FCC ID W38-241083S

WLAN Module

by ChargePoint, Inc.

Grantee Code: W38   Product Code: 241083S
Latest application date: 2021-03-01

FCC ID Device Details

FCC IDW38-241083S
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeW38
Product Code241083S
Applicant BusinessChargePoint, Inc. 🇺🇸
Related Domains chargepoint.com
Equipment ClassWLAN Module
Test FirmBay Area Compliance Laboratories Corporation

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2021-03-01
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-03-01
5180-5240 MHzOriginal Equipment2019-02-14
2412-2462 MHzOriginal Equipment2019-02-14

Exhibits

DocumentTypeAvailableFile
Installation ManualUsers Manual2019-08-13PDF 251.2 KB
Int Photos (Host)Internal Photos2021-08-28PDF 1.6 MB
Internal Photos hostInternal Photos2019-08-13PDF 564.4 KB
Internal Photos moduleInternal Photos2019-08-13PDF 348.6 KB
Ext PhotosExternal Photos2021-08-28PDF 812.6 KB
External Photos hostExternal Photos2019-08-13PDF 148.6 KB
FCC ID Label (Host)ID Label/Location Info2021-03-01PDF 23.7 KB
MODULE LABELID Label/Location Info2019-02-14PDF 228.9 KB
Module LabelID Label/Location Info2019-02-14PDF 1 MB
module labelID Label/Location Info2019-02-14PDF 1 MB
Setup PhotosTest Setup Photos2021-08-28PDF 296.3 KB
Setup PhotosTest Setup Photos2021-08-28PDF 346.6 KB
Test Setup Photos hostTest Setup Photos2019-08-13PDF 178.8 KB
Test Setup Photos standalone moduleTest Setup Photos2019-08-13PDF 225 KB
Test ReportTest Report2021-03-01PDF 1.1 MB
Test ReportTest Report2021-03-01PDF 1.5 MB
DTS RF Report 241083GTest Report2019-02-14PDF 3.3 MB
DTS RF Report RSETest Report2019-02-14PDF 1.3 MB
NII RF Test ReportTest Report2019-02-14PDF 5.3 MB
RF Colocation ReportTest Report2019-02-14PDF 924.6 KB
Declaration Letter Leveraged dataAttestation Statements2019-02-14PDF 164.3 KB
WIFI Channel 12 and 13 Declaration LetterAttestation Statements2019-02-14PDF 152.3 KB
C2PC LetterCover Letter(s)2021-03-01PDF 51.8 KB
Confidential LetterCover Letter(s)2021-03-01PDF 271.1 KB
Confidentiality LetterCover Letter(s)2019-02-14PDF 120.5 KB
Modular Approval LetterCover Letter(s)2019-02-14PDF 131 KB
Product Certification Representative Auth LetterCover Letter(s)2019-02-14PDF 111.5 KB
RF ExposureRF Exposure Info2021-03-01PDF 123.8 KB
RF ExposureRF Exposure Info2021-03-01PDF 206.3 KB
MPE ReportRF Exposure Info2019-02-14PDF 102.8 KB

Application Information

Application IDkwLf4mdfN3zoJ7VAUCd8Jg==
Final Action Date2021-03-01
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0018459099
Model241083S
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWLAN Module
Responsible PartyThanh Pham, Senior Regulatory Engineer, thanh.pham@chargepoint.com , 408-841-4542
Test FirmLisa Tang, Bay Area Compliance Laboratories Corporation, lisat@baclcorp.com , 408-732-9162
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date08/28/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModule Approval. Power listed is the maximum conducted power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with transmitter operation conditions for satisfying RF exposure compliance. Permissive Change II submission for the purpose to install this module into host device (Model: CPGW), as well as co-location with the cellular module (FCC ID: RI7LE910NAVE) documented in this filing.

Applications

Application IDDatePurpose
kwLf4mdfN3zoJ7VAUCd8Jg==2021-03-01Class II permissive change or modification of presently authorized equipment
XmmAlQNNmBP3FVOYQqyQ1w==2021-03-01Class II permissive change or modification of presently authorized equipment
KkG7DS5M03lme9qP24hyiw==2019-02-14Original Equipment
BbSLheRbp4FEaXO1tgH07A==2019-02-14Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.062000015CCC
5180-5240 MHz0.04215ECC
5745-5825 MHz0.02715ECC

Grants

TCB Grant - Application XmmAlQNNmBP3FVOYQqyQ1w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 03/01/2021

Application Dated: 03/01/2021
ChargePoint, Inc.
254 E. Hacienda Ave
Campbell, CA 95008
 
Attention: Thanh Pham , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W38-241083S
Name of Grantee:  ChargePoint, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.042  
CC 15E 5745.0  -  5825.0 0.027  

Module Approval. Power listed is the maximum conducted power. This device has a 20 MHz, 40 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with transmitter operation conditions for satisfying RF exposure compliance. Permissive Change II submission for the purpose to install this module into host device (Model: CPGW), as well as co-location with the cellular module (FCC ID: RI7LE910NAVE) documented in this filing.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application XmmAlQNNmBP3FVOYQqyQ1w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ChargePoint, Inc.
254 E. Hacienda Ave
Campbell, CA 95008
United States
  Date of Grant: 03/01/2021

Application Dated: 03/01/2021
 
Attention: Thanh Pham , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W38-241083S
Name of Grantee:  ChargePoint, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.042  
CC 15E 5745.0  -  5825.0 0.027  

Module Approval. Power listed is the maximum conducted power. This device has a 20 MHz, 40 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with transmitter operation conditions for satisfying RF exposure compliance. Permissive Change II submission for the purpose to install this module into host device (Model: CPGW), as well as co-location with the cellular module (FCC ID: RI7LE910NAVE) documented in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application kwLf4mdfN3zoJ7VAUCd8Jg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 03/01/2021

Application Dated: 03/01/2021
ChargePoint, Inc.
254 E. Hacienda Ave
Campbell, CA 95008
 
Attention: Thanh Pham , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W38-241083S
Name of Grantee:  ChargePoint, Inc.
Equipment Class: Digital Transmission System
Notes: WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.062  

Module Approval. Power listed is the maximum conducted power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with transmitter operation conditions for satisfying RF exposure compliance. Permissive Change II submission for the purpose to install this module into host device (Model: CPGW), as well as co-location with the cellular module (FCC ID: RI7LE910NAVE) documented in this filing.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application kwLf4mdfN3zoJ7VAUCd8Jg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ChargePoint, Inc.
254 E. Hacienda Ave
Campbell, CA 95008
United States
  Date of Grant: 03/01/2021

Application Dated: 03/01/2021
 
Attention: Thanh Pham , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W38-241083S
Name of Grantee:  ChargePoint, Inc.
Equipment Class: Digital Transmission System
Notes: WLAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.062  

Module Approval. Power listed is the maximum conducted power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with transmitter operation conditions for satisfying RF exposure compliance. Permissive Change II submission for the purpose to install this module into host device (Model: CPGW), as well as co-location with the cellular module (FCC ID: RI7LE910NAVE) documented in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application KkG7DS5M03lme9qP24hyiw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas North America EAW
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 02/14/2019

Application Dated: 02/14/2019
ChargePoint, Inc.
254 E. Hacienda Ave
Campbell, CA 95008
 
Attention: Thanh Pham , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W38-241083S
Name of Grantee:  ChargePoint, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.042  
CC 15E 5745.0  -  5825.0 0.027  

Power listed is the maximum conducted power. This device has a 20 MHz, 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Device has been evaluated with Host model: CT4000 and co-location with cell module (FCC ID: W38-HL7588) and RFID module (FCC ID: W38-UICFG) as described in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application KkG7DS5M03lme9qP24hyiw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ChargePoint, Inc.
254 E. Hacienda Ave
Campbell, CA 95008
United States
  Date of Grant: 02/14/2019

Application Dated: 02/14/2019
 
Attention: Thanh Pham , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W38-241083S
Name of Grantee:  ChargePoint, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.042  
CC 15E 5745.0  -  5825.0 0.027  

Power listed is the maximum conducted power. This device has a 20 MHz, 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Device has been evaluated with Host model: CT4000 and co-location with cell module (FCC ID: W38-HL7588) and RFID module (FCC ID: W38-UICFG) as described in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application BbSLheRbp4FEaXO1tgH07A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas North America EAW
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 02/14/2019

Application Dated: 02/14/2019
ChargePoint, Inc.
254 E. Hacienda Ave
Campbell, CA 95008
 
Attention: Thanh Pham , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W38-241083S
Name of Grantee:  ChargePoint, Inc.
Equipment Class: Digital Transmission System
Notes: WLAN module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.062  

Power listed is the maximum conducted power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Device has been evaluated with Host model: CT4000 and co-location with cell module (FCC ID: W38-HL7588) and RFID module (FCC ID: W38-UICFG) as described in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application BbSLheRbp4FEaXO1tgH07A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ChargePoint, Inc.
254 E. Hacienda Ave
Campbell, CA 95008
United States
  Date of Grant: 02/14/2019

Application Dated: 02/14/2019
 
Attention: Thanh Pham , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W38-241083S
Name of Grantee:  ChargePoint, Inc.
Equipment Class: Digital Transmission System
Notes: WLAN module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.062  

Power listed is the maximum conducted power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Device has been evaluated with Host model: CT4000 and co-location with cell module (FCC ID: W38-HL7588) and RFID module (FCC ID: W38-UICFG) as described in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: