FCC ID W2Z-01000011
Embedde wireless module
by Fuji Film Corporation
Grantee Code: W2Z Product Code: 01000011
Latest application date: 2020-11-25
FCC ID Device Details
| FCC ID | W2Z-01000011 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | W2Z |
| Product Code | 01000011 |
| Applicant Business | Fuji Film Corporation 🇯🇵 |
| Related Domains |  fujifilm.com |
| Equipment Class | Embedde wireless module |
| Test Firm | UL Japan, Inc.(Ise) |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2020-11-25 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2020-11-25 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2020-09-30 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2020-09-30 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAC Grant Date: 11/08/2016 | 2020-09-04 |
| 5180-5320 MHz | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAC Grant Date: 11/08/2016 | 2020-09-04 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAC Grant Date: 11/08/2016 | 2020-09-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| 04 User Manual | Users Manual | 2020-09-04 | PDF 274.3 KB |
| 03 External photo | External Photos | 2020-09-04 | PDF 1.6 MB |
| 05 Label and Location | ID Label/Location Info | 2020-09-04 | PDF 618.6 KB |
| 03 Short-Term Confidential_FCC SAR Setup Photo | Test Setup Photos | 2021-05-26 | PDF 1.3 MB |
| 03 Short-Term Confidential_FCC SAR Setup Photo | Test Setup Photos | 2021-03-30 | PDF 1.6 MB |
| 03 Short-Term Confidential_FCC SAR Setup Photo | Test Setup Photos | 2021-03-30 | PDF 93.1 KB |
| 02 FCC Authorization Letter | Cover Letter(s) | 2020-11-25 | PDF 68.7 KB |
| 02 FCC Class II Permissive Change Letter | Cover Letter(s) | 2020-11-25 | PDF 272.3 KB |
| 02 FCC Request for Confidentiality Letter | Cover Letter(s) | 2020-11-25 | PDF 50.6 KB |
| 02 FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2020-11-25 | PDF 54.5 KB |
| 02 FCC Authorization Letter | Cover Letter(s) | 2020-09-30 | PDF 71.5 KB |
| 02 FCC Class II Permissive Change Letter | Cover Letter(s) | 2020-09-30 | PDF 103.2 KB |
| 02 FCC Request for Confidentiality Letter | Cover Letter(s) | 2020-09-30 | PDF 49 KB |
| 02 FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2020-09-30 | PDF 52.7 KB |
| 02 FCC Authorization Letter | Cover Letter(s) | 2020-09-04 | PDF 37.2 KB |
| 02 FCC Declaration Letter of Changing ID_New applicant | Cover Letter(s) | 2020-09-04 | PDF 45.4 KB |
| 02 FCC Declaration Letter of Changing ID_Original applicant | Cover Letter(s) | 2020-09-04 | PDF 108.1 KB |
| 03 FCC SAR Report | RF Exposure Info | 2020-11-25 | PDF 4.6 MB |
| 03 FCC SAR Report | RF Exposure Info | 2020-09-30 | PDF 4.4 MB |
| 04 Confidential_Theory of Operation-Host Label Information Metadata only | Operational Description | PDF 143.8 KB | |
| 04 Confidential_Theory of Operation-Host Label Information Metadata only | Operational Description | PDF 394.8 KB | |
| 04 Confidential_Theory of Operation-Antenna Specification Metadata only | Operational Description | PDF 104.9 KB | |
| 04 Confidential_Theory of Operation-Antenna Specification Metadata only | Operational Description | PDF 146.8 KB | |
| 04 Confidential_Theory of Operation-Host Specification Metadata only | Operational Description | PDF 110.3 KB | |
| 04 Confidential_Theory of Operation-Host Specification Metadata only | Operational Description | PDF 323.3 KB | |
| 04 Confidential_Theory of Operation-Tune up procedure Metadata only | Operational Description | PDF 170.2 KB | |
| 04 Confidential_Theory of Operation-Tune up procedure Metadata only | Operational Description | PDF 93.1 KB |
Application Information
| Application ID | npN1MDoBvRdM0jP338tLRw== |
|---|---|
| Final Action Date | 2020-11-25 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018418608 |
| Model | 01000011 |
| Frequency Range | 5180-5320 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Embedde wireless module |
| Responsible Party | Takao Ozaki, takao.ozaki@fujifilm.com , +81-3-6271-1654 |
| Agent | Shuichi Shuichi Shuichi, UL Japan, Inc., Shuichi.Ohyama@ul.com  , 81-596-24-8999 |
| Technical Contact | Satofumi Matsuyama, UL Japan, Inc., Satofumi.Matsuyama@ul.com , 81-596-24-8999 |
| Test Firm | Takayuki Shimada, UL Japan, Inc.(Ise), Takayuki.Shimada@ul.com , 81-596-24-8999 |
| TCB Email | emc.jp@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 05/26/2021 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add specific portable configuration host described in the filing. Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : DR-ID 1800 FLAT PANEL SENSOR DR-ID 1814SE). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. The highest reported SAR value is 0.03 W/kg : Body-worn. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| npN1MDoBvRdM0jP338tLRw== | 2020-11-25 | Class II permissive change or modification of presently authorized equipment |
| CXOOq7vqfFXnuf4W+0R4zA== | 2020-11-25 | Class II permissive change or modification of presently authorized equipment |
| bDxnLJ5Pj3xlIlqTZ0DYNQ== | 2020-09-30 | Class II permissive change or modification of presently authorized equipment |
| QELNZU3+x6Hoe67y9tRItg== | 2020-09-30 | Class II permissive change or modification of presently authorized equipment |
| wGl3FYb4mmJUzQBDTGJXdw== | 2020-09-04 | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAC Grant Date: 11/08/2016 |
| lNpHAL/BSmJc25rvGhwtqQ== | 2020-09-04 | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAC Grant Date: 11/08/2016 |
| INWsB4rWpBvol/l0C1blkg== | 2020-09-04 | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAC Grant Date: 11/08/2016 |
Equipment Authorization
Grants
TCB Grant - Application wGl3FYb4mmJUzQBDTGJXdw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 09/04/2020 Application Dated: 09/04/2020 |
| Fuji Film Corporation |
| 7-3, AKASAKA 9-CHOME, MINATO-KU |
| Tokyo, 107-0052 Japan |
| Attention: Takao Ozaki |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W2Z-01000011 |
| Name of Grantee: | Fuji Film Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Embedde wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0014 |
| This application is the Change in ID. Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application wGl3FYb4mmJUzQBDTGJXdw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fuji Film Corporation 7-3, AKASAKA 9-CHOME, MINATO-KU Tokyo, 107-0052 Japan |
Date of Grant: 09/04/2020 Application Dated: 09/04/2020 |
| Attention: Takao Ozaki |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W2Z-01000011 |
| Name of Grantee: | Fuji Film Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Embedde wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0014 |
| This application is the Change in ID. Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 09/30/2020 Application Dated: 09/30/2020 |
| Fuji Film Corporation |
| 7-3, AKASAKA 9-CHOME, MINATO-KU |
| Tokyo, 107-0052 Japan |
| Attention: Takao Ozaki |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W2Z-01000011 |
| Name of Grantee: | Fuji Film Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Embedde wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2999 |
| Class II Permissive Change to add specific portable configuration host described in the filing. Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : DR-ID 1800 FLAT PANEL SENSOR DR-ID 1811SE, DR-ID 1800 FLAT PANEL SENSOR DR-ID 1812SE, DR-ID 1800 FLAT PANEL SENSOR DR-ID 1831SE, DR-ID 1800 FLAT PANEL SENSOR DR-ID 1832SE). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The highest reported SAR value is 0.02 W/kg : Body-worn. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application QELNZU3+x6Hoe67y9tRItg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fuji Film Corporation 7-3, AKASAKA 9-CHOME, MINATO-KU Tokyo, 107-0052 Japan |
Date of Grant: 09/30/2020 Application Dated: 09/30/2020 |
| Attention: Takao Ozaki |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W2Z-01000011 |
| Name of Grantee: | Fuji Film Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Embedde wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2999 |
| Class II Permissive Change to add specific portable configuration host described in the filing. Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : DR-ID 1800 FLAT PANEL SENSOR DR-ID 1811SE, DR-ID 1800 FLAT PANEL SENSOR DR-ID 1812SE, DR-ID 1800 FLAT PANEL SENSOR DR-ID 1831SE, DR-ID 1800 FLAT PANEL SENSOR DR-ID 1832SE). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The highest reported SAR value is 0.02 W/kg : Body-worn. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 11/25/2020 Application Dated: 11/25/2020 |
| Fuji Film Corporation |
| 7-3, AKASAKA 9-CHOME, MINATO-KU |
| Tokyo, 107-0052 Japan |
| Attention: Takao Ozaki |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W2Z-01000011 |
| Name of Grantee: | Fuji Film Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Embedde wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5320.0 | 0.0251 | ||
| 38 CC | 15E | 5500.0 - 5700.0 | 0.009 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0139 |
| Class II Permissive Change to add specific portable configuration host described in the filing. Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : DR-ID 1800 FLAT PANEL SENSOR DR-ID 1814SE). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. The highest reported SAR value is 0.03 W/kg : Body-worn. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application npN1MDoBvRdM0jP338tLRw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fuji Film Corporation 7-3, AKASAKA 9-CHOME, MINATO-KU Tokyo, 107-0052 Japan |
Date of Grant: 11/25/2020 Application Dated: 11/25/2020 |
| Attention: Takao Ozaki |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W2Z-01000011 |
| Name of Grantee: | Fuji Film Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Embedde wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5320.0 | 0.0251 | ||
| 38 CC | 15E | 5500.0 - 5700.0 | 0.009 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0139 |
| Class II Permissive Change to add specific portable configuration host described in the filing. Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : DR-ID 1800 FLAT PANEL SENSOR DR-ID 1814SE). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. The highest reported SAR value is 0.03 W/kg : Body-worn. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 09/04/2020 Application Dated: 09/04/2020 |
| Fuji Film Corporation |
| 7-3, AKASAKA 9-CHOME, MINATO-KU |
| Tokyo, 107-0052 Japan |
| Attention: Takao Ozaki |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W2Z-01000011 |
| Name of Grantee: | Fuji Film Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Embedde wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5320.0 | 0.0251 | ||
| 38 CC | 15E | 5500.0 - 5700.0 | 0.009 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0139 |
| This application is the Change in ID. Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application lNpHAL/BSmJc25rvGhwtqQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fuji Film Corporation 7-3, AKASAKA 9-CHOME, MINATO-KU Tokyo, 107-0052 Japan |
Date of Grant: 09/04/2020 Application Dated: 09/04/2020 |
| Attention: Takao Ozaki |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W2Z-01000011 |
| Name of Grantee: | Fuji Film Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Embedde wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5320.0 | 0.0251 | ||
| 38 CC | 15E | 5500.0 - 5700.0 | 0.009 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0139 |
| This application is the Change in ID. Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 09/04/2020 Application Dated: 09/04/2020 |
| Fuji Film Corporation |
| 7-3, AKASAKA 9-CHOME, MINATO-KU |
| Tokyo, 107-0052 Japan |
| Attention: Takao Ozaki |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W2Z-01000011 |
| Name of Grantee: | Fuji Film Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Embedde wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0016 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.2999 |
| This application is the Change in ID. Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application INWsB4rWpBvol/l0C1blkg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fuji Film Corporation 7-3, AKASAKA 9-CHOME, MINATO-KU Tokyo, 107-0052 Japan |
Date of Grant: 09/04/2020 Application Dated: 09/04/2020 |
| Attention: Takao Ozaki |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W2Z-01000011 |
| Name of Grantee: | Fuji Film Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Embedde wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0016 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.2999 |
| This application is the Change in ID. Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 11/25/2020 Application Dated: 11/25/2020 |
| Fuji Film Corporation |
| 7-3, AKASAKA 9-CHOME, MINATO-KU |
| Tokyo, 107-0052 Japan |
| Attention: Takao Ozaki |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W2Z-01000011 |
| Name of Grantee: | Fuji Film Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Embedde wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2999 |
| Class II Permissive Change to add specific portable configuration host described in the filing. Single Modular Approval. Output power listed is Conducted (Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system: DR-ID 1800 FLAT PANEL SENSOR DR-ID 1814SE). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The highest reported SAR value is 0.03 W/kg : Body-worn. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application CXOOq7vqfFXnuf4W+0R4zA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fuji Film Corporation 7-3, AKASAKA 9-CHOME, MINATO-KU Tokyo, 107-0052 Japan |
Date of Grant: 11/25/2020 Application Dated: 11/25/2020 |
| Attention: Takao Ozaki |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W2Z-01000011 |
| Name of Grantee: | Fuji Film Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Embedde wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2999 |
| Class II Permissive Change to add specific portable configuration host described in the filing. Single Modular Approval. Output power listed is Conducted (Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system: DR-ID 1800 FLAT PANEL SENSOR DR-ID 1814SE). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The highest reported SAR value is 0.03 W/kg : Body-worn. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 09/30/2020 Application Dated: 09/30/2020 |
| Fuji Film Corporation |
| 7-3, AKASAKA 9-CHOME, MINATO-KU |
| Tokyo, 107-0052 Japan |
| Attention: Takao Ozaki |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W2Z-01000011 |
| Name of Grantee: | Fuji Film Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Embedde wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5320.0 | 0.0251 | ||
| 38 CC | 15E | 5500.0 - 5700.0 | 0.009 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0139 |
| Class II Permissive Change to add specific portable configuration host described in the filing. Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : Host system : DR-ID 1800 FLAT PANEL SENSOR DR-ID 1811SE, DR-ID 1800 FLAT PANEL SENSOR DR-ID 1812SE, DR-ID 1800 FLAT PANEL SENSOR DR-ID 1831SE, DR-ID 1800 FLAT PANEL SENSOR DR-ID 1832SE). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. The highest reported SAR value is 0.02 W/kg : Body-worn. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application bDxnLJ5Pj3xlIlqTZ0DYNQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fuji Film Corporation 7-3, AKASAKA 9-CHOME, MINATO-KU Tokyo, 107-0052 Japan |
Date of Grant: 09/30/2020 Application Dated: 09/30/2020 |
| Attention: Takao Ozaki |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W2Z-01000011 |
| Name of Grantee: | Fuji Film Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Embedde wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5320.0 | 0.0251 | ||
| 38 CC | 15E | 5500.0 - 5700.0 | 0.009 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0139 |
| Class II Permissive Change to add specific portable configuration host described in the filing. Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : Host system : DR-ID 1800 FLAT PANEL SENSOR DR-ID 1811SE, DR-ID 1800 FLAT PANEL SENSOR DR-ID 1812SE, DR-ID 1800 FLAT PANEL SENSOR DR-ID 1831SE, DR-ID 1800 FLAT PANEL SENSOR DR-ID 1832SE). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. The highest reported SAR value is 0.02 W/kg : Body-worn. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |