1. FCC ID
  2. W38
  3. W38-HL7588

FCC ID W38-HL7588

Wireless module

by ChargePoint, Inc.

Grantee Code: W38   Product Code: HL7588
Latest application date: 2019-02-14

FCC ID Device Details

FCC IDW38-HL7588
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeW38
Product CodeHL7588
Applicant BusinessChargePoint, Inc. 🇺🇸
Related Domains chargepoint.com
Equipment ClassWireless module
Test FirmSIEMIC, INC.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
706.5-713.5 MHzClass II permissive change or modification of presently authorized equipment2019-02-14
706.5-713.5 MHzChange in identification of presently authorized equipment. Original FCC ID: N7NHL7588 Grant Date: 08/24/20152018-12-04

Exhibits

DocumentTypeAvailableFile
Internal PhotosInternal Photos2019-02-14PDF 564.4 KB
Internal PhotosInternal Photos2018-12-04PDF 113.8 KB
External PhotosExternal Photos2019-02-14PDF 148.6 KB
External PhotosExternal Photos2018-12-04PDF 93.6 KB
labelID Label/Location Info2018-12-04PDF 93.6 KB
Test Setup PhotosTest Setup Photos2019-02-14PDF 178.8 KB
RF Colocation ReportTest Report2019-02-14PDF 924.6 KB
Permissive Change LetterCover Letter(s)2019-02-14PDF 113.1 KB
Product Certification Representative Auth LetterCover Letter(s)2019-02-14PDF 92.4 KB
CHARGEPOINT FCC ID Change Authorization letterCover Letter(s)2018-12-04PDF 65.7 KB
Change of ID request letterCover Letter(s)2018-12-04PDF 103.4 KB
Product Certification Representative Auth LetterCover Letter(s)2018-12-04PDF 92.1 KB
MPE ReportRF Exposure Info2019-02-14PDF 102.8 KB

Application Information

Application IDu8GmWQR44YSu8N0JEnAIsw==
Final Action Date2019-02-14
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0018459099
Model-HL7588
Frequency Range706.5-713.5 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionWireless module
Responsible PartyThanh Pham, Senior Regulatory Engineer, thanh.pham@chargepoint.com , 408-841-4542
Test FirmLeslie Bai, SIEMIC, INC., leslie.bai@siemic.com , 408-526-1188
TCB Emailcb@siemic.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC to add Host CT4000 and co-location with WLAN module (FCC ID: W38-241083S) and RFID module (FCC ID: W38-UICFG). Original Grant Comment: Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 9.72 dBi at 800 MHz and/or 850 MHz, 7.51 dBi at 1900 MHz, 9.74 dBi at 700 MHz and 5.78 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24 and 27. The Grantee is responsible for providing the documentation required for modular use.

Applications

Application IDDatePurpose
u8GmWQR44YSu8N0JEnAIsw==2019-02-14Class II permissive change or modification of presently authorized equipment
g3uce3sZ/exR3ai79SnYyg==2018-12-04Change in identification of presently authorized equipment. Original FCC ID: N7NHL7588 Grant Date: 08/24/2015

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
706.5-713.5 MHz0.2240.027ppm4M50G7D27BC
706.5-713.5 MHz0.2070.027ppm4M50W7D27BC
709-711 MHz0.2230.027ppm8M97G7D27BC
709-711 MHz0.2080.027ppm8M94W7D27BC
779.5-784.5 MHz0.220.027ppm4M51G7D27BC
779.5-784.5 MHz0.2030.027ppm4M50W7D27BC
782 MHz0.2280.027ppm9M01G7D27BC
782 MHz0.2070.027ppm8M97W7D27BC
824.7-848.3 MHz0.2050.025ppm1M09W7D22HBC
829-844 MHz0.2350.025ppm9M01G7D22HBC
829-844 MHz0.2060.025ppm9M01W7D22HBC
1710.7-1754.3 MHz0.2560.015ppm1M09G7D27BC
1710.7-1754.3 MHz0.2160.015ppm1M09W7D27BC
1720-1745 MHz0.2590.015ppm18M0G7D27BC
1720-1745 MHz0.2090.015ppm18M0W7D27BC
1850.7-1909.3 MHz0.2360.015ppm1M09G7D24EBC
1850.7-1909.3 MHz0.2050.015ppm1M09W7D24EBC
1852.4-1907.6 MHz0.3550.015ppm4M14F9W24EBC
1860-1900 MHz0.2280.015ppm18M0W7D24EBC
1860-1900 MHz0.2470.015ppm18M0G7D24EBC

Grants

TCB Grant - Application u8GmWQR44YSu8N0JEnAIsw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas North America EAW
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 02/14/2019

Application Dated: 02/14/2019
ChargePoint, Inc.
254 E. Hacienda Ave
Campbell, CA 95008
 
Attention: Thanh Pham , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W38-HL7588
Name of Grantee:  ChargePoint, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Wireless module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 826.4  -  846.6 0.298 0.025  PM 4M11F9W
BC 22H 824.7  -  848.3 0.226 0.025  PM 1M09G7D
BC 22H 824.7  -  848.3 0.205 0.025  PM 1M09W7D
BC 22H 829.0  -  844.0 0.235 0.025  PM 9M01G7D
BC 22H 829.0  -  844.0 0.206 0.025  PM 9M01W7D
BC 24E 1852.4  -  1907.6 0.355 0.015  PM 4M14F9W
BC 24E 1850.7  -  1909.3 0.236 0.015  PM 1M09G7D
BC 24E 1850.7  -  1909.3 0.205 0.015  PM 1M09W7D
BC 24E 1860.0  -  1900.0 0.247 0.015  PM 18M0G7D
BC 24E 1860.0  -  1900.0 0.228 0.015  PM 18M0W7D
BC 27 779.5  -  784.5 0.22 0.027  PM 4M51G7D
BC 27 779.5  -  784.5 0.203 0.027  PM 4M50W7D
BC 27 782.0  -  782.0 0.228 0.027  PM 9M01G7D
BC 27 782.0  -  782.0 0.207 0.027  PM 8M97W7D
BC 27 706.5  -  713.5 0.224 0.027  PM 4M50G7D
BC 27 706.5  -  713.5 0.207 0.027  PM 4M50W7D
BC 27 709.0  -  711.0 0.223 0.027  PM 8M97G7D
BC 27 709.0  -  711.0 0.208 0.027  PM 8M94W7D
BC 27 1710.7  -  1754.3 0.256 0.015  PM 1M09G7D
BC 27 1710.7  -  1754.3 0.216 0.015  PM 1M09W7D
BC 27 1720.0  -  1745.0 0.259 0.015  PM 18M0G7D
BC 27 1720.0  -  1745.0 0.209 0.015  PM 18M0W7D

C2PC to add Host CT4000 and co-location with WLAN module (FCC ID: W38-241083S) and RFID module (FCC ID: W38-UICFG).

Original Grant Comment: Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 9.72 dBi at 800 MHz and/or 850 MHz, 7.51 dBi at 1900 MHz, 9.74 dBi at 700 MHz and 5.78 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24 and 27. The Grantee is responsible for providing the documentation required for modular use.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application u8GmWQR44YSu8N0JEnAIsw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ChargePoint, Inc.
254 E. Hacienda Ave
Campbell, CA 95008
United States 		  Date of Grant: 02/14/2019

Application Dated: 02/14/2019
 
Attention: Thanh Pham , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W38-HL7588
Name of Grantee:  ChargePoint, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Wireless module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 826.4  -  846.6 0.298 0.025  PM 4M11F9W
BC 22H 824.7  -  848.3 0.226 0.025  PM 1M09G7D
BC 22H 824.7  -  848.3 0.205 0.025  PM 1M09W7D
BC 22H 829.0  -  844.0 0.235 0.025  PM 9M01G7D
BC 22H 829.0  -  844.0 0.206 0.025  PM 9M01W7D
BC 24E 1852.4  -  1907.6 0.355 0.015  PM 4M14F9W
BC 24E 1850.7  -  1909.3 0.236 0.015  PM 1M09G7D
BC 24E 1850.7  -  1909.3 0.205 0.015  PM 1M09W7D
BC 24E 1860.0  -  1900.0 0.247 0.015  PM 18M0G7D
BC 24E 1860.0  -  1900.0 0.228 0.015  PM 18M0W7D
BC 27 779.5  -  784.5 0.22 0.027  PM 4M51G7D
BC 27 779.5  -  784.5 0.203 0.027  PM 4M50W7D
BC 27 782.0  -  782.0 0.228 0.027  PM 9M01G7D
BC 27 782.0  -  782.0 0.207 0.027  PM 8M97W7D
BC 27 706.5  -  713.5 0.224 0.027  PM 4M50G7D
BC 27 706.5  -  713.5 0.207 0.027  PM 4M50W7D
BC 27 709.0  -  711.0 0.223 0.027  PM 8M97G7D
BC 27 709.0  -  711.0 0.208 0.027  PM 8M94W7D
BC 27 1710.7  -  1754.3 0.256 0.015  PM 1M09G7D
BC 27 1710.7  -  1754.3 0.216 0.015  PM 1M09W7D
BC 27 1720.0  -  1745.0 0.259 0.015  PM 18M0G7D
BC 27 1720.0  -  1745.0 0.209 0.015  PM 18M0W7D

C2PC to add Host CT4000 and co-location with WLAN module (FCC ID: W38-241083S) and RFID module (FCC ID: W38-UICFG).

Original Grant Comment: Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 9.72 dBi at 800 MHz and/or 850 MHz, 7.51 dBi at 1900 MHz, 9.74 dBi at 700 MHz and 5.78 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24 and 27. The Grantee is responsible for providing the documentation required for modular use.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application g3uce3sZ/exR3ai79SnYyg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 12/04/2018

Application Dated: 12/04/2018
ChargePoint, Inc.
254 E. Hacienda Ave
Campbell, CA 95008
 
Attention: Thanh Pham , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W38-HL7588
Name of Grantee:  ChargePoint, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Wireless module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 826.4  -  846.6 0.298 0.025  PM 4M11F9W
BC 22H 824.7  -  848.3 0.226 0.025  PM 1M09G7D
BC 22H 824.7  -  848.3 0.205 0.025  PM 1M09W7D
BC 22H 829.0  -  844.0 0.235 0.025  PM 9M01G7D
BC 22H 829.0  -  844.0 0.206 0.025  PM 9M01W7D
BC 24E 1852.4  -  1907.6 0.355 0.015  PM 4M14F9W
BC 24E 1850.7  -  1909.3 0.236 0.015  PM 1M09G7D
BC 24E 1850.7  -  1909.3 0.205 0.015  PM 1M09W7D
BC 24E 1860.0  -  1900.0 0.247 0.015  PM 18M0G7D
BC 24E 1860.0  -  1900.0 0.228 0.015  PM 18M0W7D
BC 27 779.5  -  784.5 0.22 0.027  PM 4M51G7D
BC 27 779.5  -  784.5 0.203 0.027  PM 4M50W7D
BC 27 782.0  -  782.0 0.228 0.027  PM 9M01G7D
BC 27 782.0  -  782.0 0.207 0.027  PM 8M97W7D
BC 27 706.5  -  713.5 0.224 0.027  PM 4M50G7D
BC 27 706.5  -  713.5 0.207 0.027  PM 4M50W7D
BC 27 709.0  -  711.0 0.223 0.027  PM 8M97G7D
BC 27 709.0  -  711.0 0.208 0.027  PM 8M94W7D
BC 27 1710.7  -  1754.3 0.256 0.015  PM 1M09G7D
BC 27 1710.7  -  1754.3 0.216 0.015  PM 1M09W7D
BC 27 1720.0  -  1745.0 0.259 0.015  PM 18M0G7D
BC 27 1720.0  -  1745.0 0.209 0.015  PM 18M0W7D

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 9.72 dBi at 800 MHz and/or 850 MHz, 7.51 dBi at 1900 MHz, 9.74 dBi at 700 MHz and 5.78 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24 and 27. The Grantee is responsible for providing the documentation required for modular use.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application g3uce3sZ/exR3ai79SnYyg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ChargePoint, Inc.
254 E. Hacienda Ave
Campbell, CA 95008
United States 		  Date of Grant: 12/04/2018

Application Dated: 12/04/2018
 
Attention: Thanh Pham , Senior Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W38-HL7588
Name of Grantee:  ChargePoint, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Wireless module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 826.4  -  846.6 0.298 0.025  PM 4M11F9W
BC 22H 824.7  -  848.3 0.226 0.025  PM 1M09G7D
BC 22H 824.7  -  848.3 0.205 0.025  PM 1M09W7D
BC 22H 829.0  -  844.0 0.235 0.025  PM 9M01G7D
BC 22H 829.0  -  844.0 0.206 0.025  PM 9M01W7D
BC 24E 1852.4  -  1907.6 0.355 0.015  PM 4M14F9W
BC 24E 1850.7  -  1909.3 0.236 0.015  PM 1M09G7D
BC 24E 1850.7  -  1909.3 0.205 0.015  PM 1M09W7D
BC 24E 1860.0  -  1900.0 0.247 0.015  PM 18M0G7D
BC 24E 1860.0  -  1900.0 0.228 0.015  PM 18M0W7D
BC 27 779.5  -  784.5 0.22 0.027  PM 4M51G7D
BC 27 779.5  -  784.5 0.203 0.027  PM 4M50W7D
BC 27 782.0  -  782.0 0.228 0.027  PM 9M01G7D
BC 27 782.0  -  782.0 0.207 0.027  PM 8M97W7D
BC 27 706.5  -  713.5 0.224 0.027  PM 4M50G7D
BC 27 706.5  -  713.5 0.207 0.027  PM 4M50W7D
BC 27 709.0  -  711.0 0.223 0.027  PM 8M97G7D
BC 27 709.0  -  711.0 0.208 0.027  PM 8M94W7D
BC 27 1710.7  -  1754.3 0.256 0.015  PM 1M09G7D
BC 27 1710.7  -  1754.3 0.216 0.015  PM 1M09W7D
BC 27 1720.0  -  1745.0 0.259 0.015  PM 18M0G7D
BC 27 1720.0  -  1745.0 0.209 0.015  PM 18M0W7D

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 9.72 dBi at 800 MHz and/or 850 MHz, 7.51 dBi at 1900 MHz, 9.74 dBi at 700 MHz and 5.78 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24 and 27. The Grantee is responsible for providing the documentation required for modular use.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To: