1. FCC ID
  2. VYT
  3. VYTLP-9181A

FCC ID VYTLP-9181A

802.11b/g/n INDOOR SIGNAL BOOSTER 1000MW

by Loopcomm Technology,.Inc.

Grantee Code: VYT   Product Code: LP9181A
Latest application date: 2010-12-03

FCC ID Device Details

FCC IDVYTLP-9181A
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeVYT
Product CodeLP9181A
Applicant BusinessLoopcomm Technology,.Inc. 🇹🇼
Related Domains loopcomm.com
Equipment Class802.11b/g/n INDOOR SIGNAL BOOSTER 1000MW
Test FirmSpectrum Research & Testing Laboratory, Inc

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2010-12-03
2412-2462 MHzOriginal Equipment2010-09-07

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2010-12-03PDF 423.8 KB
users manualUsers Manual2010-09-07PDF 401.6 KB
Internal PhotosInternal Photos2010-12-03PDF 341.7 KB
internal photosInternal Photos2010-09-07PDF 341.5 KB
External PhotosExternal Photos2010-12-03PDF 411 KB
external photosExternal Photos2010-09-07PDF 410.8 KB
LabelID Label/Location Info2010-12-03PDF 79.8 KB
label sample and locationID Label/Location Info2010-09-07PDF 81.5 KB
Block DiagramBlock Diagram2010-12-03PDF 22.1 KB
block diagramBlock Diagram2010-09-07PDF 22.1 KB
SchematicsSchematics2010-12-03PDF 59.5 KB
schematicsSchematics2010-09-07PDF 59.5 KB
Operational DescriptionOperational Description2010-12-03PDF 12.6 KB
Technological SpecOperational Description2010-12-03PDF 25.6 KB
operational descriptionOperational Description2010-09-07PDF 13.6 KB
technological specOperational Description2010-09-07PDF 25.6 KB
Test Setup PhotosTest Setup Photos2010-12-03PDF 211.7 KB
test setup photosTest Setup Photos2010-09-07PDF 215 KB
Test ReportTest Report2010-12-03PDF 3.8 MB
test reportTest Report2010-09-07PDF 3.7 MB
Cover LetterCover Letter(s)2010-12-03PDF 14.5 KB
POACover Letter(s)2010-12-03PDF 157.7 KB
poaCover Letter(s)2010-09-07PDF 157.7 KB
rf exposure complianceRF Exposure Info2010-09-07PDF 19.2 KB

Application Information

Application IDv8qrWA209eKbvr1F/NeTOw==
Final Action Date2010-12-03
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0023521610
ModelLP-9181A
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11b/g/n INDOOR SIGNAL BOOSTER 1000MW
Responsible PartyJane Lee, vice president, Jane@loopcomm.com , +886-2-8686-9685
Test FirmJohnson Ho, Spectrum Research & Testing Laboratory, Inc, johnson@srtlab.com , 886-3-4987684
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452MHz. Class II Change: This Class II Change adds a new companion unit to this Booster. The new unit is FCC ID: VYTLP-8616C and will be sold as a system with this device.

Applications

Application IDDatePurpose
v8qrWA209eKbvr1F/NeTOw==2010-12-03Class II permissive change or modification of presently authorized equipment
Z4BruTdKmycsLL9t/eCL/w==2010-09-07Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.40315C
2422-2452 MHz0.2615C

Grants

TCB Grant - Application Z4BruTdKmycsLL9t/eCL/w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
 Date of Grant: 09/07/2010

Application Dated: 09/07/2010
Loopcomm Technology,.Inc.
6F., No.236, Bo'ai St., Shulin Dist.,
New Taipei City, 23845
Taiwan
 
Attention: Jane Lee , vice president

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VYTLP-9181A
Name of Grantee:  Loopcomm Technology,.Inc.
Equipment Class: Digital Transmission System
Notes: 802.11b/g/n Indoor Signal Booster 1000mW
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.403  
15C 2422.0  -  2452.0 0.26  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance

When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452MHz.


EAS Grant - Application Z4BruTdKmycsLL9t/eCL/w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Loopcomm Technology,.Inc.
6F., No.236, Bo'ai St., Shulin Dist.,
New Taipei City, 23845
Taiwan 		  Date of Grant: 09/07/2010

Application Dated: 09/07/2010
 
Attention: Jane Lee , vice president

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VYTLP-9181A
Name of Grantee:  Loopcomm Technology,.Inc.
Equipment Class: Digital Transmission System
Notes: 802.11b/g/n Indoor Signal Booster 1000mW
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.403  
15C 2422.0  -  2452.0 0.26  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance

When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452MHz.



TCB Grant - Application v8qrWA209eKbvr1F/NeTOw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
 Date of Grant: 12/03/2010

Application Dated: 12/03/2010
Loopcomm Technology,.Inc.
6F., No.236, Bo'ai St., Shulin Dist.,
New Taipei City, 23845
Taiwan
 
Attention: Jane Lee , vice president

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VYTLP-9181A
Name of Grantee:  Loopcomm Technology,.Inc.
Equipment Class: Digital Transmission System
Notes: 802.11b/g/n INDOOR SIGNAL BOOSTER 1000MW
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.403  
15C 2422.0  -  2452.0 0.26  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452MHz.

Class II Change: This Class II Change adds a new companion unit to this Booster. The new unit is FCC ID: VYTLP-8616C and will be sold as a system with this device.


EAS Grant - Application v8qrWA209eKbvr1F/NeTOw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Loopcomm Technology,.Inc.
6F., No.236, Bo'ai St., Shulin Dist.,
New Taipei City, 23845
Taiwan 		  Date of Grant: 12/03/2010

Application Dated: 12/03/2010
 
Attention: Jane Lee , vice president

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VYTLP-9181A
Name of Grantee:  Loopcomm Technology,.Inc.
Equipment Class: Digital Transmission System
Notes: 802.11b/g/n INDOOR SIGNAL BOOSTER 1000MW
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.403  
15C 2422.0  -  2452.0 0.26  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452MHz.

Class II Change: This Class II Change adds a new companion unit to this Booster. The new unit is FCC ID: VYTLP-8616C and will be sold as a system with this device.



Mail To: