1. FCC ID
  2. VZ9
  3. VZ9130003

FCC ID VZ9130003

Enterprise Access Point

by 4IPNET, INC.

Grantee Code: VZ9   Product Code: 130003
Latest application date: 2013-12-29

FCC ID Device Details

FCC IDVZ9130003
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeVZ9
Product Code130003
Applicant Business4IPNET, INC. 🇹🇼
Related Domains 4ipnet.com
Equipment ClassEnterprise Access Point
Test FirmCompliance Certification Services Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2013-12-29
2412-2462 MHzOriginal Equipment2013-12-29

Exhibits

DocumentTypeAvailableFile
Installation guideUsers Manual2014-06-28PDF 907.2 KB
Internal PhotosInternal Photos2013-12-29PDF 901.7 KB
External photoExternal Photos2013-12-29PDF 369.3 KB
LabelID Label/Location Info2013-12-29PDF 1.3 MB
Label LocationID Label/Location Info2013-12-29PDF 41.3 KB
Test Setup PhotoTest Setup Photos2013-12-29PDF 473.3 KB
Test Report DTSTest Report2013-12-29PDF 2 MB
Test Report NIITest Report2013-12-29PDF 1.2 MB
DoC Attestation LetterAttestation Statements2013-12-29PDF 289.7 KB
Confidentiality Request LetterCover Letter(s)2013-12-29PDF 765.1 KB
POACover Letter(s)2013-12-29PDF 342.5 KB
MPERF Exposure Info2013-12-29PDF 251.4 KB

Application Information

Application IDc9sKqQA+INRdADJ67PTiaw==
Final Action Date2013-12-29
Application PurposeOriginal Equipment
Applicant FRN0020772463
Model130003
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionEnterprise Access Point
Responsible PartyLillian Lu, Executive Director, lillian.lu@4ipnet.com , +886-2-27187000
Test FirmKurt Chen, Compliance Certification Services Inc., kurt.chen@ccsrf.com , 886-3-3240332
TCB Emailtcb@siemic.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date06/28/2014
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is the combined conducted output power. Device contains 20 and 40 MHz signal bandwidth. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
c9sKqQA+INRdADJ67PTiaw==2013-12-29Original Equipment
53dA8Kezkj8b82s6Tr+LFA==2013-12-29Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.10415CCC, MO
2412-2462 MHz0.376715CCC, MO
2412-2462 MHz0.604815CCC, MO
2422-2452 MHz0.2315CCC, MO
5180-5240 MHz0.003415ECC, MO
5180-5240 MHz0.00915ECC, MO
5190-5230 MHz0.018215ECC, MO
5745-5825 MHz0.11815CCC, MO
5745-5825 MHz0.148615CCC, MO
5755-5795 MHz0.144115CCC, MO

Grants

TCB Grant - Application c9sKqQA+INRdADJ67PTiaw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 12/29/2013

Application Dated: 12/29/2013
4IPNET, INC.
5F, No. 367, Fusing N. Rd., Songshan Dist.,
Taipei 105, Taiwan(R.O.C.)
Taipei 105,, 105
Taiwan
 
Attention: Lillian Lu , Executive Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VZ9130003
Name of Grantee:  4IPNET, INC.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Enterprise Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0034  
CC MO 15E 5180.0  -  5240.0 0.009  
CC MO 15E 5190.0  -  5230.0 0.0182  

Power listed is the combined conducted output power. Device contains 20 and 40 MHz signal bandwidth. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application c9sKqQA+INRdADJ67PTiaw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

4IPNET, INC.
5F, No. 367, Fusing N. Rd., Songshan Dist., Taipei 105, Taiwan(R.O.C.)
Taipei 105,, 105
Taiwan 		  Date of Grant: 12/29/2013

Application Dated: 12/29/2013
 
Attention: Lillian Lu , Executive Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VZ9130003
Name of Grantee:  4IPNET, INC.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Enterprise Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0034  
CC MO 15E 5180.0  -  5240.0 0.009  
CC MO 15E 5190.0  -  5230.0 0.0182  

Power listed is the combined conducted output power. Device contains 20 and 40 MHz signal bandwidth. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 53dA8Kezkj8b82s6Tr+LFA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 12/29/2013

Application Dated: 12/29/2013
4IPNET, INC.
5F, No. 367, Fusing N. Rd., Songshan Dist.,
Taipei 105, Taiwan(R.O.C.)
Taipei 105,, 105
Taiwan
 
Attention: Lillian Lu , Executive Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VZ9130003
Name of Grantee:  4IPNET, INC.
Equipment Class: Digital Transmission System
Notes: Enterprise Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 5745.0  -  5825.0 0.118  
CC MO 15C 5745.0  -  5825.0 0.1486  
CC MO 15C 5755.0  -  5795.0 0.1441  
CC MO 15C 2412.0  -  2462.0 0.104  
CC MO 15C 2412.0  -  2462.0 0.3767  
CC MO 15C 2412.0  -  2462.0 0.6048  
CC MO 15C 2422.0  -  2452.0 0.23  

Power listed is the combined conducted output power. Device contains 20 and 40 MHz signal bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 53dA8Kezkj8b82s6Tr+LFA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

4IPNET, INC.
5F, No. 367, Fusing N. Rd., Songshan Dist., Taipei 105, Taiwan(R.O.C.)
Taipei 105,, 105
Taiwan 		  Date of Grant: 12/29/2013

Application Dated: 12/29/2013
 
Attention: Lillian Lu , Executive Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  VZ9130003
Name of Grantee:  4IPNET, INC.
Equipment Class: Digital Transmission System
Notes: Enterprise Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 5745.0  -  5825.0 0.118  
CC MO 15C 5745.0  -  5825.0 0.1486  
CC MO 15C 5755.0  -  5795.0 0.1441  
CC MO 15C 2412.0  -  2462.0 0.104  
CC MO 15C 2412.0  -  2462.0 0.3767  
CC MO 15C 2412.0  -  2462.0 0.6048  
CC MO 15C 2422.0  -  2452.0 0.23  

Power listed is the combined conducted output power. Device contains 20 and 40 MHz signal bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: