FCC ID VYV-SW6621-44B1

SW6621-44B1

by Iton Technology Corp.

Grantee Code: VYV   Product Code: SW662144B1
Latest application date: 2024-04-16

FCC ID Device Details

FCC IDVYV-SW6621-44B1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeVYV
Product CodeSW662144B1
Applicant BusinessIton Technology Corp. 🇨🇳
Related Domains sziton.com
Equipment ClassSW6621-44B1
Test FirmShenzhen Anbotek Compliance Laboratory Limited

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzOriginal Equipment2024-04-16
2402-2480 MHzOriginal Equipment2024-04-16
2402-2480 MHzOriginal Equipment2024-04-16

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2024-04-16PDF 974.1 KB
user manualUsers Manual2024-04-16PDF 974.1 KB
Internal photoInternal Photos2024-04-16PDF 445.7 KB
External photoExternal Photos2024-04-16PDF 647.4 KB
labelID Label/Location Info2024-04-16PDF 49.8 KB
Test photoTest Setup Photos2024-04-16PDF 678.5 KB
Test setupTest Setup Photos2024-04-16PDF 678.5 KB
test photoTest Setup Photos2024-04-16PDF 678.5 KB
2.4G WLAN Appendix Test DataTest Report2024-04-16PDF 5.6 MB
2.4G wifi reportTest Report2024-04-16PDF 2.6 MB
Antenna SpecificationTest Report2024-04-16PDF 928.5 KB
Antenna specificationTest Report2024-04-16PDF 928.5 KB
BLE reportTest Report2024-04-16PDF 3.2 MB
BLE report appendix dataTest Report2024-04-16PDF 2 MB
BT Appendix Test DataTest Report2024-04-16PDF 3.6 MB
BT test reportTest Report2024-04-16PDF 3.3 MB
RLAN Appendix Data 1Test Report2024-04-16PDF 4.7 MB
RLAN Appendix Data 2Test Report2024-04-16PDF 4.8 MB
RLAN Appendix Data 3Test Report2024-04-16PDF 4.7 MB
RLAN Appendix Data 4Test Report2024-04-16PDF 4.3 MB
test reportTest Report2024-04-16PDF 3 MB
2.911d 5 i Certification Equipment TypeAttestation Statements2024-04-16PDF 93.4 KB
2.911d 5 ii Certificiation ApplicantAttestation Statements2024-04-16PDF 88.5 KB
US Agent for Service ProcessAttestation Statements2024-04-16PDF 392.5 KB
FCC Modular Approval RequestCover Letter(s)2024-04-16PDF 77.6 KB
FCC Short Long Term Confidentiality RequestCover Letter(s)2024-04-16PDF 61.3 KB
FCC Software Configuration Control DeclarationCover Letter(s)2024-04-16PDF 89.4 KB
Letter of AuthorizationCover Letter(s)2024-04-16PDF 61.5 KB
Model DifferenceCover Letter(s)2024-04-16PDF 60.6 KB
Model Difference DeclarationCover Letter(s)2024-04-16PDF 60.6 KB
Model DifferencesCover Letter(s)2024-04-16PDF 60.6 KB
MPE reportRF Exposure Info2024-04-16PDF 328.1 KB
Block Metadata onlyBlock DiagramPDF 54.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 54.1 KB
Schematic Metadata onlySchematicsPDF 123.5 KB
Schematics Metadata onlySchematicsPDF 123.5 KB
OP Metadata onlyOperational DescriptionPDF 130.5 KB
Operation Description Metadata onlyOperational DescriptionPDF 130.5 KB
SOFTWARE SECURITY REQUIREMENT SFORU-NIIDEVICES Metadata onlySDR Software/Security Info.PDF 140.7 KB

Application Information

Application IDm8Y/QqRJDG7FufG4n8eYhw==
Final Action Date2024-04-16
Application PurposeOriginal Equipment
Applicant FRN0025963323
ModelSW6621-44B1
Frequency Range5745-5825 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionSW6621-44B1
Responsible Partyzhanchi Zha, Product Manager, fly.zha@sziton.com , 15768474829
Technical ContactIton Technology Corp., fly.zha@sziton.com
Test FirmJeff Zhu, Shenzhen Anbotek Compliance Laboratory Limited, jeff.zhu@anbotek.com , 13798230942
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

Applications

Application IDDatePurpose
m8Y/QqRJDG7FufG4n8eYhw==2024-04-16Original Equipment
7ztLjTT5od8kOexrxHErqw==2024-04-16Original Equipment
/13ruJsb7/ZAkY1WoPOFMg==2024-04-16Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002400015CCC
2402-2480 MHz0.00715CCC
2412-2462 MHz0.238815CCC
5180-5240 MHz0.098215ECC
5260-5320 MHz0.090415ECC, ND
5500-5700 MHz0.10515ECC, ND
5745-5825 MHz0.087315ECC

Grants

TCB Grant - Application m8Y/QqRJDG7FufG4n8eYhw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 04/16/2024

Application Dated: 04/16/2024
Iton Technology Corp.
7 Floor East, Building C, Shenzhen International
Innovation Center, No.1006 Shennan Rd. Futian Dist
Shenzhen,
China
 
Attention: zhanchi Zha , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VYV-SW6621-44B1
Name of Grantee:  Iton Technology Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: SW6621-44B1
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0982  
CC ND 15E 5260.0  -  5320.0 0.0904  
CC ND 15E 5500.0  -  5700.0 0.105  
CC 15E 5745.0  -  5825.0 0.0873  

Single Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application m8Y/QqRJDG7FufG4n8eYhw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Iton Technology Corp.
7 Floor East, Building C, Shenzhen International Innovation Center, No.1006 Shennan Rd. Futian Dist
Shenzhen,
China
  Date of Grant: 04/16/2024

Application Dated: 04/16/2024
 
Attention: zhanchi Zha , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VYV-SW6621-44B1
Name of Grantee:  Iton Technology Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: SW6621-44B1
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0982  
CC ND 15E 5260.0  -  5320.0 0.0904  
CC ND 15E 5500.0  -  5700.0 0.105  
CC 15E 5745.0  -  5825.0 0.0873  

Single Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 7ztLjTT5od8kOexrxHErqw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 04/16/2024

Application Dated: 04/16/2024
Iton Technology Corp.
7 Floor East, Building C, Shenzhen International
Innovation Center, No.1006 Shennan Rd. Futian Dist
Shenzhen,
China
 
Attention: zhanchi Zha , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VYV-SW6621-44B1
Name of Grantee:  Iton Technology Corp.
Equipment Class: Digital Transmission System
Notes: SW6621-44B1
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.2388  
CC 15C 2402.0  -  2480.0 0.007  

Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 7ztLjTT5od8kOexrxHErqw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Iton Technology Corp.
7 Floor East, Building C, Shenzhen International Innovation Center, No.1006 Shennan Rd. Futian Dist
Shenzhen,
China
  Date of Grant: 04/16/2024

Application Dated: 04/16/2024
 
Attention: zhanchi Zha , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VYV-SW6621-44B1
Name of Grantee:  Iton Technology Corp.
Equipment Class: Digital Transmission System
Notes: SW6621-44B1
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.2388  
CC 15C 2402.0  -  2480.0 0.007  

Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application /13ruJsb7/ZAkY1WoPOFMg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 04/16/2024

Application Dated: 04/16/2024
Iton Technology Corp.
7 Floor East, Building C, Shenzhen International
Innovation Center, No.1006 Shennan Rd. Futian Dist
Shenzhen,
China
 
Attention: zhanchi Zha , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VYV-SW6621-44B1
Name of Grantee:  Iton Technology Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: SW6621-44B1
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0024  

Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application /13ruJsb7/ZAkY1WoPOFMg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Iton Technology Corp.
7 Floor East, Building C, Shenzhen International Innovation Center, No.1006 Shennan Rd. Futian Dist
Shenzhen,
China
  Date of Grant: 04/16/2024

Application Dated: 04/16/2024
 
Attention: zhanchi Zha , Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VYV-SW6621-44B1
Name of Grantee:  Iton Technology Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: SW6621-44B1
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0024  

Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: