FCC ID W38-17-001002-01
802.15.4 Transceiver Module
by ChargePoint, Inc.
Grantee Code: W38 Product Code: 1700100201
Latest application date: 2011-06-01
FCC ID Device Details
| FCC ID | W38-17-001002-01 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | W38 |
| Product Code | 1700100201 |
| Applicant Business | ChargePoint, Inc. 🇺🇸 |
| Related Domains |  chargepoint.com |
| Equipment Class | 802.15.4 Transceiver Module |
| Test Firm | Bay Area Compliance Laboratories Corp. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2405-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2011-06-01 |
| 2405-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2010-11-05 |
| 2405-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2009-02-20 |
| 2405-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: TFB-APEXLT Grant Date: 07/05/2007 | 2009-02-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2010-11-05 | PDF 107.5 KB |
| Internal Photos | Internal Photos | 2009-02-20 | PDF 36 KB |
| External Photos | External Photos | 2010-11-05 | PDF 362.5 KB |
| External Photos | External Photos | 2009-02-20 | PDF 366.7 KB |
| External Photos | External Photos | 2009-02-11 | PDF 233.5 KB |
| FCC ID Label | ID Label/Location Info | 2011-06-01 | PDF 111 KB |
| FCC ID Label | ID Label/Location Info | 2010-11-05 | PDF 103.3 KB |
| FCC ID Label | ID Label/Location Info | 2009-02-20 | PDF 78 KB |
| FCC ID Label | ID Label/Location Info | 2009-02-11 | PDF 127.8 KB |
| Test Setup Photos | Test Setup Photos | 2010-11-05 | PDF 352.9 KB |
| Test Setup Photos | Test Setup Photos | 2009-02-20 | PDF 246.1 KB |
| Test Report | Test Report | 2010-11-05 | PDF 241 KB |
| Test report | Test Report | 2009-02-20 | PDF 241 KB |
| CIIPC Letter | Cover Letter(s) | 2011-06-01 | PDF 50.9 KB |
| PC2Request Letter | Cover Letter(s) | 2010-11-05 | PDF 28.9 KB |
| Class II Permissive Change Request | Cover Letter(s) | 2009-02-20 | PDF 28.3 KB |
| Authorization letter from original Grantee Code Holder | Cover Letter(s) | 2009-02-11 | PDF 34.5 KB |
| Change ID Request Letter | Cover Letter(s) | 2009-02-11 | PDF 37.5 KB |
| MPE Info | RF Exposure Info | 2011-06-01 | PDF 54 KB |
Application Information
| Application ID | D1GNiZnaM6+zyCmXBxv61A== |
|---|---|
| Final Action Date | 2011-06-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018459099 |
| Model | -17-001002-01 |
| Frequency Range | 2405-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.15.4 Transceiver Module |
| Responsible Party | Gary Eldridge, Regulatory Compliance Manager, gary.eldridge@chargepoint.com , 408-841-4536 |
| Test Firm | Kaveh Moraghebi, Bay Area Compliance Laboratories Corp., kaveh@baclcorp.com  , 408-732-9162 |
| TCB Email | bacl.regulatory@baclcorp.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change for the purpose of co-location with other antenna or transmitters described in this filing. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antennas listed in this filing or similar antennas with equal or lesser gain can be used with this module. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| D1GNiZnaM6+zyCmXBxv61A== | 2011-06-01 | Class II permissive change or modification of presently authorized equipment |
| 3dqu1yjdoCcyvzfNJ+SGqg== | 2010-11-05 | Class II permissive change or modification of presently authorized equipment |
| QtiUfe+cXU6D1JuS/9xGqw== | 2009-02-20 | Class II permissive change or modification of presently authorized equipment |
| EAdsY2GjGlW/s1dhEayhdA== | 2009-02-11 | Change in identification of presently authorized equipment. Original FCC ID: TFB-APEXLT Grant Date: 07/05/2007 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2405-2480 MHz | 0.0720000 | 15C |
Grants
TCB Grant - Application QtiUfe+cXU6D1JuS/9xGqw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 02/20/2009 Application Dated: 02/20/2009 |
| ChargePoint, Inc. |
| 254 E. Hacienda Ave |
| Campbell, CA 95008 |
| Attention: Gary Eldridge , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W38-17-001002-01 |
| Name of Grantee: | ChargePoint, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.15.4 Transceiver Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.072 |
| Class II Permissive Change for the purpose of co-location with other intentional radiators in this filing. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antennas listed in this filing or similar antennas with equal or lesser gain can be used with this module. |
EAS Grant - Application QtiUfe+cXU6D1JuS/9xGqw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ChargePoint, Inc. 254 E. Hacienda Ave Campbell, CA 95008 United States |
Date of Grant: 02/20/2009 Application Dated: 02/20/2009 |
| Attention: Gary Eldridge , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W38-17-001002-01 |
| Name of Grantee: | ChargePoint, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.15.4 Transceiver Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.072 |
| Class II Permissive Change for the purpose of co-location with other intentional radiators in this filing. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antennas listed in this filing or similar antennas with equal or lesser gain can be used with this module. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 02/11/2009 Application Dated: 02/11/2009 |
| ChargePoint, Inc. |
| 254 E. Hacienda Ave |
| Campbell, CA 95008 |
| Attention: Gary Eldridge , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W38-17-001002-01 |
| Name of Grantee: | ChargePoint, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.15.4 Transceiver Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.072 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antennas listed in this filing or similar antennas with equal or lesser gain can be used with this module. |
EAS Grant - Application EAdsY2GjGlW/s1dhEayhdA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ChargePoint, Inc. 254 E. Hacienda Ave Campbell, CA 95008 United States |
Date of Grant: 02/11/2009 Application Dated: 02/11/2009 |
| Attention: Gary Eldridge , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W38-17-001002-01 |
| Name of Grantee: | ChargePoint, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.15.4 Transceiver Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.072 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antennas listed in this filing or similar antennas with equal or lesser gain can be used with this module. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 06/01/2011 Application Dated: 06/01/2011 |
| ChargePoint, Inc. |
| 254 E. Hacienda Ave |
| Campbell, CA 95008 |
| Attention: Gary Eldridge , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W38-17-001002-01 |
| Name of Grantee: | ChargePoint, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.15.4 Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.072 |
| Class II Permissive Change for the purpose of co-location with other antenna or transmitters described in this filing. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antennas listed in this filing or similar antennas with equal or lesser gain can be used with this module. |
EAS Grant - Application D1GNiZnaM6+zyCmXBxv61A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ChargePoint, Inc. 254 E. Hacienda Ave Campbell, CA 95008 United States |
Date of Grant: 06/01/2011 Application Dated: 06/01/2011 |
| Attention: Gary Eldridge , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W38-17-001002-01 |
| Name of Grantee: | ChargePoint, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.15.4 Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.072 |
| Class II Permissive Change for the purpose of co-location with other antenna or transmitters described in this filing. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antennas listed in this filing or similar antennas with equal or lesser gain can be used with this module. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 11/05/2010 Application Dated: 11/05/2010 |
| ChargePoint, Inc. |
| 254 E. Hacienda Ave |
| Campbell, CA 95008 |
| Attention: Gary Eldridge , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W38-17-001002-01 |
| Name of Grantee: | ChargePoint, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.15.4 Transceiver Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.072 |
| Class II Permissive Change for adding new antenna and the purpose of co-location with other intentional radiators described in this filing. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antennas listed in this filing or similar antennas with equal or lesser gain can be used with this module. |
EAS Grant - Application 3dqu1yjdoCcyvzfNJ+SGqg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ChargePoint, Inc. 254 E. Hacienda Ave Campbell, CA 95008 United States |
Date of Grant: 11/05/2010 Application Dated: 11/05/2010 |
| Attention: Gary Eldridge , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W38-17-001002-01 |
| Name of Grantee: | ChargePoint, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.15.4 Transceiver Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.072 |
| Class II Permissive Change for adding new antenna and the purpose of co-location with other intentional radiators described in this filing. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antennas listed in this filing or similar antennas with equal or lesser gain can be used with this module. |
| Mail To: |