FCC ID W23-JWX6082

802.11a/b/g/n 3T3R Mini-PCI Express Module

by JJPlus Corporation

Grantee Code: W23   Product Code: JWX6082
Latest application date: 2017-06-12

FCC ID Device Details

FCC IDW23-JWX6082
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeW23
Product CodeJWX6082
Applicant BusinessJJPlus Corporation 🇹🇼
Related Domains jjplus.com
Equipment Class802.11a/b/g/n 3T3R Mini-PCI Express Module
Test FirmBureau Veritas CPS(H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-06-12
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2017-06-12
5180-5240 MHzOriginal Equipment2014-09-05
2412-2462 MHzOriginal Equipment2014-09-05

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2015-03-04PDF 36.3 KB
Internal PhotosInternal Photos2015-03-04PDF 298.4 KB
External PhotosExternal Photos2015-03-04PDF 369.7 KB
Label & Label LocationID Label/Location Info2017-06-12PDF 411.1 KB
Label & Location InfoID Label/Location Info2014-09-05PDF 73.7 KB
RF Test Set-up PhotosTest Setup Photos2017-06-12PDF 227.7 KB
RF Test Set-up photosTest Setup Photos2017-06-12PDF 227.7 KB
Test Setup PhotosTest Setup Photos2015-03-04PDF 209.1 KB
RF Test ReportTest Report2017-06-12PDF 1.4 MB
RF Test ReportTest Report2017-06-12PDF 1.2 MB
RF Report (DTS)Test Report2014-09-05PDF 2 MB
RF Report (NII)Test Report2014-09-05PDF 1.1 MB
Authorization letterCover Letter(s)2017-06-12PDF 96.7 KB
Class II change LetterCover Letter(s)2017-06-12PDF 17.6 KB
LTC LetterCover Letter(s)2017-06-12PDF 32.5 KB
POACover Letter(s)2017-06-12PDF 26.6 KB
Confidentiality Request LetterCover Letter(s)2014-09-05PDF 120.6 KB
DOC LetterCover Letter(s)2014-09-05PDF 63.9 KB
Declaration Letter for Ad-Hoc and WLAN channelsCover Letter(s)2014-09-05PDF 64.3 KB
Module Approval RequestCover Letter(s)2014-09-05PDF 24.7 KB
POACover Letter(s)2014-09-05PDF 103.2 KB
MPE ReportRF Exposure Info2014-09-05PDF 463.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 15.4 KB
Schematics Metadata onlySchematicsPDF 57.6 KB
Operational Description Metadata onlyOperational DescriptionPDF 37.5 KB
SW Declaration Letter Metadata onlyOperational DescriptionPDF 46.8 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 32.6 KB

Application Information

Application IDtotx+4xBCW6nAylMd2NnSw==
Final Action Date2017-06-12
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0018420901
ModelJWX6082
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11a/b/g/n 3T3R Mini-PCI Express Module
Responsible PartyJeff Shu, jshu@jjplus.com , +886-2-2248-5700
Test FirmEric Lin, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch, eric-wp.lin@tw.bureauveritas.com , +886-3-2641570
TCB Emailtcb@siemic.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsCIIPC to add model number and to update test standard version. Single modular approval for Mobile host platform. Power output listed is combined conducted RF power. Device contains 20/ 40 MHz signal bandwidth. Device is Spatial Multiplexing 3x3 MIMO configurations as described in this filing. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and operation conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain (2dBi) may be used with this transmitter.

Applications

Application IDDatePurpose
totx+4xBCW6nAylMd2NnSw==2017-06-12Class II permissive change or modification of presently authorized equipment
NbiTd/q2zCPjPnk/bkch0A==2017-06-12Class II permissive change or modification of presently authorized equipment
QAAxV/95IqPF8JKFB1nu6w==2014-09-05Original Equipment
DSeoWocSCj4XHF+XNi/E8w==2014-09-05Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.22715CCC, MO
2412-2462 MHz0.163000015CCC, MO
5180-5240 MHz0.039000015ECC, MO
5180-5240 MHz0.03415E38, CC, MO
5745-5805 MHz0.29615CCC, MO
5745-5805 MHz0.08215E38, CC, MO

Grants

TCB Grant - Application totx+4xBCW6nAylMd2NnSw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 06/12/2017

Application Dated: 06/12/2017
JJPlus Corporation
15F-7, No. 2, Jianba Road, Zhonghe Dist.,
New Taipei City,
Taiwan
 
Attention: Jeff Shu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W23-JWX6082
Name of Grantee:  JJPlus Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n 3T3R Mini-PCI Express Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.034  
38 CC MO 15E 5745.0  -  5805.0 0.082  

CIIPC to add model number and to update test standard version.

Single modular approval for Mobile host platform. Power output listed is combined conducted RF power. Device contains 20/ 40 MHz signal bandwidth. Device is Spatial Multiplexing 3x3 MIMO configurations as described in this filing. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and operation conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain (2dBi) may be used with this transmitter.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application totx+4xBCW6nAylMd2NnSw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

JJPlus Corporation
15F-7, No. 2, Jianba Road, Zhonghe Dist.,
New Taipei City,
Taiwan
  Date of Grant: 06/12/2017

Application Dated: 06/12/2017
 
Attention: Jeff Shu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W23-JWX6082
Name of Grantee:  JJPlus Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n 3T3R Mini-PCI Express Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.034  
38 CC MO 15E 5745.0  -  5805.0 0.082  

CIIPC to add model number and to update test standard version.

Single modular approval for Mobile host platform. Power output listed is combined conducted RF power. Device contains 20/ 40 MHz signal bandwidth. Device is Spatial Multiplexing 3x3 MIMO configurations as described in this filing. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and operation conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain (2dBi) may be used with this transmitter.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application QAAxV/95IqPF8JKFB1nu6w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 09/05/2014

Application Dated: 09/05/2014
JJPlus Corporation
15F-7, No. 2, Jianba Road, Zhonghe Dist.,
New Taipei City,
Taiwan
 
Attention: Jeff Shu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W23-JWX6082
Name of Grantee:  JJPlus Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n 3T3R Mini-PCI Express Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.039  

Single modular approval for Mobile host platform. Power output listed is combined conducted RF power. Device contains 20/ 40 MHz signal bandwidth. Device is Spatial Multiplexing 3x3 MIMO configurations as described in this filing. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and operation conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain (2dBi) may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application QAAxV/95IqPF8JKFB1nu6w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

JJPlus Corporation
15F-7, No. 2, Jianba Road, Zhonghe Dist.,
New Taipei City,
Taiwan
  Date of Grant: 09/05/2014

Application Dated: 09/05/2014
 
Attention: Jeff Shu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W23-JWX6082
Name of Grantee:  JJPlus Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n 3T3R Mini-PCI Express Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.039  

Single modular approval for Mobile host platform. Power output listed is combined conducted RF power. Device contains 20/ 40 MHz signal bandwidth. Device is Spatial Multiplexing 3x3 MIMO configurations as described in this filing. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and operation conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain (2dBi) may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application NbiTd/q2zCPjPnk/bkch0A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 06/12/2017

Application Dated: 06/12/2017
JJPlus Corporation
15F-7, No. 2, Jianba Road, Zhonghe Dist.,
New Taipei City,
Taiwan
 
Attention: Jeff Shu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W23-JWX6082
Name of Grantee:  JJPlus Corporation
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n 3T3R Mini-PCI Express Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.163  

CIIPC to add model number and to update test standard version.

Single modular approval for Mobile host platform. Power output listed is combined conducted RF power. Device contains 20 and 40 MHz signal bandwidth. Device is Spatial Multiplexing 3x3 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and operation conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain (2dBi) may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application NbiTd/q2zCPjPnk/bkch0A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

JJPlus Corporation
15F-7, No. 2, Jianba Road, Zhonghe Dist.,
New Taipei City,
Taiwan
  Date of Grant: 06/12/2017

Application Dated: 06/12/2017
 
Attention: Jeff Shu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W23-JWX6082
Name of Grantee:  JJPlus Corporation
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n 3T3R Mini-PCI Express Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.163  

CIIPC to add model number and to update test standard version.

Single modular approval for Mobile host platform. Power output listed is combined conducted RF power. Device contains 20 and 40 MHz signal bandwidth. Device is Spatial Multiplexing 3x3 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and operation conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain (2dBi) may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application DSeoWocSCj4XHF+XNi/E8w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 09/05/2014

Application Dated: 09/05/2014
JJPlus Corporation
15F-7, No. 2, Jianba Road, Zhonghe Dist.,
New Taipei City,
Taiwan
 
Attention: Jeff Shu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W23-JWX6082
Name of Grantee:  JJPlus Corporation
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n 3T3R Mini-PCI Express Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.227  
CC MO 15C 5745.0  -  5805.0 0.296  

Single modular approval for Mobile host platform. Power output listed is combined conducted RF power. Device contains 20 and 40 MHz signal bandwidth. Device is Spatial Multiplexing 3x3 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and operation conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain (2dBi) may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application DSeoWocSCj4XHF+XNi/E8w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

JJPlus Corporation
15F-7, No. 2, Jianba Road, Zhonghe Dist.,
New Taipei City,
Taiwan
  Date of Grant: 09/05/2014

Application Dated: 09/05/2014
 
Attention: Jeff Shu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W23-JWX6082
Name of Grantee:  JJPlus Corporation
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n 3T3R Mini-PCI Express Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.227  
CC MO 15C 5745.0  -  5805.0 0.296  

Single modular approval for Mobile host platform. Power output listed is combined conducted RF power. Device contains 20 and 40 MHz signal bandwidth. Device is Spatial Multiplexing 3x3 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and operation conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain (2dBi) may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: