FCC ID VV7-MBMF5521GW1

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class 2 Permissive Change performed to allow Portable configuration in host device Lenovo model TP00019A, as described in this filing. Highest reported SAR levels are: GSM 850 MHz 0.943 W/kg; GSM 1900 MHz 1.070 W/kg; WCDMA 850 MHz 0.697 W/kg; WCDMA 1900 MHz 1.180 W/kg.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class 2 Permissive Change performed to allow Portable configuration in host device Lenovo model TP00019A, as described in this filing. Highest reported SAR levels are: GSM 850 MHz 0.943 W/kg; GSM 1900 MHz 1.070 W/kg; WCDMA 850 MHz 0.697 W/kg; WCDMA 1900 MHz 1.180 W/kg.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi for multislot class 12 with power reduction and 5.94 dBi for multislot class 10 without power reduction in standalone use or 3.55 dBi for multislot class 10 without power reduction in co-located use in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class 2 Permissive Change performed to allow Portable configuration in host device model P17G-P17G001, as described in this filing. The highest reported SAR level is: 1.32 W/kg. GPRS Class 10.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi for multislot class 12 with power reduction and 5.94 dBi for multislot class 10 without power reduction in standalone use or 3.55 dBi for multislot class 10 without power reduction in co-located use in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class 2 Permissive Change performed to allow Portable configuration in host device model P17G-P17G001, as described in this filing. The highest reported SAR level is: 1.32 W/kg. GPRS Class 10.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class II Permissive Change performed to allow Portable configuration in host device Grid 10 Smart Mobile PC as described in this filing. Highest reported SAR levels are: GSM 850 MHz 1.08W/kg; GSM 1900 MHz 0.69 W/kg; WCDMA 850 MHz 1.33 W/kg; WCDMA 1900 MHz 1.32W/kg.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class II Permissive Change performed to allow Portable configuration in host device Grid 10 Smart Mobile PC as described in this filing. Highest reported SAR levels are: GSM 850 MHz 1.08W/kg; GSM 1900 MHz 0.69 W/kg; WCDMA 850 MHz 1.33 W/kg; WCDMA 1900 MHz 1.32W/kg.

Class II permissive change: Limited modular approval. This filing adds a portable host configuration model number DELL Model T02G, as described in this filling.The antennas used for this transmitter must not exceed a gain of -.16dBi for Part 22H and 2.98dBi for Part 24E. This device must use a BIOS lock mechanism which ensures that it only operates with the hosts as specified in the Certification filing. This device was SAR evaluated for simultaneous operations with already approved module FCCID: PPD-ARS263. The highest reported SAR value is 1.28W/kg.

Class II permissive change: Limited modular approval. This filing adds a portable host configuration model number DELL Model T02G, as described in this filling.The antennas used for this transmitter must not exceed a gain of -.16dBi for Part 22H and 2.98dBi for Part 24E. This device must use a BIOS lock mechanism which ensures that it only operates with the hosts as specified in the Certification filing. This device was SAR evaluated for simultaneous operations with already approved module FCCID: PPD-ARS263. The highest reported SAR value is 1.28W/kg.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class II Permissive Change performed to allow Portable configuration in host device Panasonic model CF-D1, as described in this filing. The highest reported body SAR values under this filing are: Part 22: 0.226 W/kg; Part 24: 0.344 W/kg. Highest reported SAR values under this FCCID are: GSM 850 MHz 0.943 W/kg; GSM 1900 MHz 1.070 W/kg; WCDMA 850 MHz 0.697 W/kg; WCDMA 1900 MHz 1.180 W/kg.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class II Permissive Change performed to allow Portable configuration in host device Panasonic model CF-D1, as described in this filing. The highest reported body SAR values under this filing are: Part 22: 0.226 W/kg; Part 24: 0.344 W/kg. Highest reported SAR values under this FCCID are: GSM 850 MHz 0.943 W/kg; GSM 1900 MHz 1.070 W/kg; WCDMA 850 MHz 0.697 W/kg; WCDMA 1900 MHz 1.180 W/kg.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi for multislot class 12 with power reduction and 5.94 dBi for multislot class 10 without power reduction in stand-alone use or 3.55 dBi for multislot class 10 without power reduction in co-located use in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class 2 Permissive Change performed to allow Portable configuration in host device HP Compaq model TPN-Q101, as described in this filing. Highest reported SAR levels are: GSM 850 MHz 0.108 W/kg; GSM 1900 MHz 0.016 W/kg; WCDMA 850 MHz 0.055 W/kg; WCDMA 1900 MHz 0.014 W/kg. GPRS Class 10.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi for multislot class 12 with power reduction and 5.94 dBi for multislot class 10 without power reduction in stand-alone use or 3.55 dBi for multislot class 10 without power reduction in co-located use in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class 2 Permissive Change performed to allow Portable configuration in host device HP Compaq model TPN-Q101, as described in this filing. Highest reported SAR levels are: GSM 850 MHz 0.108 W/kg; GSM 1900 MHz 0.016 W/kg; WCDMA 850 MHz 0.055 W/kg; WCDMA 1900 MHz 0.014 W/kg. GPRS Class 10.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi for multislot class 12 with power reduction and 5.94 dBi for multislot class 10 without power reduction in standalone use or 3.55 dBi for multislot class 10 without power reduction in co-located use in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class 2 Permissive Change performed to allow generic Portable configuration in any host device, based on a generic SAR assessment. The device has SAR levels of less than 0.4 W/kg at a distance of 40mm. For generic portable configurations, the module must be installed as shown in this filing, only with the antennas tested and detailed in this filing, with a minimum user separation distance of 40mm. The installer must be provided with clear installation instructions to meet RF Exposure requirements. The highest reported SAR level at 40mm was 0.122 W/kg.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi for multislot class 12 with power reduction and 5.94 dBi for multislot class 10 without power reduction in standalone use or 3.55 dBi for multislot class 10 without power reduction in co-located use in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class 2 Permissive Change performed to allow generic Portable configuration in any host device, based on a generic SAR assessment. The device has SAR levels of less than 0.4 W/kg at a distance of 40mm. For generic portable configurations, the module must be installed as shown in this filing, only with the antennas tested and detailed in this filing, with a minimum user separation distance of 40mm. The installer must be provided with clear installation instructions to meet RF Exposure requirements. The highest reported SAR level at 40mm was 0.122 W/kg.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class 2 Permissive Change performed to allow Portable configuration in host device HP Compaq model HSTNN-F05C, as described in this filing. Highest reported SAR levels are: GSM 850 MHz 0.091 W/kg; GSM 1900 MHz 0.021 W/kg; WCDMA 850 MHz 0.050 W/kg; WCDMA 1900 MHz 0.040 W/kg. GPRS Class 10.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class 2 Permissive Change performed to allow Portable configuration in host device HP Compaq model HSTNN-F05C, as described in this filing. Highest reported SAR levels are: GSM 850 MHz 0.091 W/kg; GSM 1900 MHz 0.021 W/kg; WCDMA 850 MHz 0.050 W/kg; WCDMA 1900 MHz 0.040 W/kg. GPRS Class 10.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi for multislot class 12 with power reduction and 5.94 dBi for multislot class 10 without power reduction in stand-alone use or 3.55 dBi for multislot class 10 without power reduction in co-located use in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class 2 Permissive Change performed to allow Portable configuration in host device HP Compaq model HSTNN-W82C, as described in this filing. Highest reported SAR levels are: GSM 850 MHz 0.942 W/kg; GSM 1900 MHz 0.338 W/kg; WCDMA 850 MHz 0.449 W/kg; WCDMA 1900 MHz 0.290 W/kg. GPRS Class 10.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi for multislot class 12 with power reduction and 5.94 dBi for multislot class 10 without power reduction in stand-alone use or 3.55 dBi for multislot class 10 without power reduction in co-located use in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class 2 Permissive Change performed to allow Portable configuration in host device HP Compaq model HSTNN-W82C, as described in this filing. Highest reported SAR levels are: GSM 850 MHz 0.942 W/kg; GSM 1900 MHz 0.338 W/kg; WCDMA 850 MHz 0.449 W/kg; WCDMA 1900 MHz 0.290 W/kg. GPRS Class 10.

Output power listed is conducted.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi for multislot class 12 with power reduction and 5.94 dBi for multislot class 10 without power reduction in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Output power listed is conducted.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi for multislot class 12 with power reduction and 5.94 dBi for multislot class 10 without power reduction in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class 2 Permissive Change performed to allow Portable configuration in host device PAV70 & PAV80 as described in this filing. Highest reported SAR levels are: GSM 850 MHz 0.07W/kg; GSM 1900 MHz 0.03 W/kg; WCDMA 850 MHz 0.07 W/kg; WCDMA 1900 MHz 0.04 W/kg.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class 2 Permissive Change performed to allow Portable configuration in host device PAV70 & PAV80 as described in this filing. Highest reported SAR levels are: GSM 850 MHz 0.07W/kg; GSM 1900 MHz 0.03 W/kg; WCDMA 850 MHz 0.07 W/kg; WCDMA 1900 MHz 0.04 W/kg.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class 2 Permissive Change performed to allow Portable configuration in host device Dell Latitude 2120-P02T-P02T001, as described in this filing. Highest reported SAR levels are: GSM 850 MHz 0.039 W/kg; GSM 1900 MHz 0.025 W/kg; WCDMA 850 MHz 0.042 W/kg; WCDMA 1900 MHz 0.050 W/kg.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.1 dBi in the 850 MHz Cellular band and 2.5 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

This device is approved for use in specific co-located configurations in generic host platforms as described in this filing.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Class 2 Permissive Change performed to allow Portable configuration in host device Dell Latitude 2120-P02T-P02T001, as described in this filing. Highest reported SAR levels are: GSM 850 MHz 0.039 W/kg; GSM 1900 MHz 0.025 W/kg; WCDMA 850 MHz 0.042 W/kg; WCDMA 1900 MHz 0.050 W/kg.