / Adobe Acrobat PDF (139 kB)
External photos
 2011-10-03 / 2012-03-31 External Photos / Adobe Acrobat PDF (247 kB)
Label
 2011-10-03 / 2011-10-03 ID Label/Location Info / Adobe Acrobat PDF (253 kB)
User manual
 2011-10-03 / 2012-03-31 Users Manual / Adobe Acrobat PDF (325 kB)
Operation Description 04
 2011-10-03 / N/A Operational Description / Adobe Acrobat PDF (29 kB)
Internal photos
 2011-10-03 / 2012-03-31 Internal Photos / Adobe Acrobat PDF (197 kB)
Test report
 2011-10-03 / 2011-10-03 Test Report / Adobe Acrobat PDF (1048 kB)
Agent
 2011-10-03 / 2011-10-03 Cover Letter(s) / Adobe Acrobat PDF (80 kB)
Schematics 01
 2011-10-03 / N/A Schematics / Adobe Acrobat PDF (90 kB)
Label
 2011-10-03 / 2011-10-03 ID Label/Location Info / Adobe Acrobat PDF (253 kB)
Test photos
 2011-10-03 / 2012-03-31 Test Setup Photos / Adobe Acrobat PDF (450 kB)
Confidentiality
 2011-10-03 / 2011-10-03 Cover Letter(s) / Adobe Acrobat PDF (82 kB)
Agent
 2011-10-03 / 2011-10-03 Cover Letter(s) / Adobe Acrobat PDF (80 kB)
Schematics 02
 2011-10-03 / N/A Schematics / Adobe Acrobat PDF (531 kB)
Operation Description 01
 2011-10-03 / N/A Operational Description / Adobe Acrobat PDF (21 kB)
User manual
 2011-10-03 / 2012-03-31 Users Manual / Adobe Acrobat PDF (325 kB)
External photos
 2011-10-03 / 2012-03-31 External Photos / Adobe Acrobat PDF (247 kB)
Block Diagram
 2011-10-03 / N/A Block Diagram / Adobe Acrobat PDF (15 kB)
Test photos
 2011-10-03 / 2012-03-31 Test Setup Photos / Adobe Acrobat PDF (450 kB)
Operation Description 02
 2011-10-03 / N/A Operational Description / Adobe Acrobat PDF (21 kB)

APP # 2 (2011-10-03) Documents

Parts List
 2011-10-03 / N/A Parts List/Tune Up Info / Adobe Acrobat PDF (12 kB)
RF Exposure colocation
 2011-10-03 / 2011-10-03 RF Exposure Info / Adobe Acrobat PDF (704 kB)
Modular Approval
 2011-10-03 / 2011-10-03 Cover Letter(s) / Adobe Acrobat PDF (53 kB)
Modular Approval
 2011-10-03 / 2011-10-03 Cover Letter(s) / Adobe Acrobat PDF (53 kB)
Block Diagram
 2011-10-03 / N/A Block Diagram / Adobe Acrobat PDF (15 kB)
Test Report
 2011-10-03 / 2011-10-03 Test Report / Adobe Acrobat PDF (1174 kB)
RF Exposure colocation
 2011-10-03 / 2011-10-03 RF Exposure Info / Adobe Acrobat PDF (704 kB)
Test Report
 2011-10-03 / 2011-10-03 Test Report / Adobe Acrobat PDF (1174 kB)
Operation Description 01
 2011-10-03 / N/A Operational Description / Adobe Acrobat PDF (21 kB)
External photos
 2011-10-03 / 2012-03-31 External Photos / Adobe Acrobat PDF (247 kB)
Confidentiality
 2011-10-03 / 2011-10-03 Cover Letter(s) / Adobe Acrobat PDF (82 kB)
Tune Up Procedure
 2011-10-03 / N/A Parts List/Tune Up Info / Adobe Acrobat PDF (31 kB)
RF Exposure of module
 2011-10-03 / 2011-10-03 RF Exposure Info / Adobe Acrobat PDF (29 kB)
Test photos
 2011-10-03 / 2012-03-31 Test Setup Photos / Adobe Acrobat PDF (747 kB)
Operation Description 02
 2011-10-03 / N/A Operational Description / Adobe Acrobat PDF (21 kB)
Internal photos
 2011-10-03 / 2012-03-31 Internal Photos / Adobe Acrobat PDF (197 kB)
External photos
 2011-10-03 / 2012-03-31 External Photos / Adobe Acrobat PDF (247 kB)
User manual
 2011-10-03 / 2012-03-31 Users Manual / Adobe Acrobat PDF (325 kB)
Schematics 01
 2011-10-03 / N/A Schematics / Adobe Acrobat PDF (90 kB)
User manual
 2011-10-03 / 2012-03-31 Users Manual / Adobe Acrobat PDF (325 kB)
Operation Description 03
 2011-10-03 / N/A Operational Description / Adobe Acrobat PDF (139 kB)
Label
 2011-10-03 / 2011-10-03 ID Label/Location Info / Adobe Acrobat PDF (253 kB)
Agent
 2011-10-03 / 2011-10-03 Cover Letter(s) / Adobe Acrobat PDF (80 kB)
Internal photos
 2011-10-03 / 2012-03-31 Internal Photos / Adobe Acrobat PDF (197 kB)
Schematics 02
 2011-10-03 / N/A Schematics / Adobe Acrobat PDF (531 kB)
Operation Description 04
 2011-10-03 / N/A Operational Description / Adobe Acrobat PDF (29 kB)
RF Exposure of module
 2011-10-03 / 2011-10-03 RF Exposure Info / Adobe Acrobat PDF (29 kB)
Confidentiality
 2011-10-03 / 2011-10-03 Cover Letter(s) / Adobe Acrobat PDF (82 kB)
Label
 2011-10-03 / 2011-10-03 ID Label/Location Info / Adobe Acrobat PDF (253 kB)
Agent
 2011-10-03 / 2011-10-03 Cover Letter(s) / Adobe Acrobat PDF (80 kB)
Test photos
 2011-10-03 / 2012-03-31 Test Setup Photos / Adobe Acrobat PDF (747 kB)

APP # 3 (2012-05-21) Documents

CoLocation Cover Letter
 2012-05-11 / 2012-05-21 Cover Letter(s) / Adobe Acrobat PDF (28 kB)
SAR Photos
 2012-05-11 / 2012-05-21 Test Setup Photos / Adobe Acrobat PDF (5238 kB)
CoLocated Module SAR level 02
 2012-05-11 / 2012-05-21 RF Exposure Info / Adobe Acrobat PDF (713 kB)
CoLocated Module SAR level 04
 2012-05-11 / 2012-05-21 RF Exposure Info / Adobe Acrobat PDF (516 kB)
SAR Report Part 1
 2012-05-11 / 2012-05-21 RF Exposure Info / Adobe Acrobat PDF (1891 kB)
SAR Report Part 1
 2012-05-11 / 2012-05-21 RF Exposure Info / Adobe Acrobat PDF (1891 kB)
CoLocated Module SAR level 03
 2012-05-11 / 2012-05-21 RF Exposure Info / Adobe Acrobat PDF (532 kB)
RF Test Report
 2012-05-11 / 2012-05-21 Test Report / Adobe Acrobat PDF (2544 kB)
SAR Report Part 2
 2012-05-11 / 2012-05-21 RF Exposure Info / Adobe Acrobat PDF (5238 kB)
SAR Report Part 2
 2012-05-11 / 2012-05-21 RF Exposure Info / Adobe Acrobat PDF (5238 kB)
CoLocated Module SAR level 04
 2012-05-11 / 2012-05-21 RF Exposure Info / Adobe Acrobat PDF (516 kB)
Test Photos
 2012-05-11 / 2012-05-21 Test Setup Photos / Adobe Acrobat PDF (1464 kB)
CoLocated Module SAR level 01
 2012-05-11 / 2012-05-21 RF Exposure Info / Adobe Acrobat PDF (323 kB)
Test Photos
 2012-05-11 / 2012-05-21 Test Setup Photos / Adobe Acrobat PDF (1464 kB)
CoLocation Cover Letter
 2012-05-11 / 2012-05-21 Cover Letter(s) / Adobe Acrobat PDF (28 kB)
SAR Photos
 2012-05-11 / 2012-05-21 Test Setup Photos / Adobe Acrobat PDF (5238 kB)
CoLocated Module SAR level 02
 2012-05-11 / 2012-05-21 RF Exposure Info / Adobe Acrobat PDF (713 kB)
C2PC Cover Letter
 2012-05-11 / 2012-05-21 Cover Letter(s) / Adobe Acrobat PDF (28 kB)
C2PC Cover Letter
 2012-05-11 / 2012-05-21 Cover Letter(s) / Adobe Acrobat PDF (28 kB)
RF Test Report
 2012-05-11 / 2012-05-21 Test Report / Adobe Acrobat PDF (2544 kB)
CoLocated Module SAR level 03
 2012-05-11 / 2012-05-21 RF Exposure Info / Adobe Acrobat PDF (532 kB)
CoLocated Module SAR level 01
 2012-05-11 / 2012-05-21 RF Exposure Info / Adobe Acrobat PDF (323 kB)

Grants

TCB Grant from App #1 (2011-10-03)

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 10/03/2011

Application Dated: 10/03/2011
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF5321
Name of Grantee:  Ericsson AB
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: F5321 Ericsson Mobile Broadband Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15B  -       

GSM/WCDMA Modular transmitter

EAS Grant from App #1 (2011-10-03)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden 		  Date of Grant: 10/03/2011

Application Dated: 10/03/2011
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF5321
Name of Grantee:  Ericsson AB
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: F5321 Ericsson Mobile Broadband Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15B  -       

GSM/WCDMA Modular transmitter



Mail To:


EA828075

TCB Grant from App #2 (2011-10-03)

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 10/03/2011

Application Dated: 10/03/2011
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF5321
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: F5321 Ericsson Mobile Broadband Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 824.2  -  848.8 2.1232 0.1  PM 300KGXW
BC 22H 824.2  -  848.8 1.2618 0.1  PM 300KG7W
BC 22H 826.4  -  846.6 0.6237 0.1  PM 4M20F9W
BC 24E 1850.2  -  1909.8 1.1668 0.04  PM 300KGXW
BC 24E 1850.2  -  1909.8 1.0209 0.04  PM 300KG7W
BC 24E 1852.4  -  1907.6 0.4055 0.04  PM 4M20F9W

Single Modular Approval.

Power out is conducted at the antenna terminal.

This filling only covers the device to be used for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing, except in accordance with FCC multi-transmitter product procedures. This device has been approved for use in specific co-location configurations, as described in this filing. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance.

Antennas used for this module must not exceed 6.46 dBi gain in the 850 MHz band and 2.34 dBi in the 1900 MHz band, for mobile and fixed operating configurations.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM/WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz and 1900 MHz operations.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant from App #2 (2011-10-03)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden 		  Date of Grant: 10/03/2011

Application Dated: 10/03/2011
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF5321
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: F5321 Ericsson Mobile Broadband Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 824.2  -  848.8 2.1232 0.1  PM 300KGXW
BC 22H 824.2  -  848.8 1.2618 0.1  PM 300KG7W
BC 22H 826.4  -  846.6 0.6237 0.1  PM 4M20F9W
BC 24E 1850.2  -  1909.8 1.1668 0.04  PM 300KGXW
BC 24E 1850.2  -  1909.8 1.0209 0.04  PM 300KG7W
BC 24E 1852.4  -  1907.6 0.4055 0.04  PM 4M20F9W

Single Modular Approval.

Power out is conducted at the antenna terminal.

This filling only covers the device to be used for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing, except in accordance with FCC multi-transmitter product procedures. This device has been approved for use in specific co-location configurations, as described in this filing. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance.

Antennas used for this module must not exceed 6.46 dBi gain in the 850 MHz band and 2.34 dBi in the 1900 MHz band, for mobile and fixed operating configurations.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM/WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz and 1900 MHz operations.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To:


EA424855

TCB Grant from App #3 (2012-05-21)

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 05/21/2012

Application Dated: 05/11/2012
Ericsson AB
Mobile Broadband Modules
Lindholmspiren 11
Gothenburg, SE 417 56
Sweden
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF5321
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: F5321 Ericsson Mobile Broadband Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 824.2  -  848.8 2.1232 0.1  PM 300KGXW
BC 22H 824.2  -  848.8 1.2618 0.1  PM 300KG7W
BC 22H 826.4  -  846.6 0.6237 0.1  PM 4M20F9W
BC 24E 1850.2  -  1909.8 1.1668 0.04  PM 300KGXW
BC 24E 1850.2  -  1909.8 1.0209 0.04  PM 300KG7W
BC 24E 1852.4  -  1907.6 0.4055 0.04  PM 4M20F9W

Single Modular Approval. Power out is conducted at the antenna terminal.

This filling only covers the device to be used for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing, except in accordance with FCC multi-transmitter product procedures. This device has been approved for use in specific co-location configurations, as described in this filing. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance.

Antennas used for this module must not exceed 6.46 dBi gain in the 850 MHz band and 2.34 dBi in the 1900 MHz band, for mobile and fixed operating configurations.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM/WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz and 1900 MHz operations.

Class 2 Permissive Change to allow portable use inside laptop model HSTNN-W90C, as described in this filing. Highest reported SAR value is 0.039 W/kg. The permitted antennas and co-located transmitters are described in this filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant from App #3 (2012-05-21)

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Ericsson AB
Mobile Broadband Modules Lindholmspiren 11
Gothenburg, SE 417 56
Sweden 		  Date of Grant: 05/21/2012

Application Dated: 05/11/2012
 
Attention: Bernie Fuller , Certification Approval Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VV7-MBMF5321
Name of Grantee:  Ericsson AB
Equipment Class: PCS Licensed Transmitter
Notes: F5321 Ericsson Mobile Broadband Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 824.2  -  848.8 2.1232 0.1  PM 300KGXW
BC 22H 824.2  -  848.8 1.2618 0.1  PM 300KG7W
BC 22H 826.4  -  846.6 0.6237 0.1  PM 4M20F9W
BC 24E 1850.2  -  1909.8 1.1668 0.04  PM 300KGXW
BC 24E 1850.2  -  1909.8 1.0209 0.04  PM 300KG7W
BC 24E 1852.4  -  1907.6 0.4055 0.04  PM 4M20F9W

Single Modular Approval. Power out is conducted at the antenna terminal.

This filling only covers the device to be used for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing, except in accordance with FCC multi-transmitter product procedures. This device has been approved for use in specific co-location configurations, as described in this filing. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance.

Antennas used for this module must not exceed 6.46 dBi gain in the 850 MHz band and 2.34 dBi in the 1900 MHz band, for mobile and fixed operating configurations.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM/WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz and 1900 MHz operations.

Class 2 Permissive Change to allow portable use inside laptop model HSTNN-W90C, as described in this filing. Highest reported SAR value is 0.039 W/kg. The permitted antennas and co-located transmitters are described in this filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To:


EA750076

Applications for this FCC ID

Form App # 1 (2011-10-03)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ericsson AB
FCC Registration Number (FRN): 0017216037
Alphanumeric FCC ID: VV7MBMF5321
Unique Application Identifier: 2uWM3cGNF8zm8TBU4ITNWA==
Line one: Mobile Broadband Modules
Line two: Lindholmspiren 11
City: Gothenburg
State: N/A
Country: Sweden
Zip Code: SE 417 56

TCB Information
TCB Application Email Address: hotline@atcb.com
TCB Scope: A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices

FCC ID
Grantee Code: VV7
Product Code: -MBMF5321

Person at the applicant's address to receive grant or for contact
Name: Bernie Fuller
Title: Certification Approval Manager
Telephone Number: +46 107124371 Extension:
Fax Number: +46 107126033
Email: bernie.fuller@ericsson.com

Technical Contact
Firm Name: AT4 wireless, S.A.
First Name: Ricardo
Last Name: Orejas
City: Málaga
Country:
Spain
E-Mail:

Non Technical Contact
Firm Name: AT4 wireless, S.A.
First Name: Ricardo
Last Name: Orejas
City: Málaga
Country: Spain
E-Mail: rorejas@at4wireless.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   03/31/2012
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   JBP - Part 15 Class B Computing Device Peripheral
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): F5321 Ericsson Mobile Broadband Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   AT4 wireless S.A.
First Name:   Juan Carlos
Last Name:   Soler Claros
Telephone Number: 34-9562-619100 Extension:
Fax Number:  34-9562-619113
E-mail:  jsoler@at4wireless.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
GSM/WCDMA Modular transmitter
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Ricardo Orejas
Title of authorized signature:  WCS Consultant

Complete items below if agent signs the application:

Firm Name:  AT4 wireless, S.A.
E-mail:  rorejas@at4wireless.com

Form App # 2 (2011-10-03)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ericsson AB
FCC Registration Number (FRN): 0017216037
Alphanumeric FCC ID: VV7MBMF5321
Unique Application Identifier: NY7lISBW8cPAjix+I2g9gA==
Line one: Mobile Broadband Modules
Line two: Lindholmspiren 11
City: Gothenburg
State: N/A
Country: Sweden
Zip Code: SE 417 56

TCB Information
TCB Application Email Address: hotline@atcb.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: VV7
Product Code: -MBMF5321

Person at the applicant's address to receive grant or for contact
Name: Bernie Fuller
Title: Certification Approval Manager
Telephone Number: +46 107124371 Extension:
Fax Number: +46 107126033
Email: bernie.fuller@ericsson.com

Technical Contact
Firm Name: AT4 wireless, S.A.
First Name: Ricardo
Last Name: Orejas
Country:
Spain
E-Mail:

Non Technical Contact
Firm Name: AT4 wireless, S.A.
First Name: Ricardo
Last Name: Orejas
Country: Spain
E-Mail: rorejas@at4wireless.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   03/31/2012
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): F5321 Ericsson Mobile Broadband Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   AT4 wireless S.A.
First Name:   Juan Carlos
Last Name:   Soler Claros
Telephone Number: 34-9562-619100 Extension:
Fax Number:  34-9562-619113
E-mail:  jsoler@at4wireless.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular Approval. Power out is conducted at the antenna terminal. This filling only covers the device to be used for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing, except in accordance with FCC multi-transmitter product procedures. This device has been approved for use in specific co-location configurations, as described in this filing. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. Antennas used for this module must not exceed 6.46 dBi gain in the 850 MHz band and 2.34 dBi in the 1900 MHz band, for mobile and fixed operating configurations. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM/WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz and 1900 MHz operations.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Ricardo Orejas
Title of authorized signature:  WCS Consultant

Complete items below if agent signs the application:

Firm Name:  AT4 wireless, S.A.
E-mail:  rorejas@at4wireless.com

Form App # 3 (2012-05-21)

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Ericsson AB
FCC Registration Number (FRN): 0017216037
Alphanumeric FCC ID: VV7MBMF5321
Unique Application Identifier: tsZblZrLDV5z1I5q0GVDYQ==
Line one: Mobile Broadband Modules
Line two: Lindholmspiren 11
City: Gothenburg
State: N/A
Country: Sweden
Zip Code: SE 417 56

TCB Information
TCB Application Email Address: hotline@acbcert.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: VV7
Product Code: -MBMF5321

Person at the applicant's address to receive grant or for contact
Name: Bernie Fuller
Title: Certification Approval Manager
Telephone Number: +46 107124371 Extension:
Fax Number: +46 107126033
Email: bernie.fuller@ericsson.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): F5321 Ericsson Mobile Broadband Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   SGS TAIWAN LTD.
First Name:   NELSON
Last Name:   BAI
Telephone Number: 886-2-22993279 Extension: 1458
Fax Number:  886-2-22999489
E-mail:  nelson.Bai@sgs.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular Approval. Power out is conducted at the antenna terminal. This filling only covers the device to be used for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing, except in accordance with FCC multi-transmitter product procedures. This device has been approved for use in specific co-location configurations, as described in this filing. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. Antennas used for this module must not exceed 6.46 dBi gain in the 850 MHz band and 2.34 dBi in the 1900 MHz band, for mobile and fixed operating configurations. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM/WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz and 1900 MHz operations. Class 2 Permissive Change to allow portable use inside laptop model HSTNN-W90C, as described in this filing. Highest reported SAR value is 0.039 W/kg. The permitted antennas and co-located transmitters are described in this filing.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Bernie Fuller
Title of authorized signature:  Approval Manager

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

© FCCID.io 2025