FCC ID W56MTPCIE-BW-A
MTPCIE-BW
by ZOLL Manufacturing Corporation
Grantee Code: W56 Product Code: MTPCIEBWA
Latest application date: 2016-08-09
Device Images
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2016-08-09 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-08-09 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLBTN Grant Date: 07/29/2011 | 2016-06-16 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLBTN Grant Date: 07/29/2011 | 2016-06-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user manual | Users Manual | 2016-08-09 | PDF 3.5 MB |
| Internal Photos | Internal Photos | 2016-08-09 | PDF 740.8 KB |
| External Photos | External Photos | 2016-08-09 | PDF 408.4 KB |
| External photos | External Photos | 2016-06-16 | PDF 69.9 KB |
| ID Label | ID Label/Location Info | 2016-06-16 | PDF 66.5 KB |
| Antenna info | Operational Description | 2016-08-09 | PDF 513 KB |
| Test setup photos | Test Setup Photos | 2016-08-09 | PDF 481.4 KB |
| Test Report | Test Report | 2016-08-09 | PDF 747.1 KB |
| Test report | Test Report | 2016-08-09 | PDF 749 KB |
| Cover letter | Cover Letter(s) | 2016-08-09 | PDF 61.9 KB |
| Cover letter | Cover Letter(s) | 2016-06-16 | PDF 249.3 KB |
| RF Exposure | RF Exposure Info | 2016-08-09 | PDF 518.2 KB |
| SAR report | RF Exposure Info | 2016-08-09 | PDF 2.4 MB |
Application Information
| Application ID | oY6bAsWN23cEbEEYip6Lxg== |
|---|---|
| Final Action Date | 2016-08-09 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018524090 |
| Model | MTPCIE-BW-A |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | MTPCIE-BW |
| Responsible Party | Gene Partin, Director, QA & Regulatory Affairs, gpartin@zoll.com  , 412-968-3333 |
| Test Firm | Greg Kiemel, Northwest EMC, Inc., gkiemel@nwemc.com  , 503-844-4066 |
| TCB Email | gkiemel@nwemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications the antennas must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. When installed in the Zoll LifeVest Model 5000, the highest reported SAR is 0.13 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| oY6bAsWN23cEbEEYip6Lxg== | 2016-08-09 | Class II permissive change or modification of presently authorized equipment |
| W9hqRYKDiLdDejGIFmJrjA== | 2016-08-09 | Class II permissive change or modification of presently authorized equipment |
| LXVIh/SHQV7W4J0yOxgp8g== | 2016-06-16 | Change in identification of presently authorized equipment. Original FCC ID: VPYLBTN Grant Date: 07/29/2011 |
| 9BusGDfzs9/huhkGt1pivg== | 2016-06-16 | Change in identification of presently authorized equipment. Original FCC ID: VPYLBTN Grant Date: 07/29/2011 |
Equipment Authorization
Grants
TCB Grant - Application W9hqRYKDiLdDejGIFmJrjA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 08/09/2016 Application Dated: 08/09/2016 |
| ZOLL Manufacturing Corporation |
| 121 Gamma Drive |
| Pittsburgh, PA 15238 |
| Attention: Gene Partin , Director, QA & Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W56MTPCIE-BW-A |
| Name of Grantee: | ZOLL Manufacturing Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | MTPCIE-BW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0084 |
| Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application W9hqRYKDiLdDejGIFmJrjA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ZOLL Manufacturing Corporation 121 Gamma Drive Pittsburgh, PA 15238 United States |
Date of Grant: 08/09/2016 Application Dated: 08/09/2016 |
| Attention: Gene Partin , Director, QA & Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W56MTPCIE-BW-A |
| Name of Grantee: | ZOLL Manufacturing Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | MTPCIE-BW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0084 |
| Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 08/09/2016 Application Dated: 08/09/2016 |
| ZOLL Manufacturing Corporation |
| 121 Gamma Drive |
| Pittsburgh, PA 15238 |
| Attention: Gene Partin , Director, QA & Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W56MTPCIE-BW-A |
| Name of Grantee: | ZOLL Manufacturing Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | MTPCIE-BW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2642 |
| Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications the antennas must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. When installed in the Zoll LifeVest Model 5000, the highest reported SAR is 0.13 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application oY6bAsWN23cEbEEYip6Lxg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ZOLL Manufacturing Corporation 121 Gamma Drive Pittsburgh, PA 15238 United States |
Date of Grant: 08/09/2016 Application Dated: 08/09/2016 |
| Attention: Gene Partin , Director, QA & Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W56MTPCIE-BW-A |
| Name of Grantee: | ZOLL Manufacturing Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | MTPCIE-BW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2642 |
| Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications the antennas must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. When installed in the Zoll LifeVest Model 5000, the highest reported SAR is 0.13 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 06/16/2016 Application Dated: 06/16/2016 |
| ZOLL Manufacturing Corporation |
| 121 Gamma Drive |
| Pittsburgh, PA 15238 |
| Attention: Gene Partin , Director, QA & Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W56MTPCIE-BW-A |
| Name of Grantee: | ZOLL Manufacturing Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | MTPCIE-BW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2642 |
| Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application LXVIh/SHQV7W4J0yOxgp8g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ZOLL Manufacturing Corporation 121 Gamma Drive Pittsburgh, PA 15238 United States |
Date of Grant: 06/16/2016 Application Dated: 06/16/2016 |
| Attention: Gene Partin , Director, QA & Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W56MTPCIE-BW-A |
| Name of Grantee: | ZOLL Manufacturing Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | MTPCIE-BW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2642 |
| Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 06/16/2016 Application Dated: 06/16/2016 |
| ZOLL Manufacturing Corporation |
| 121 Gamma Drive |
| Pittsburgh, PA 15238 |
| Attention: Gene Partin , Director, QA & Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W56MTPCIE-BW-A |
| Name of Grantee: | ZOLL Manufacturing Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | MTPCIE-BW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0084 |
| Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 9BusGDfzs9/huhkGt1pivg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ZOLL Manufacturing Corporation 121 Gamma Drive Pittsburgh, PA 15238 United States |
Date of Grant: 06/16/2016 Application Dated: 06/16/2016 |
| Attention: Gene Partin , Director, QA & Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W56MTPCIE-BW-A |
| Name of Grantee: | ZOLL Manufacturing Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | MTPCIE-BW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0084 |
| Output power listed is Conducted. For OEM integration only - device cannot be sold to general public. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |