FCC ID W38-17-001003-01

Dual Band CDMA Wireless Modem

by ChargePoint, Inc.

Grantee Code: W38   Product Code: 1700100301
Latest application date: 2009-02-20

FCC ID Device Details

FCC IDW38-17-001003-01
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeW38
Product Code1700100301
Applicant BusinessChargePoint, Inc. 🇺🇸
Related Domains chargepoint.com
Equipment ClassDual Band CDMA Wireless Modem
Test FirmBay Area Compliance Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.7-848.31 MHzClass II permissive change or modification of presently authorized equipment2009-02-20
824.7-848.31 MHzChange in identification of presently authorized equipment. Original FCC ID: AU792U04A22760 Grant Date: 02/11/20042009-02-11

Exhibits

DocumentTypeAvailableFile
Internal PhotosInternal Photos2009-02-20PDF 188.4 KB
External PhotosExternal Photos2009-02-20PDF 385.7 KB
External PhotosExternal Photos2009-02-11PDF 125.6 KB
FCC ID LabelID Label/Location Info2009-02-20PDF 169.3 KB
FCC ID LabelID Label/Location Info2009-02-11PDF 141.8 KB
Test Setup PhotosTest Setup Photos2009-02-20PDF 299.6 KB
Test ReportTest Report2009-02-20PDF 148.2 KB
Class II Permissive Change RequestCover Letter(s)2009-02-20PDF 28.3 KB
Authorization Letter from Original Grantee HolderCover Letter(s)2009-02-11PDF 53.1 KB
Change ID Request LetterCover Letter(s)2009-02-11PDF 37.5 KB

Application Information

Application IDyJWDiPLBwo3K6NsWKQfYIg==
Final Action Date2009-02-20
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0018459099
Model-17-001003-01
Frequency Range824.7-848.31 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionDual Band CDMA Wireless Modem
Responsible PartyGary Eldridge, Regulatory Compliance Manager, gary.eldridge@chargepoint.com , 408-841-4536
Test FirmJohn Chan, Bay Area Compliance Laboratory, bacl.regulatory@baclcorp.com , 408-732-9162
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change Application for the purpose of co-location with other intentional radiators in this filing. Power Output listed is conducted. The antenna gain, including cable loss, must not exceed 9.5 dBi at 1900 MHz / 8.26 dB at 850 MHz for mobile operating configurations and 13.5 dBi at 1900 MHz / 8.93 dB at 850 MHz for fixed-mounted operations, as defined in 2.1091 and 1.1307 of the rules for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users and Installers must be provided with antenna installation instructions and transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
yJWDiPLBwo3K6NsWKQfYIg==2009-02-20Class II permissive change or modification of presently authorized equipment
gNEi8AC7TEERPB0AqN2Img==2009-02-11Change in identification of presently authorized equipment. Original FCC ID: AU792U04A22760 Grant Date: 02/11/2004

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.7-848.31 MHz0.2240.11ppm11M25F922H
824.7-848.31 MHz0.2240.11ppm1M25F9W22H
1851.25-1908.75 MHz0.2240.11ppm11M25F924E
1851.25-1908.75 MHz0.2240.11ppm1M25F9W24E

Grants

TCB Grant - Application yJWDiPLBwo3K6NsWKQfYIg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 02/20/2009

Application Dated: 02/20/2009
ChargePoint, Inc.
254 E. Hacienda Ave
Campbell, CA 95008
 
Attention: Gary Eldridge , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W38-17-001003-01
Name of Grantee:  ChargePoint, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Dual Band CDMA Wireless Modem
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.224 0.11  PM 1M25F9W
24E 1851.25  -  1908.75 0.224 0.11  PM 1M25F9W

Class II Permissive Change Application for the purpose of co-location with other intentional radiators in this filing. Power Output listed is conducted. The antenna gain, including cable loss, must not exceed 9.5 dBi at 1900 MHz / 8.26 dB at 850 MHz for mobile operating configurations and 13.5 dBi at 1900 MHz / 8.93 dB at 850 MHz for fixed-mounted operations, as defined in 2.1091 and 1.1307 of the rules for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users and Installers must be provided with antenna installation instructions and transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application yJWDiPLBwo3K6NsWKQfYIg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ChargePoint, Inc.
254 E. Hacienda Ave
Campbell, CA 95008
United States
  Date of Grant: 02/20/2009

Application Dated: 02/20/2009
 
Attention: Gary Eldridge , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W38-17-001003-01
Name of Grantee:  ChargePoint, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Dual Band CDMA Wireless Modem
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.224 0.11  PM 1M25F9W
24E 1851.25  -  1908.75 0.224 0.11  PM 1M25F9W

Class II Permissive Change Application for the purpose of co-location with other intentional radiators in this filing. Power Output listed is conducted. The antenna gain, including cable loss, must not exceed 9.5 dBi at 1900 MHz / 8.26 dB at 850 MHz for mobile operating configurations and 13.5 dBi at 1900 MHz / 8.93 dB at 850 MHz for fixed-mounted operations, as defined in 2.1091 and 1.1307 of the rules for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users and Installers must be provided with antenna installation instructions and transmitter operation conditions for satisfying RF exposure compliance.



TCB Grant - Application gNEi8AC7TEERPB0AqN2Img==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 02/11/2009

Application Dated: 02/11/2009
ChargePoint, Inc.
254 E. Hacienda Ave
Campbell, CA 95008
 
Attention: Gary Eldridge , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W38-17-001003-01
Name of Grantee:  ChargePoint, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Dual Band CDMA Wireless Modem
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.224 0.11  PM 11M25F9
24E 1851.25  -  1908.75 0.224 0.11  PM 11M25F9

Power Output listed is conducted. The antenna gain, including cable loss, must not exceed 9.5 dBi at 1900 MHz / 8.26 dB at 850 MHz for mobile operating configurations and 13.5 dBi at 1900 MHz / 8.93 dB at 850 MHz for fixed-mounted operations, as defined in 2.1091 and 1.1307 of the rules for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End Users and Installers must be provided with antenna installation instructions and transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application gNEi8AC7TEERPB0AqN2Img==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ChargePoint, Inc.
254 E. Hacienda Ave
Campbell, CA 95008
United States
  Date of Grant: 02/11/2009

Application Dated: 02/11/2009
 
Attention: Gary Eldridge , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W38-17-001003-01
Name of Grantee:  ChargePoint, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Dual Band CDMA Wireless Modem
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.224 0.11  PM 11M25F9
24E 1851.25  -  1908.75 0.224 0.11  PM 11M25F9

Power Output listed is conducted. The antenna gain, including cable loss, must not exceed 9.5 dBi at 1900 MHz / 8.26 dB at 850 MHz for mobile operating configurations and 13.5 dBi at 1900 MHz / 8.93 dB at 850 MHz for fixed-mounted operations, as defined in 2.1091 and 1.1307 of the rules for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End Users and Installers must be provided with antenna installation instructions and transmitter operation conditions for satisfying RF exposure compliance.



Mail To: