FCC ID W3TSRMGV2

WI-FI RADIO

by SEON Design Inc.

Grantee Code: W3T   Product Code: SRMGV2
Latest application date: 2009-02-13

FCC ID Device Details

FCC IDW3TSRMGV2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeW3T
Product CodeSRMGV2
Applicant BusinessSEON Design Inc. 🇨🇦
Related Domains seon.com
Equipment ClassWI-FI RADIO
Test FirmLabTest Certification Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5260-5320 MHzChange in identification of presently authorized equipment. Original FCC ID: RTPWCB-200 Grant Date: 01/21/20082009-02-13
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: RTPWCB-200 Grant Date: 01/21/20082009-02-13

Exhibits

DocumentTypeAvailableFile
External PhotosExternal Photos2009-02-13PDF 590.9 KB
Label InfoID Label/Location Info2009-02-13PDF 41.1 KB
TEST REPORTTest Report2009-02-13PDF 1.1 MB
Cover LetterCover Letter(s)2009-02-13PDF 513.4 KB

Application Information

Application IDXeqpk1nrn0OB3ii76GBnMQ==
Final Action Date2009-02-13
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: RTPWCB-200 Grant Date: 01/21/2008
Applicant FRN0018440602
ModelSRMGV2
Frequency Range5260-5320 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWI-FI RADIO
Responsible PartyDavid Gordon, VP Engineering, dgordon@seon.com , (604)941-0880
Test FirmKavinder Dhillon, LabTest Certification Inc., kdhillon@labtestcert.com , 6042470444
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm form all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
Xeqpk1nrn0OB3ii76GBnMQ==2009-02-13Change in identification of presently authorized equipment. Original FCC ID: RTPWCB-200 Grant Date: 01/21/2008
K4ZcLgCK398Bz53VOaHyGw==2009-02-13Change in identification of presently authorized equipment. Original FCC ID: RTPWCB-200 Grant Date: 01/21/2008

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.085000015CCC
5260-5320 MHz0.0283115ECC, ND
5500-5700 MHz0.0339615ECC, ND

Grants

TCB Grant - Application Xeqpk1nrn0OB3ii76GBnMQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 02/13/2009

Application Dated: 02/13/2009
SEON Design Inc.
Unit 111 - 3B Burbidge Street
Coquitlam, V3K 7B2
Canada
 
Attention: David Gordon , VP Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W3TSRMGV2
Name of Grantee:  SEON Design Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WI-FI RADIO
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC ND 15E 5260.0  -  5320.0 0.02831  
CC ND 15E 5500.0  -  5700.0 0.03396  

Power listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm form all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application Xeqpk1nrn0OB3ii76GBnMQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SEON Design Inc.
Unit 111 - 3B Burbidge Street P.O. Box ,
Coquitlam, V3K 7B2
Canada
  Date of Grant: 02/13/2009

Application Dated: 02/13/2009
 
Attention: David Gordon , VP Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W3TSRMGV2
Name of Grantee:  SEON Design Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WI-FI RADIO
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC ND 15E 5260.0  -  5320.0 0.02831  
CC ND 15E 5500.0  -  5700.0 0.03396  

Power listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm form all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application K4ZcLgCK398Bz53VOaHyGw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 02/13/2009

Application Dated: 02/13/2009
SEON Design Inc.
Unit 111 - 3B Burbidge Street
Coquitlam, V3K 7B2
Canada
 
Attention: David Gordon , VP Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W3TSRMGV2
Name of Grantee:  SEON Design Inc.
Equipment Class: Digital Transmission System
Notes: WI-FI RADIO
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.085  

Power listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm form all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application K4ZcLgCK398Bz53VOaHyGw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SEON Design Inc.
Unit 111 - 3B Burbidge Street P.O. Box ,
Coquitlam, V3K 7B2
Canada
  Date of Grant: 02/13/2009

Application Dated: 02/13/2009
 
Attention: David Gordon , VP Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  W3TSRMGV2
Name of Grantee:  SEON Design Inc.
Equipment Class: Digital Transmission System
Notes: WI-FI RADIO
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.085  

Power listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm form all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: